Series ICs for use with Crystal Oscillators (PLL built‐in) ◆CMOS ■Applications ◆Oscillation Frequency ●Crystal Oscillation Modules : 10MHz ~ 25MHz ◆Output Frequency : 80MHz ~ 160MHz (5.0V) ●Computer, DSP Clocks : 50MHz ~ 125MHz (3.3V) ◆Divider Circuit & PLL Circuit Built-In ●Communication Equipment ●Various System Clocks ◆3-State Output ◆Oscillation Capacitor & Oscillation Feedback Resistor Built-In ◆Mini Mold SOT-26 Package ■General Description ■Features The XC2173 series are high frequency, low power consumption CMOS ICs with built-in crystal oscillator, divider and clock multiplier PLL circuits. Output is selectable from any one of the following values for f0 : f0 x 5, f0 x 6, f0 x 7, f0 x 8, f0/2, f0/4, f0/8. With an oscillation capacitor & oscillation feedback resistor built-in, a stable oscillator circuit can be put together using only an external crystal oscillator. By connecting an external standard clock, the above mentioned output frequencies can be achieved. Oscillation Frequency : 10MHz ~ 25MHz Divider Ratio : f0/2, f0/4, f0/8 Multiplier : f0 x 5, f0 x 6, f0 x 7, f0 x 8 Output : 3-State Operating Voltage Range : 3.3V ±10% and 5.0V ±10% Small Consumption Current : Stand-by function included* * oscillation continues in stand-by Ultra Small Package : SOT-26 mini mold ■Pin Configuration ■Pin Assignment /INH 1 ６ /XT XT ２ ５ VDD VSS ３ ４ QO PIN NUMBER PIN NAME FUNCTION 1 /INH Stand-by control* 2 XT Crystal Oscillator Connection (Input) 3 VSS GND 4 Qo Clock Output 5 VDD Power Supply /XT Crystal Oscillator Connection (Output) / Standard Clock Input SOT-26 ( TOP VIEW ) 6 * Stand-by control pin has pull-up resistor built-in. ■INH - B, Q0 Pin Function /INH "H" "L" OPEN "H" = High Level "L" = Low Level 14 Q0 Divider/Multiplier Output High Impedance (Stand-by) Divider/Multiplier Output 1039 XC2173 Series ■Product Classification ●Ordering Information ＸＣ２１７３qwerty ↑↑↑↑↑↑ ａｂｃｄｅｆ DESIGNATOR DESCRIPTION DESIGNATOR Duty Level : ａ Input Oscillation Frequency Range ｄ C : CMOS（VDD/2） 1 : 10MHz to 25MHz Output Capacity : ｂ Package : ｅ M : Multiplier Output M = SOT-26 D : Divider Output Device Orientation : Multiplier Ratio or Divider Ratio ｃ DESCRIPTION R = Embossed Tape 2 : f0 / 2 6 : f0 x 6 4 : f0 / 4 7 : f0 x 7 5 : f0 x 5 8 : f0 / 8 & f0 x 8 (Standard Feed) ｆ L= Embossed Tape (Reverse Feed) ■Packaging Information ●SOT-26 +0.1 0.15 -0.05 +0.1 0.4 -0.05 （0.5） +0.2 -0.1 0.4 0.2min 1.6 2.8±0.2 0∼0.1 +0.1 -0.05 （0.95） 1.1±0.1 1.9±0.2 2.9±0.2 ■Marking MARK 7 q Represents the Series name ６ 14 q 1 ４ ５ w e ２ r ３ SOT-26 (TOP VIEW) 1040 w Represents the Output SYMBOL OUTPUT Ｍ Multiplier Ｄ Divider e Represents the Multiplier and/or Divider Ratio SYMBOL M/D SYMBOL M/D ２ f0/2 ６ f0 x 6 ４ f0/4 ７ f0 x 7 ５ f0/5 ８ f0/8 & f0 x 8 r Represents the Assembly