TE Analog Devices Welcomes Hittite Microwave Corporation O B SO LE NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com TE O B SO LE THIS PAGE INTENTIONALLY LEFT BLANK HMC318MS8G / 318MS8GE v02.0607 Typical Applications Features The HMC318MS8G / HMC318MS8GE is ideal for: LNA with 18 dB Gain Control +3V Operation • UNII Low Noise Figure: 2.5 dB • HiperLAN No External Components Functional Diagram TE Ultra Small 8 Lead MSOP: 14.8mm2 x 1mm High General Description LE The HMC318MS8G & HMC318MS8GE are surface mount low cost C-band variable gain low noise amplifiers (VGLNA) that serve the full UNII and HiperLAN bands. The HMC318MS8G & HMC318MS8GE operate using a single positive supply that can be set between +3V or +5V. When a control voltage of 0V to +3V is applied, the gain of the amplifier will decrease while maintaining excellent return loss performance. A maximum gain of 9 dB is achieved when VCTL is set to 0V and a minimum gain of -9 dB is achieved when Vctl is set to +3V. B SO LOW NOISE AMPLIFIERS - SMT 8 GaAs MMIC LOW NOISE AMPLIFIER with AGC, 5 - 6 GHz O Electrical Specifi cations, TA = +25° C, Vdd = +3V Parameter* Min. Frequency Range Gain 6 11 Noise Figure Input Return Loss Max. 5-6 Gain Variation over Temperature Gain Control Range Typ. GHz 9 12 dB 0.03 0.04 dB/°C 18 23 dB 2.5 4.0 dB 6 12 Output Return Loss 7 13 dB Output Power for 1 dB Compression (P1dB) -1 2 dBm Output Third Order Intercept (OIP3) 10 13 Supply Current (Idd) 6 dB dBm 10 * Specifi cations refer to the maximum gain state (Vctl = 0V) unless otherwise noted. 8 - 14 Units For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com mA HMC318MS8G / 318MS8GE v02.0607 GaAs MMIC LOW NOISE AMPLIFIER with AGC, 5 - 6 GHz 10 10 5 GAIN (dB) 5 0 S11 S21 S22 -5 1.0V 1.4V 0 1.8V TE -5 -10 -20 4.5 5 5.5 6 -15 4.5 6.5 6 6.5 6 6.5 Noise Figure vs. Temperature, Vctl = 0V B SO +25C +85C -40C 5 5.5 6 3 2 +25 C +85 C -40 C 1 0 4.5 6.5 5 Output Return Loss vs. Temperature, Vctl = 0V O Input Return Loss vs. Temperature, Vctl = 0V 0 OUTPUT RETURN LOSS (dB) 0 +25C +85C -40C -5 -10 -15 5 5.5 FREQUENCY (GHz) 5.5 FREQUENCY (GHz) FREQUENCY (GHz) -20 4.5 6.5 4 5 -15 4.5 6 LE 10 -10 5.5 5 15 -5 5 FREQUENCY (GHz) Gain vs. Temperature, Vctl = 0V 0 3.0V -10 FREQUENCY (GHz) GAIN (dB) 0V LOW NOISE AMPLIFIERS - SMT 15 NOISE FIGURE (dB) RESPONSE (dB) 15 -15 INPUT RETURN LOSS (dB) 8 Gain over Control Range Gain & Return Loss @ Vctl = 0V 6 6.5 +25C +85C -40C -5 -10 -15 -20 4.5 5 5.5 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 15 HMC318MS8G / 318MS8GE v02.0607 8 GaAs MMIC LOW NOISE AMPLIFIER with AGC, 5 - 6 GHz Input Return Loss over Control Range Gain vs. Control Voltage @ 5.8 GHz 0 8 Return Loss (dB) -5 Gain (dB) 4 0 -10 Vctl= 3.0V Vctl= 1.8V Vctl= 1.4V Vctl= 0.8V Vctl= 0V TE -4 -15 -8 -12 0.0 0.5 1.0 1.5 2.0 2.5 -20 4.5 3.0 Control Voltage (Vdc) 5 6 6.5 6 6.5 LE Reverse Isolation vs. Temperature, Vctl = 0V Vctl= 3.0V Vctl= 1.8V Vctl= 1.4V Vctl= 0.8V Vctl= 0V -10 -20 4.5 B SO -5 5 5.5 6 6.5 REVERSE ISOLATION (dB) 0 0 -15 O Noise Figure and OIP3 vs. Control Voltage +25C +85C -40C -10 -20 -30 -40 -50 4.5 5 5.5 FREQUENCY (GHz) FREQUENCY (GHz) Absolute Maximum Ratings Frequency = 5.8 GHz VCTL Noise Figure (dB) OIP3 (dBm)* Drain Bias Voltage (Vdd) +7.0 Vdc Control Voltage Range (Vctl) -0.2 to Vdd 0V 2.5 13.0 RF Input Power (RFIN)(Vdd = +3.0 Vdc) 0 dBm 1.4V 4.5 1.2 Channel Temperature 150 °C 3.0V 10.5 -6.7 Continuous Pdiss (T = 85 °C) (derate 9.76 mW/°C above 85 °C) 0.634 W Thermal Resistance (channel to ground paddle) 102 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A *Two-tone input power = -20 dBm per tone. Gain Control 8 - 16 5.5 FREQUENCY (GHz) Output Return Loss over Control Range Return Loss (dB) LOW NOISE AMPLIFIERS - SMT 12 Vctl (Vdc) Gain State Typical Ictl (uA) 0 Maximum 25 Vdd Minimum 25 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC318MS8G / 318MS8GE v02.0607 GaAs MMIC LOW NOISE AMPLIFIER with AGC, 5 - 6 GHz TE LE B SO NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. LOW NOISE AMPLIFIERS - SMT 8 Outline Drawing 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. O Package Information Part Number Package Body Material Lead Finish MSL Rating HMC318MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC318MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H318 XXXX [2] H318 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 17 HMC318MS8G / 318MS8GE v02.0607 Evaluation PCB B SO LE TE LOW NOISE AMPLIFIERS - SMT 8 GaAs MMIC LOW NOISE AMPLIFIER with AGC, 5 - 6 GHz O List of Materials for Evaluation PCB 104085 [1] Item Description J1, J2 PCB Mount SMA Connector J3, J4 DC Pin U1 HMC318MS8G / HMC318MS8GE Amplifier PCB [2] Evaluation PCB 1.6” x 1.5” [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 8 - 18 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC318MS8G / 318MS8GE v02.0607 GaAs MMIC LOW NOISE AMPLIFIER with AGC, 5 - 6 GHz TE LE B SO O LOW NOISE AMPLIFIERS - SMT 8 Notes: For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 19