V12P10 www.vishay.com Vishay General Semiconductor High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.43 V at IF = 5 A TMBS® eSMP® Series FEATURES • Very low profile - typical height of 1.1 mm • Ideal for automatic placement K • Trench MOS Schottky technology • Low forward voltage drop, low power losses 1 • Meets MSL level 1, per LF maximum peak of 260 °C 2 K Anode 1 Anode 2 J-STD-020, • AEC-Q101 qualified available - Automotive ordering code; base P/NHM3 TO-277A (SMPC) Cathode • High efficiency operation • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 12 A VRRM 100 V IFSM 200 A EAS 100 mJ VF at IF = 12 A 0.58 V TJ max. 150 °C Package TO-277A (SMPC) Diode variations Single die TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, DC/DC converters and polarity protection applications. Case: TO-277A (SMPC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B,.....) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code V12P10 UNIT V1210 Maximum repetitive peak reverse voltage VRRM 100 V Maximum average forward rectified current (fig. 1) IF(AV) 12 A Peak forward surge current 10 ms single half sine-wave superimposed on rated load IFSM 200 A Non-repetitive avalanche energy at IAS = 2.0 A, TJ = 25 °C EAS 100 mJ Peak repetitive reverse current at tp = 2 μs, 1 kHz, TJ = 38 °C ± 2 °C IRRM 1.0 A TJ, TSTG -40 to +150 °C Operating junction and storage temperature range Revision: 16-Dec-14 Document Number: 88981 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V12P10 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Breakdown voltage IR = 1.0 mA IF = 5 A TYP. MAX. VBR 100 (minimum) - TA = 25 °C IF = 12 A Instantaneous forward voltage SYMBOL TA = 25 °C VF (1) IF = 5 A TA = 125 °C IF = 12 A TA = 25 °C VR = 70 V TA = 125 °C Reverse current IR (2) TA = 25 °C VR = 100 V TA = 125 °C UNIT 0.50 - 0.65 0.70 0.43 - 0.58 0.64 7.0 - μA V 4.4 - mA 21.3 250 μA 11.8 20 mA Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise specified) PARAMETER SYMBOL RJA Typical thermal resistance V12P10 (1) 60 RJL 3 UNIT °C/W Note (1) Units mounted on recommended PCB 1 oz. pad layout ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE V12P10-M3/86A 0.10 86A 1500 7" diameter plastic tape and reel V12P10-M3/87A 0.10 87A 6500 13" diameter plastic tape and reel V12P10HM3/86A (1) 0.10 86A 1500 7" diameter plastic tape and reel V12P10HM3/87A (1) 0.10 87A 6500 13" diameter plastic tape and reel V12P10HM3_A/H (1) 0.10 H 1500 7" diameter plastic tape and reel V12P10HM3_A/I (1) 0.10 I 6500 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified Revision: 16-Dec-14 Document Number: 88981 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V12P10 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 100 Instantaneous Reverse Current (mA) Average Forward Rectified Current (A) 14 Resistive or Inductive Load 12 10 8 6 TL measured at the Cathode Band Terminal 4 2 TA = 150 °C 10 TA = 125 °C TA = 100 °C 1 0.1 0.01 TA = 25 °C 0.001 0 100 110 120 130 140 10 150 40 50 60 70 80 90 100 10 000 10 D = 0.3 D = 0.5 D = 0.8 9 Junction Capacitance (pF) D = 0.2 Average Power Loss (W) 30 Fig. 4 - Typical Reverse Leakage Characteristics Fig. 1 - Maximum Forward Current Derating Curve 8 7 D = 0.1 D = 1.0 6 5 4 T 3 2 D = tp/T 1 1000 tp 0 100 0 2 4 6 8 10 12 14 0.1 1 10 100 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Junction Capacitance 100 Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) 20 Percent of Rated Peak Reverse Voltage (%) Lead Temperature (°C) TA = 150 °C 10 TA = 125 °C 1 TA = 25 °C 0.1 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 Junction to Ambient 10 1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Revision: 16-Dec-14 Document Number: 88981 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V12P10 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-277A (SMPC) 0.187 (4.75) 0.175 (4.45) 0.016 (0.40) 0.006 (0.15) K 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 2 1 0.047 (1.20) 0.039 (1.00) 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) Mounting Pad Layout 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.186 (4.72) MIN. 0.268 (6.80) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.049 (1.24) 0.037 (0.94) 0.050 (1.27) MIN. 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) 0.041 (1.04) 0.055 (1.40) MIN. Conform to JEDEC® TO-277A Revision: 16-Dec-14 Document Number: 88981 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000