0283 “E” SERIES The 283 filter is a compact, single phase, high current device with very good common mode and differential mode insertion loss. It is very useful in power control systems. This "E" configuration is identical to our 283 series except that the ground coil has been eliminated for use in "Stand Alone" situations. The enclosure has also been modified to match a standard filter enclosure configuration. Operating voltage = 115/250 Vac Operating current = 20, 30 Amp MTBF on the 20amp filter = 363,174 hours GB Operating frequency = 50/60Hz Operating temperature = -20 to 50 o C Diel. withstanding (line - case) = 1500 Vac Diel. withstanding (line - line) = 1500 Vdc Leakage current = 1.5 ma at 250 Vac, 60 Hz Max residual voltage after 1 sec. = 30 Volts Agency approvals = UL, CSA, VDE Ordering Information 20 AMPS LL-0283-20E 30 AMPS LL-0283-30E USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 EUR JMK Inc Glasgow G13 1DN Scotland UK PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884