TSOP98200 Product Sheet

TSOP 9820 0
FEATURES
•Covers the entire Remote Control bandwidth of 30 kHz to 455 kHz
• Features a photodiode combined with a wide-band amplifier in a single device,
replacing up to 12 discrete components in a typical application
• Mounted within a 3-pin epoxy-encapsulated module with an integrated semicylindrical lens
• AC coupled to prevent sensor activation by DC light sources such as sunlight or
tungsten bulbs
• Internal metal shielding to guard against EMI
•Extended code learning range up to 1 meter - other solutions typically have a
range limited to several centimeters.
• Specified for operation with supply voltages from 2.7 to 5.5 V
• Small package simplifies the design and layout of compact IR extender and code
learning systems
•TTL- and CMOS-compatible output
Applications
• For any code learning and IR extender remote control application
w w w. v i s h a y. c o m
Datasheet is available on our web site at www.vishay.com
for TSOP98200 - http://www.vishay.com/doc?84795
Product Sheet
Industry-First Wide-Band IR Detector for
Code Learning and IR Extender Applications
in Single Package
Op t o e l e c t r o n i c s
infrared detector module
TSOP98200
Vishay Semiconductors
description
The TSOP98200 is a miniaturized detector module for receiving the modulated signal of infrared remote control systems. A
PIN diode and preampliifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated
output signal, Carrier Out, can be used for code learning applications.
Electrical and Optical Characteristics Carrier Out
Tamb = 25 ˚C, unless otherwise specified
Vs = 3 V
Parameter
Test Condition
Symbol
Supply Current (Pin 3)
Ev = 0
ISD
Supply Voltage
VS
Output Voltage Low (Pin 1)
IOSL = 0.5 mA,
test signal see fig.1
VOSL
Maximum Irradiance
test signal see fig.1
(20 - 60* kHz)
Ee max
Directivity
Angle of half transmission
distance
Transmission Distance
Min
Typ.
Max
Unit
0.6
0.8
mA
5.5
V
250
mV
2.7
500
W/m2
j1/2
± 45
deg
Ev= 0, test signal see fig. 1,
IR diode TSAL6200,
IF= 400 mA
d
1
m
Threshold Irradiance
VS= 3 V
(20 - 60* kHz)
Ee min
0.3
Carrier Out rise time
VS= 3 V, CL = 10 pF
TR
100
Carrier Out fall time
VS= 3 V, CL = 10 pF
TF
Output pulse width
TPI= 10 µs, CL = 10 pF
TPO
300
W/m2
0.5
ns
10
0.6
1.1
ns
1.6
µs
*These irradiance values are guaranteed to 60 kHz. The TSOP98200 will continue to function up to frequencies higher than 600 kHz,
however the irradiance at frequencies above 60 kHz is dependent on the carrier frequency and the pulse pattern received.
Typical Eemin = 2 W/m2 at 455 kHz.
Figure 1. Typical Characteristics
Ee
Figure 2. Block Diagram
Optical Test Signal
IR emitting diode TSAL6200, IF = 0.4 A, f = 38 kHz
3 Vs
1 Carrier Out
t
note: Output signal switches on
the falling edge of input signal
VOC
19703
TIA
AMP
Signal Shpaing
2 Gnd
tdC
Output Signal
tpoc
t
For technical questions, contact [email protected]
VMN-PT0048-0702