Lot No. (based on internal standards) XC2173 Series ■Block Diagram ■Absolute Maximum Ratings QO PARAMETER SYMBOL CONDITIONS UNITS Supply Voltage VDD VSS-0.3∼VSS+7.0 V Input Voltage VIN VSS-0.3∼VDD+0.3 V Power Dissipation Pd 250 (*3) mW Operating Ambient Temp. Topr -40∼+85 ℃ Storage Temp. Tstg -55∼+125 ℃ VDD Cg Rup Rf Cd 1/2 1/2 1/2 XT /XT VSS PLL /INH * When measured on a glass epoxy PCB ■ /INH Qo端子真理値表 ■Electrical Characteristics 3.3V, f0 x 8 multiplier (note 1) Ta=25℃ PARAMETER SYMBOL Operating Voltage 'H' Level Input Voltage CONDITIONS MIN TYP MAX VDD 2.97 3.3 3.63 VIH 2.4 UNITS Ｖ Ｖ 0.4 Ｖ 0.4 Ｖ 'L' Level Input Voltage VIL 'H' Level Output Voltage VOH CMOS: VDD=2.97V, IOH=-8mA 'L' Level Output Voltage VOL CMOS: VDD=2.97V, IOL=8mA Consumption Current 1 IDD1 /INH="OPEN", CL=15pF, f=80MHz 10 Consumption Current 2 IDD2 /INH="L", CL=15pF, f=80MHz 1 Input pull up resistance 1 Rup1 /INH="L" 1.0 2.0 4.0 MΩ Input pull up resistance 2 Rup2 /INH=0.7VDD 35 70 140 kΩ Internal Oscillation Capacitance Cg (note 3) 13 pF Cd (note 3) 13 pF Internal Oscillation Feedback Resistance Rf Output Off Leak Current Ioz /INH="L" PARAMETER SYMBOL CONDITIONS Operating Voltage 'H' Level Input Voltage 2.47 0.3 Ｖ 1.0 mA mA 2.0 MΩ 10 µA UNITS 5.0V, f0 x 8 multiplier (note 2) Ta=25℃ MIN TYP MAX VDD 4.5 5.0 5.5 VIH 2.4 'L' Level Input Voltage VIL 'H' Level Output Voltage VOH CMOS: VDD=4.5V, IOH=-16mA 'L' Level Output Voltage VOL CMOS: VDD=4.5V, IOL=16mA 0.3 Consumption Current 1 IDD1 /INH="OPEN", CL=15pF, f=160MHz 35 0.4 3.9 Ｖ Ｖ 4.2 Ｖ Ｖ 0.4 Ｖ mA Consumption Current 2 IDD2 /INH="L", CL=15pF, f=160MHz Input pull up resistance 1 Rup1 /INH="L" 0.5 Input pull up resistance 2 Rup2 /INH=0.7VDD 25 Internal Oscillation Capacitance Cg (note 3) 13 pF Cd (note 3) 13 pF Internal Oscillation Feedback Resistance Rf Output Off Leak Current Ioz 5 100 /INH="L" mA 1.0 2.0 MΩ 50 100 kΩ 240 400 kΩ 10 µA 14 note 1 : The output frequency range is 80 MHz to 100MHz with a multiplier of f0 x 8 at 3.3V note 2 : The output frequency range is 80 MHz to 160MHz with a multiplier of f0 x 8 at 5.0V note 3 : measured value 1041 XC2173 Series 3.3V, f0 x 7 multiplier (note 1) Ta=25℃ PARAMETER SYMBOL Operating Voltage 'H' Level Input Voltage CONDITIONS MIN TYP MAX VDD 2.97 3.3 3.63 VIH 2.4 'L' Level Input Voltage VIL 'H' Level Output Voltage VOH CMOS: VDD=2.97V, IOH=-8mA 'L' Level Output Voltage VOL CMOS: VDD=2.97V, IOL=8mA Consumption Current 1 IDD1 /INH="OPEN", CL=15pF, f=70MHz 9 Consumption Current 2 IDD2 /INH="L", CL=15pF, f=70MHz 1 Input pull up resistance 1 Rup1 /INH="L" 1.0 Input pull up resistance 2 Rup2 /INH=0.7VDD 35 Internal Oscillation Capacitance Cg (note 3) 13 pF Cd (note 3) 13 pF Internal Oscillation Feedback Resistance Rf Output Off Leak Current Ioz /INH="L" PARAMETER SYMBOL