Incremental encoders Micro series - shaft ø5 mm 2...1024 pulses per revolution BRIV 30 - EcoMag Features –– Micro encoder with solid shaft ø5 mm –– Magnetic sensing –– Max. 1024 pulses per revolution –– Housing ø30 mm –– High resistance to shock and vibrations –– Wide pulse number range –– Synchro flange Technical data - mechanical design Voltage supply 5 VDC ±10 % 20...28 VDC Size (flange) ø30 mm Consumption typ. 25 mA (5 VDC, w/o load) 30 mA (24 VDC, w/o load) Shaft type ø5 mm solid shaft Admitted shaft load Pulses per revolution 2...1024 ≤10 N axial ≤10 N radial Reference signal Zero pulse, width 90° Flange Synchro flange Sensing method Magnetic Protection DIN EN 60529 IP 65 Output frequency ≤320 kHz Operating speed ≤6000 rpm Output signals A 90° B, N + inverted Operating torque typ. 0.017 Nm Output stages Antivalent Push-pull short-circuit proof Materials Housing: polyamide black Flange: aluminium Interference immunity DIN EN 61000-6-2 Operating temperature -20...+85 °C -20...+65 °C Emitted interference DIN EN 61000-6-3 Relative humidity 95 % non-condensing Approval UL approval / E217823 Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 100 g, 6 ms Connection Connector M9, 5-pin Connector M9, 8-pin Cable 1 m Weight approx. 90 g 1 www.baumer.com/motion 13/8/2015 Technical data - electrical ratings Subject to modification in technic and design. Errors and omissions excepted. BRIV 30 with shaft Incremental encoders Micro series - shaft ø5 mm 2...1024 pulses per revolution BRIV 30 - EcoMag Part number BRIV 30S Accessories 6 Connectors and cables L5 Connection 4 Cable 1 m, axial 5 Cable 1 m, radial 9 Connector radial Solid shaft L5 ø5 mm, IP 64 Pulse number - see table 10132983 Female connector M9, 8-pin, straight 11094664 Female connector M9, 8-pin, straight, 2 m cable 11094665 Female connector M9, 8-pin, straight, 5 m cable 11094660 Female connector M9, 5-pin, straight, 2 m cable 11094662 Female connector M9, 5-pin, straight, 5 m cable Mounting accessories Voltage supply / signals 05A 5 VDC / antivalent (TTL compatible) 17K 20...28 VDC / push-pull short-circuit proof (only operating temperature -20...+65 °C) 10106004 Clamp set ø10 mm Operating temperature 1 -20...+85 °C 3 -20...+65 °C Pulse number 2 4 8 16 20 32 40 50 64 80 100 128 160 200 250 256 400 500 512 800 1000 1024 Other pulse numbers on request. Complementary Linedriver RS422 Output level High >2,4 V (I = -20 mA) Output level Low <0,4 V (I = 20 mA) Load High <20 mA Load Low <20 mA Outputs 17K Push-pull short-circuit protection Output level High >+Vs -3,7 V (I = -30 mA) Output level Low <2,5 V (I = 30 mA) Load High <30 mA Load Low <30 mA 2 www.baumer.com/motion 13/8/2015 Outputs 05A Subject to modification in technic and design. Errors and omissions excepted. Trigger level Incremental encoders Micro series - shaft ø5 mm 2...1024 pulses per revolution BRIV 30 - EcoMag Terminal assignment Cable for connection reference -4 and -5 05A 17K Connector M9 male for connection reference -9 05A Core colour Signals Core colour Signals Connector Core colour* Signals brown +Vs brown green CHA green +Vs Pin 1 white 0V CHA Pin 2 brown +Vs red CHA compl. – – Pin 3 green CHA yellow CHB yellow CHB Pin 4 yellow CHB blue CHB compl. – – Pin 5 grey CHN compl. pink CHN pink CHN Pin 6 pink CHN grey CHN compl. – – Pin 7 blue CHB compl. 0V Pin 8 red CHA compl. Connector Core colour* Signals Output signals Pin 1 white 0V Counter clockwise rotating direction when looking at the flange. 05A Pin 2 brown +Vs Pin 3 black CHA Pin 4 blue CHB CHA Pin 5 grey CHN CHA comp. *these core colours are valid for the assembled mating connectors (see accessories) white 0V white Cable data 8 x 0.14 mm2 5 x 0.14 mm2 Screen connectedtoflange 17K 4 5 6 CHB 3 8 7 1 2 3 4 2 5 1 90° CHN comp. Counter clockwise rotating direction when looking at the flange. 17K CHA CHB CHN 90° 3 www.baumer.com/motion 13/8/2015 CHN Subject to modification in technic and design. Errors and omissions excepted. CHB comp. Incremental encoders Micro series - shaft ø5 mm 2...1024 pulses per revolution BRIV 30 - EcoMag Dimensions 2,2 2 34 8,4 ø31 23,4 6,5 23 BRIV 30 connector dimensions 23 Subject to modification in technic and design. Errors and omissions excepted. 6,5 4 www.baumer.com/motion 13/8/2015 12 2,2 2 34 ~59 12,2 1,8 ø31 0 0 ø5 -0,018 ø16 -0,018 0 12 2,2 2 34 M3 x 5 3 x 120 ø30,2 0 M3 x 5 3 x 120 1,8 23 BRIV 30, connector output radial ø27 -0,084 0 ø5 -0,018 0 ø31 1,8 12 ø16 -0,018 ø27 -0,084 M3 x 5 3 x 120 ø30,2 0 0 ø5 -0,018 ø16 -0,018 BRIV 30, cable radial ø30,2 0 ø27 -0,084 BRIV 30, cable axial