PDF

v00.0902
QS16G (E) – 16 LEAD PLASTIC QSOP
PACKAGE WITH EXPOSED BASE
PACKAGE OUTLINES
QS16G (E) Package Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
Package Information
Part Number Suffix
Package Body Material
Lead Finish
MSL Rating
QS16G
RoHS Compliant Mold Compound
Sn/Pb Solder
MSL1
QS16GE
RoHS Compliant Mold Compound
100% matte Sn
MSL1
Package Marking [3][4]
[1]
HMCNNN
XXXX
[2]
HMCNNN
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
[4] 3-Digit part number NNN
B - 30
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
v00.0902
QS16G (E) – 16 LEAD PLASTIC QSOP
PACKAGE WITH EXPOSED BASE
PACKAGE OUTLINES
Suggested QS16G (E) PCB Land Pattern
NOTES:
1. DIMENSIONS ARE IN INCHES [MILLIMETERS].
2. PAD WIDTH SHOWN IS FOR SOLDERING ONLY. BEYOND SOLDERING AREA ALL CONDUCTORS THAT
CARRY RF AND MICROWAVE SIGNALS SHOULD HAVE 50 OHM CHARACTERISTIC IMPEDANCE.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
B - 17