CONDITIONS Operating Voltage 'H' Level Input Voltage 0.4 Ｖ 0.4 Ｖ 2.47 0.3 Ｖ mA mA 2.0 4.0 MΩ 70 140 kΩ 1.0 2.0 MΩ 10 µA UNITS Ta=25℃ MIN TYP MAX VDD 4.5 5.0 5.5 VIH 2.4 Ｖ Ｖ 'L' Level Input Voltage VIL 'H' Level Output Voltage VOH CMOS: VDD=4.5V, IOH=-16mA 'L' Level Output Voltage VOL CMOS: VDD=4.5V, IOL=16mA 0.3 Consumption Current 1 IDD1 /INH="OPEN", CL=15pF, f=140MHz 28 Consumption Current 2 IDD2 /INH="L", CL=15pF, f=140MHz 5 Input pull up resistance 1 Rup1 /INH="L" 0.5 1.0 2.0 MΩ Input pull up resistance 2 Rup2 /INH=0.7VDD 25 50 100 kΩ Internal Oscillation Capacitance Cg (note 3) 13 pF Cd (note 3) 13 pF Internal Oscillation Feedback Resistance Rf Output Off Leak Current Ioz /INH="L" note 2 : The output frequency range is 80 MHz to 160MHz with a multiplier of f0 x 7 at 5.0V note 3 : measured value 3.9 100 note 1 : The output frequency range is 70 MHz to 100MHz with a multiplier of f0 x 7 at 3.3V 1042 Ｖ Ｖ 5.0V, f0 x 7 multiplier (note 2) 14 UNITS 0.4 Ｖ 0.4 Ｖ 4.2 240 Ｖ mA mA 400 kΩ 10 µA XC2173 Series 3.3V, f0 x 6 multiplier (note 1) Ta=25℃ PARAMETER SYMBOL Operating Voltage 'H' Level Input Voltage CONDITIONS MIN TYP MAX VDD 2.97 3.3 3.63 VIH 2.4 'L' Level Input Voltage VIL 'H' Level Output Voltage VOH CMOS: VDD=2.97V, IOH=-8mA 'L' Level Output Voltage VOL CMOS: VDD=2.97V, IOL=8mA Consumption Current 1 IDD1 /INH="OPEN", CL=15pF, f=60MHz UNITS Ｖ Ｖ 0.4 2.47 Ｖ Ｖ 0.4 8 Ｖ mA Consumption Current 2 IDD2 /INH="L", CL=15pF, f=60MHz Input pull up resistance 1 Rup1 /INH="L" 1.0 2.0 4.0 MΩ Input pull up resistance 2 Rup2 /INH=0.7VDD 35 70 140 kΩ Internal Oscillation Capacitance Cg (note 3) 13 pF Cd (note 3) 13 pF Internal Oscillation Feedback Resistance Rf Output Off Leak Current Ioz /INH="L" CONDITIONS 1 0.3 1.0 mA 2.0 MΩ 10 µA 5.0V, f0 x 6 multiplier (note 2) Ta=25℃ PARAMETER SYMBOL MIN TYP MAX Operating Voltage VDD 4.5 5.0 5.5 'H' Level Input Voltage VIH 2.4 Ｖ Ｖ 'L' Level Input Voltage VIL 'H' Level Output Voltage VOH CMOS: VDD=4.5V, IOH=-16mA 'L' Level Output Voltage VOL CMOS: VDD=4.5V, IOL=16mA 0.3 3.9 UNITS 0.4 Ｖ 0.4 Ｖ 4.2 Ｖ Consumption Current 1 IDD1 /INH="OPEN", CL=15pF, f=120MHz 23 Consumption Current 2 IDD2 /INH="L", CL=15pF, f=120MHz 5 Input pull up resistance 1 Rup1 /INH="L" 0.5 Input pull up resistance 2 Rup2 /INH=0.7VDD 25 Internal Oscillation Capacitance Cg (note 3) 13 pF Cd (note 3) 13 pF Internal Oscillation Feedback Resistance Rf Output Off Leak Current Ioz 100 /INH="L" mA mA 1.0 2.0 MΩ 50 100 kΩ 240 400 kΩ 10 µA note 1 : The output frequency range is 60 MHz to 100MHz with a multiplier of f0 x 6 at 3.3V note 2 : The output frequency range is 80 MHz to 150MHz with a multiplier of f0 x 6 at 5.0V note 3 : measured value 14 1043 XC2173 Series 3.3V, f0 x 5 multiplier (note 1) Ta=25℃ PARAMETER SYMBOL MIN TYP MAX UNITS