View Datasheet

05192
ULL0402FC05C
Only One Name Means ProTek’Tion™
LOW CAPACITANCE unbumped flip chip tvs array
Description
The ULLC0402FC05C Flip Chip employs advanced silicon P/N junction technology for unmatched board-level transient voltage protection against Electrostatic Discharge (ESD) and Electrical Fast Transients (EFT). Developed specifically for high-density circuit protection, this series meets the IEC 61000-4-2 and 61000-4-4 requirements. These devices are ideally suited for handheld devices, PCMCIA and SMART cards.
This low capacitance device provides ESD protection greater than 25 kilovolts with a peak pulse power dissipation of 200 Watts per line for an 8/20µs waveform. In
addition, the ULLC0402FC05C features superior clamping performance, low leakage current characteristics and a response time of less than a nanosecond. Their low
inductance virtually eliminates overshoot voltage due to package inductance.
Features
applications
• Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV
• Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns
• ESD Protection > 25 kilovolts
• Low ESD Overshoot Voltage
• Bidirectional and Monolithic Structure
• Protection for 1 Line
• Low Capacitance: 6pF
• Low Leakage Current
• RoHS Compliant
• REACH Compliant
• SMART Phones
• Portable Electronics
• SMART Cards
Mechanical characteristics
• Standard EIA Chip Size: 0402
• Approximate Weight: 0.73 milligrams
• Lead-Free Plating
• Flammability Rating UL 94V-0
• 8mm Plastic Tape per EIA Standard 481
PIN CONFIGURATION
05192.R7 10/12
Page 1
www.protekdevices.com
05192
ULL0402FC05C
Only One Name Means ProTek’Tion™
typical device characteristics
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
Operating Temperature
Storage Temperature
SYMBOL
VALUE
UNITS
TA
-55 to 150
°C
TSTG
-55 to 150
°C
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
(Note 1)
ULLC0402FC05C
RATED
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
MAXIMUM
LEAKAGE
CURRENT
TYPICAL
CAPACITANCE
V WM
VOLTS
@ 1mA
V(BR)
VOLTS
@V WM
ID
µA
@0V, 1MHz
C
pF
5.0
6.0
1.0
6
notes
1. Device is bidirectional.
05192.R7 10/12
Page 2
www.protekdevices.com
05192
ULL0402FC05C
Only One Name Means ProTek’Tion™
typical device characteristics
figure 1
overshoot & clamping voltage
5 Volts per Division
35
25
15
5
-5
ESD Test Pulse - 25 kilovolt, 1/30ns (Waveshape)
figure 2
capacitance vs reverse voltage
Cj - Capactiance - pF
8
4
0
0
05192.R7 10/12
2
4
VR - Reverse Voltage - Volts
Page 3
6
www.protekdevices.com
05192
ULL0402FC05C
Only One Name Means ProTek’Tion™
SOLDER REFLOW INFORMATION
printed circuit board recommendations
parameter
value
Pad Size on PCB
0.275mm
Pad Shape
Round
Pad Definition
Non-Solder Mask Defined Pads
Solder Mask Opening
0.325mm Round
Solder Stencil Thickness
0.150mm
Solder Stencil Aperture Opening (Laser cut, 5% tapered walls)
0.330mm Round
Solder Paste Type
No Clean
Pad Protective Finish
OSP (Entek Cu Plus 106A)
Tolerance - Edge To Corner Ball
±50µm
Solder Ball Side Coplanarity (Only applies to bumped devices)
±20µm
Maximum Dwell Time Above Liquidous (183°C)
60 seconds
Soldering Maximum Temperature
270°C
Requirements
recommended non-solder mask
defined pad illustration
Temperature:
TP for Lead-Free (Sn/Ag/Cu): 260-270°C
Preheat time and temperature depends on solder paste and flux activation temperature, component size, weight, surface area and plating.
Non-Solder Mask Defined Pad
0.275mm DIA.
Solder Mask Opening
0.325mm DIA.
Solder Stencil Opening
0.330mm DIA.
Maximum Solder Reflow
(35-53°C Above Maximum Solder Melt Temp)
TP
Solder Melt
(Maximum Temp)
Temperature - °C
Ramp-Up
Ramp-Down
Preheat
(Stay Below Flux Activation Temp)
30-60 seconds
05192.R7 10/12
Ramp-Up
15 seconds
(Minimize)
Page 4
Solder-Time
15-20 seconds
Ramp-Down
www.protekdevices.com
05192
ULL0402FC05C
Only One Name Means ProTek’Tion™
U0402 package information
outline dimensions
millimeters
min
A
inches
min
max
0.61
B
C
max
0.024
0.86
0.98
0.034
1.02
0.038
D
0.10
0.004
E
0.35
0.014
F
0.458
I
0.508
0.018
0.406
TOP
0.040
A
SIDE
dim
B C
0.020
0.016
Notes
1. Controlling dimensions in inches.
2. Decimal tolerance: .xxx ± 0.05mm (0.002”).
3. Maximum chip size: 1.02mm (0.040”) by 0.51mm (0.020”).
D
E
F
Metalized Die Contacts
END
C
B
layout dimensions
inches
nominal
nominal
A
0.23
0.009
B
0.48
0.019
C
0.69
0.027
D
0.46
0.018
E
0.99
0.039
F
0.20
0.008
G
0.20
0.008
H
0.66
0.026
I
0.13
0.005
D
A
SOLDER PAD
millimeters
dim
I
DIE
DIE
CONTACTS
F
E
H
I
Notes
1. Controlling dimensions in inches.
2. Decimal tolerance: .xxx ± 0.05mm (0.002”).
05192.R7 10/12
SOLDER PRINT
DIAMETER 0.010” - 0.012”
Page 5
G
www.protekdevices.com
05192
ULL0402FC05C
Only One Name Means ProTek’Tion™
TAPE AND REEL information
P0
D
T
10 Pitches Cumulative
Tolerance on tape ± 0.2
E
P2
Top Cover
Tape
F
A0
K0
W
B0
P
User Direction of Feed
specifications
Reel Dia.
Tape
Width
178(7”)
8
A0
B0
K0
D
E
F
P0
P2
P
tmax
0.70 ± 0.05 1.15 ± 0.10 0.56 ± 0.05 1.55 ± 0.05 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.20 4.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05
Notes
1.
2.
3.
4.
5.
6.
W
0.25
tape & reel orientation
Dimensions in millimeters.
Top view of tape. Metal contacts are face down in tape package.
Orientation: preferred stencil - 0.1mm (0.004”).
Surface mount product is taped and reeled in accordance with EIA 481.
8mm plastic tape: 7” Reels - 5,000 (pocket under hole skipped) pieces per reel.
Marking on Reel - part number, date code and lot number.
Single Die - 0402
Package outline, pad layout and tape specifications per document number 06020.R6 8/12.
ORDERING INFORMATION
base PART NUMBER
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE qty
ULLC0402FC05C
-n/a
-T75-1
5,000
7”
n/a
This device is only available in a Lead-Free configuration.
05192.R7 10/12
Page 6
www.protekdevices.com
05192
ULL0402FC05C
Only One Name Means ProTek’Tion™
company information
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products.
These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses
(NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog
switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Marketing: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By E-mail:
Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
ProTek Devices (Asia Pacific) Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
PATENT INFORMATION: This device is patented under U.S. Patent No. Des. “6,867,436”.
05192.R7 10/12
Page 7
www.protekdevices.com