Obsolete - Replaced by New TSMP58000 (#82485) TSOP98260 www.vishay.com Vishay Semiconductors IR Sensor Module for Remote Control Systems FEATURES • Photo detector and preamplifier in one package • AC coupled response from 20 kHz to 60 kHz, all data formats • Improved shielding against electrical field disturbance • TTL and CMOS compatibility • Output active low 19026 • Supply voltage: 2.7 V to 5.5 V • Carrier out signal for code learning functions • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Pinning: DESCRIPTION 1 = Carrier OUT, 2 = GND, 3 = VS The TSOP98260 is a miniaturized sensor for receiving the modulated signal of infrared remote control systems. A PIN diode and preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for code learning applications. This component has not been qualified according to automotive specifications. PARTS TABLE CARRIER FREQUENCY CODE LEARNING APPLICATIONS 20 kHz to 60 kHz TSOP98260 BLOCK DIAGRAM APPLICATION CIRCUIT 19750 3 VS Circuit Transmitter TSOPxxxx with TSALxxxx 1 Carrier out TIA Amp Signal shaping R 1 = 100 Ω VS OUT GND 2 GND C1 = 4.7 µF + VS µC VO GND R1 + C1 recommended to suppress power supply disturbances. 19746 Rev. 1.4, 28-Mar-12 1 Document Number: 81665 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Obsolete - Replaced by New TSMP58000 (#82485) TSOP98260 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER SYMBOL VALUE UNIT Supply voltage (pin 3) TEST CONDITION VS - 0.3 to + 5.5 V Output voltage (pin 1) VO - 0.3 to (VS + 0.3) V Output current (pin 1) IO 10 mA Tj 100 °C Storage temperature range Junction temperature Tstg - 25 to + 85 °C Operating temperature range Tamb - 25 to + 85 °C Tsd 260 °C t ≤ 10 s, 1 mm from case Soldering temperature ELECTRICAL AND OPTICAL CHARACTERISTICS CARRIER OUT (Tamb = 25 °C, unless otherwise specified, VS = 3 V) PARAMETER TEST CONDITION SYMBOL Ev = 0 ISD Supply current (pin 3) Supply voltage MIN. Transmission distance d IOSL = 0.5 mA, test signal see fig. 1 VOSL Minimum irradiance VS = 3 V, (20 kHz to 60 kHz) Ee min. Maximum irradiance test signal see fig. 1, (20 kHz to 60 kHz) Ee max. Output voltage low (pin 1) MAX. UNIT 0.6 0.8 mA 5.5 V 2.7 VS Ev = 0, test signal see fig. 1, IR diode TSAL6200, IF = 400 mA TYP. 1 0.3 300 m 250 mV 0.5 W/m2 500 W/m2 Angle of half transmission distance ϕ1/2 ± 45 deg Carrier Out rise time VS = 3 V, CL = 10 pF TR 100 ns Carrier Out fall time VS = 3 V, CL = 10 pF TF 10 Output pulse width TPI = 10 μs, CL = 10 pF TPO Directivity 5 7 ns 10 μs TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) t note: Output signal switches on the falling edge of input signal VOC tdC Output signal tpoc 19703 tdc, tpoc - Output Pulse Length (µs) Ee 8 Optical test signal IR emitting diode TSAL6200, IF = 0.4 A, f = 38 kHz 7 6 4 optical test signal , fig. 1 3 2 1 0 t 0.1 21490 Fig. 1 - Carrier Output Pulse Diagram Rev. 1.4, 28-Mar-12 Delay time - tdc Output pulse width - tpoc 5 1 10 100 1000 Ee - Irradiance (W/m²) Fig. 2 - Carrier Output Function Diagram 2 Document Number: 81665 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Obsolete - Replaced by New TSMP58000 (#82485) TSOP98260 S (λ)rel - Relative Spectral Sensitivity www.vishay.com Vishay Semiconductors 1.2 1.0 0.8 0.6 0.4 0.2 0 750 850 950 1150 1050 λ - Wavelength (nm) 94 8408 Fig. 3 - Relative Spectral Sensitivity vs. Wavelength 0° 10° 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 0.6 19258 0.4 0.2 0 drel - Relative Transmission Distance Fig. 4 - Horizontal Directivity 0° 10° 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 0.6 19259 0.4 0.2 0 d rel - Relative Transmission Distance Fig. 5 - Vertical Directivity Rev. 1.4, 28-Mar-12 3 Document Number: 81665 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Obsolete - Replaced by New TSMP58000 (#82485) TSOP98260 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 5 4.8 (4) 2.8 (5.55) 6.95 ± 0.3 8.25 ± 0.3 R2 0.9 1.1 30.5 ± 0.5 (1.54) 0.85 max. 0.7 max. 2.54 nom. 2.54 nom. 0.5 max. 1.2 ± 0.2 Marking area technical drawings according to DIN specifications Not indicated to lerances ± 0.2 Drawing-No.: 6.550-5263.01-4 Issue: 12; 16.04.10 19009 Rev. 1.4, 28-Mar-12 R2 4 Document Number: 81665 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000