GAS SYSTEM SERIES 400 BIOGAS 480V / 60 Hz NOx < 500 mg/Nm3 SYSTEM RATINGS Gas genset with optional heat recovery (90°/70°C heating water circuit) Genset Type Engine Type MTU 6R400 GS MTU 6R400 GS MTU 12V400 GS B3066 L8 B3066 Z8 B3042 Z7 Output Elect.1) kWel. 175 200 350 Therm.2) kWth. 139 150 239 Exhaust3) kWth. (°C) 94 (180) 146 (180) 226 (180) Low Temp. kWth. (°C) --13 (50) --- 1) Rated power at nominal voltage, power factor = 1,0 and nominal frequency 2) Heat output from engine cooling with tolerance of ± 8% 3) Heat output from exhaust (exhaust cooling to 180°C) with tolerance of ± 8% 4) Performance data in accordance with ISO 3046/I-2002 with tolerance of 5% 5) Referenced methane number Project specific data on request: - different alternator voltage - different flow-/return-temperatures, hot cooling, methane number, installation conditions etc. - Container Energy input4) kW 491 559 951 Efficiency Electr. nel. (%) 35.6 35.7 36.8 Total ntot (%) 83.0 88.7 85.7 Methane number5) ≥ 120 ≥ 120 ≥ 120 DS EMA 1 M12*1.5 H DRAWINGS AND DIMENSIONS SS 93.25114-0067 93.25114-0067 TP65-230/2/50Hz L B W Note: This drawing is provided for reference only and should not be used for installation planning. Genset Type MTU 6R400 GS (L8) MTU 6R400 GS (Z8) MTU 12V400 GS (Z7) Dimensions Genset (L x W x H) --- 3370 x 1750 x 2100 mm 3940 x 1690 x 2130 mm Cogeneration module (L x W x H) 3680 x 1870 x 2140 mm 3680 x 1870 x 2140 mm 3820 x 1840 x 2260 mm 3066 Configuration No. of cylinders Bore/Stroke Cyl. displacement Rated speed in-line 6 130/155 mm 2.06 lit. 1800 rpm 3042 Configuration No. of cylinders Bore/Stroke Cyl. displacement Rated speed 90°V 12 130/142 mm 1.88 lit. 1800 rpm DESIGN AND EQUIPMENT (EXTRACT) // Sliding gear starter 24V // Gas supply with electronically controlled gas metering valve // Electronic high-voltage capacitor ignition system with one ignition coil per cylinder // Electronic speed governor for speed and power output control with automatic knocking control Any specifications, descriptions, values, data or other information related to dimensions, power or other technical performance criteria of the goods as provided in this general productinformation are to be understood as non-binding and may be subject to further changes such as but not limited to technical evolution at any time. Version: 01.08.2014, materials and specifications subject to change without notice due to technical advances. MTU Onsite Energy A Rolls-Royce Power Systems Brand www.mtuonsiteenergy.com Subject to change. | 3236771 | Edition 02/14 | ENC 2014-08 | Printed in Germany on chlorine-free bleached papaer. ENGINE DATA