Operating Voltage VDD 2.97 3.3 3.63 Ｖ 'H' Level Input Voltage VIH 2.4 'L' Level Input Voltage VIL 0.4 Ｖ 'H' Level Output Voltage VOH CMOS: VDD=2.97V, IOH=-8mA 'L' Level Output Voltage VOL CMOS: VDD=2.97V, IOL=8mA 0.4 Ｖ Consumption Current 1 IDD1 /INH="OPEN", CL=15pF, f=50MHz 7 Consumption Current 2 /INH="L", CL=15pF, f=50MHz 1 Input pull up resistance 1 IDD2 Rup1 /INH="L" 1.0 Input pull up resistance 2 Rup2 /INH=0.7VDD 35 Internal Oscillation Capacitance Cg (note 3) 13 pF Cd (note 3) 13 pF CONDITIONS Internal Oscillation Feedback Resistance Rf Output Off Leak Current Ioz /INH="L" PARAMETER SYMBOL CONDITIONS Operating Voltage 'H' Level Input Voltage Ｖ 2.47 0.3 Ｖ mA mA 2.0 4.0 MΩ 70 140 kΩ 1.0 2.0 MΩ 10 µA UNITS 5.0V, f0 x 5 multiplier (note 2) Ta=25℃ MIN TYP MAX VDD 4.5 5.0 5.5 VIH 2.4 'L' Level Input Voltage VIL 'H' Level Output Voltage VOH CMOS: VDD=4.5V, IOH=-16mA 'L' Level Output Voltage VOL CMOS: VDD=4.5V, IOL=16mA 0.3 Consumption Current 1 IDD1 /INH="OPEN", CL=15pF, f=100MHz 23 0.4 Ｖ Ｖ 0.4 Ｖ mA Consumption Current 2 IDD2 /INH="L", CL=15pF, f=100MHz Rup1 /INH="L" 0.5 1.0 2.0 MΩ Input pull up resistance 2 Rup2 /INH=0.7VDD 25 50 100 kΩ Internal Oscillation Capacitance Cg (note 3) 13 pF Cd (note 3) 13 pF Internal Oscillation Feedback Resistance Rf Output Off Leak Current Ioz note 3 : measured value 5 100 /INH="L" note 2 : The output frequency range is 80 MHz to 125MHz with a multiplier of f0 x 5 at 5.0V 1044 4.2 Input pull up resistance 1 note 1 : The output frequency range is 50 MHz to 100MHz with a multiplier of f0 x 5 at 3.3V 14 3.9 Ｖ Ｖ 240 mA 400 kΩ 10 µA XC2173 Series ■Switching Characteristics 3.3V Ta=25℃ CONDITIONS PARAMETER SYMBOL MIN TYP Output Rise Time tr CL=15pF, 0.1VDD ∼ 0.9VDD (note 1) 2.0 Output Fall Time tf CL=15pF, 0.9VDD ∼ 0.1VDD (note 1) 2.0 Output DUTY Cycle DUTY CMOS: 0.5VDD, CL=15pF Output Disenable (Delay Time) tplz Output Enable (Delay Time) Jitter 45 MAX UNITS ns ns 55 ％ CL=15pF (note 1) 100 ns tpzl CL=15pF (note 1) 100 ns tj 1σ (note 1) 50 ps 5.0V Ta=25℃ PARAMETER SYMBOL CONDITIONS Output Rise Time tr CL=15pF, 0.1VDD ∼ 0.9VDD (note 1) 1.5 Output Fall Time tf CL=15pF, 0.9VDD ∼ 0.1VDD (note 1) 1.5 Output DUTY Cycle DUTY CMOS: 0.5VDD, CL=15pF Output Disenable (Delay Time) tplz Output Enable (Delay Time) Jitter MIN TYP 45 MAX UNITS ns ns 55 ％ CL=15pF (note 1) 100 ns tpzl CL=15pF (note 1) 100 ns tj 1σ (note 1) 50 ps note 1 : measured value 14 1045 XC2173 Series ■Switching Characteristics 1) CMOS Level : tr, tf, Duty 0.9VDD 0.9VDD 0.5VDD DUTY measure level 0.1VDD 0.1VDD ＴＷ Ｑ0 Output tr tf 0.5VDD (CMOS Output) DUTY measure level ＴＷ Ｑ0 Output Ｔ DUTY＝ TW T × 100 (%) 2) Output Disable/Enable Delay Time /INH Input VIH VIL tplz tpzl ( Hi-Z ) Ｑ0 Output *) /INH pin input waveform : tr = tf = less than 10 ns 14 1046