PDF Data Sheet

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC566LP4E
v02.0609
Amplifiers - Low Noise - SMT
7
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 28 - 36 GHz
Typical Applications
Features
The HMC566LP4E is ideal for:
Low Noise Figure: 2.8 dB
• Point-to-Point Radios
High Gain: 21 dB
• Point-to-Multi-Point Radios & VSAT
High OIP3: +24 dBm
• Test Equipment and Sensors
Single Positive Supply: +3V @ 82 mA
• Military & Space
50 Ohm Matched & DC Blocked I/Os
24 Lead 4x4mm QFN Package: 16mm²
General Description
Functional Diagram
The HMC566LP4E is a high dynamic range GaAs
pHEMT MMIC Low Noise Amplifier (LNA) in a
4x4 mm SMT package which operates from 28 to
36 GHz. The HMC566LP4E provides 21 dB of small
signal gain, 2.8 dB of noise figure and output IP3 of
24 dBm. This self-biased LNA is ideal for hybrid and
MCM assemblies due to its compact size, single
+3V supply operation, and DC blocked RF I/O’s.
The RoHS packaged HMC566LP4E eliminates the
need for wirebonding and allows the use of high
volume surface mount manufacturing techniques.
The HMC566LP4E is also available in chip form as
the HMC566.
Electrical Specifications, TA = +25° C, Vdd 1, 2, 3, 4 = +3V
Parameter
Min.
Frequency Range
Gain
Max.
Min.
18
Typ.
Max.
Min.
31.5 - 33.5
21
19.5
Typ.
Max.
33.5 - 36
22.5
18
GHz
21
dB
0.03
dB/ °C
0.03
Noise Figure
2.8
Input Return Loss
14
18
12
Output Return Loss
8
10
7
dB
Output Power for 1 dB Compression (P1dB)
11
12
11
dBm
Saturated Output Power (Psat)
13
14
13
dBm
Output Third Order Intercept (IP3)
0.03
Units
Gain Variation Over Temperature
Supply Current (Idd1+Idd2+Idd3+Idd4)
7-1
Typ.
28 - 31.5
3.6
2.8
23.5
50
82
3.6
3.3
24.5
106
50
82
4.3
dB
24.5
106
50
82
dB
dBm
106
mA
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC566LP4E
v02.0609
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 28 - 36 GHz
30
20
28
15
26
10
24
S21
S11
S22
5
0
-5
22
20
18
-10
16
-15
14
-20
12
+25 C
+85 C
- 40 C
10
22
24
26
28
30
32
34
36
38
40
26
28
FREQUENCY (GHz)
32
34
36
38
FREQUENCY (GHz)
Input Return Loss vs. Temperature
Output Return Loss vs. Temperature
0
0
RETURN LOSS (dB)
+25 C
+85 C
- 40 C
-5
RETURN LOSS (dB)
30
-10
-15
-20
-5
-10
+25 C
+85 C
- 40 C
-15
-25
-30
Amplifiers - Low Noise - SMT
25
-25
-20
26
28
30
32
34
36
38
26
28
FREQUENCY (GHz)
30
32
34
36
38
FREQUENCY (GHz)
Noise Figure vs. Temperature
Reverse Isolation vs. Temperature
10
0
-10
+25 C
+85 C
-40 C
ISOLATION (dB)
8
NOISE FIGURE (dB)
7
Gain vs. Temperature
GAIN (dB)
RESPONSE (dB)
Broadband Gain & Return Loss
6
4
2
-20
+25 C
+85 C
- 40 C
-30
-40
-50
-60
0
-70
26
28
30
32
34
FREQUENCY (GHz)
36
38
26
28
30
32
34
36
38
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7-2
HMC566LP4E
v02.0609
Psat vs. Temperature
18
18
16
16
14
14
Psat (dBm)
P1dB (dBm)
P1dB vs. Temperature
12
10
8
12
10
8
+25 C
+85 C
- 40 C
6
+25 C
+85 C
- 40 C
6
4
4
26
28
30
32
34
36
38
26
28
30
FREQUENCY (GHz)
36
38
25
Pout (dBm), GAIN (dB), PAE (%)
28
26
24
22
20
+25 C
+85 C
- 40 C
16
14
26
28
30
32
34
36
38
20
Pout
Gain
PAE
15
10
5
0
-20
-18
-16
-14
Gain, Noise Figure & Power vs.
Supply Voltage @ 32 GHz
10
27
9
24
8
7
Gain
P1dB
6
15
5
12
4
9
3
Noise Figure
6
2
3
1
0
0
2.5
3
Vdd (V)
NOISE FIGURE (dB)
18
-10
-8
-6
-4
-2
Absolute Maximum Ratings
30
21
-12
INPUT POWER (dBm)
FREQUENCY (GHz)
GAIN (dB), P1dB (dBm)
34
Power Compression @ 32 GHz
30
18
7-3
32
FREQUENCY (GHz)
Output IP3 vs. Temperature
IP3 (dB)
Amplifiers - Low Noise - SMT
7
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 28 - 36 GHz
Drain Bias Voltage (Vdd1, 2, 3, 4)
+3.5 V
RF Input Power (RFIN)(Vdd = +3 Vdc)
+5 dBm
Channel Temperature
175 °C
Continuous Pdiss (T= 85 °C)
(derate 9.6 mW/°C above 85 °C)
0.8 W
Thermal Resistance
(channel to ground paddle)
104 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
3.5
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC566LP4E
v02.0609
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 28 - 36 GHz
Vdd (V)
Idd (mA)
+2.5
79
+3.0
82
+3.5
85
Note: Amplifier will operate over full voltage ranges shown
above.
Pin Descriptions
Pin Number
Function
Description
1, 2, 4 - 7, 12 - 15,
17 - 19, 24
GND
This pins and exposed ground paddle
must be connected to RF/DC ground.
3
RFIN
This pin is AC coupled
and matched to 50 Ohms.
8 - 11
N/C
No Connection
16
RFOUT
This pin is AC coupled
and matched to 50 Ohms.
23, 22, 21, 20
Vdd1, 2, 3, 4
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF, 10 nF and 4.7 µF are required.
Interface Schematic
Amplifiers - Low Noise - SMT
7
Typical Supply Current vs. Vdd
Application Circuit
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7-4
HMC566LP4E
v02.0609
Outline Drawing
Amplifiers - Low Noise - SMT
7
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 28 - 36 GHz
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC566LP4E
RoHS-compliant Low Stress Injection Molded Plastic
Package Marking [1]
Lead Finish
100% matte Sn
[2]
H566
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
7-5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC566LP4E
v02.0609
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 28 - 36 GHz
7
Amplifiers - Low Noise - SMT
Evaluation PCB
List of Materials for Evaluation PCB 122782
Item
Description
J1 - J5
DC Pin
J6 - J7
PCB Mount K Connector
C1 - C4
100 pF Capacitor, 0402 Pkg.
C5 - C8
10 nF Capacitor, 0603 Pkg.
C9 - C12
4.7 µF Capacitor, Tantalum
U1
HMC566LP4E
PCB [2]
122780 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR
[1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and package bottom should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7-6