05192 ULLC0402FC3.3C* thru Only One Name Means ProTek’Tion™ ULLC0402FC24C* UNBUMPED LOW CAPACITANCE FLIP CHIP ARRAY APPLICATIONS ✔ Cellular Phones ✔ Personal Digital Assistant (PDA) ✔ Notebook Computers ✔ SMART Cards IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns U0402 FEATURES ✔ ESD Protection > 25 kilovolts ✔ Available in Six Voltage Types Ranging From 3.3V to 24V ✔ Low ESD Overshoot Voltage ✔ Bidirectional Configuration & Monolithic Structure ✔ Protects 1 Line ✔ LOW CAPACITANCE: 6pF ✔ LOW LEAKAGE CURRENT MECHANICAL CHARACTERISTICS ✔ Standard EIA Chip Size: 0402 ✔ Weight 0.73 milligrams (Approximate) ✔ Flammability Rating UL 94V-0 ✔ 8mm Plastic & Paper Tape and Reel Per EIA Standard 481 ✔ Device Marking On Reel PIN CONFIGURATION *PATENT PENDING 05192.R0 8/03 1 www.protekdevices.com ULLC0402FC3.3C* thru ULLC0402FC24C* DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature SYMBOL TJ VALUE -55°C to 150°C UNITS °C TSTG -55°C to 150°C °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Note 1) ULLC0402FC3.3C ULLC0402FC05C ULLC0402FC08C ULLC0402FC12C ULLC0402FC15C ULLC0402FC24C RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE VWM VOLTS @ 1mA V(BR) VOLTS @VWM ID µA @0V, 1 MHz C pF 3.3 5.0 8.0 12.0 15.0 24.0 4.0 6.0 8.5 13.3 16.7 26.7 75 1.0 0.1 0.1 0.1 0.1 6 6 6 6 6 6 Note 1: All devices are bidirectional. FIGURE 1 REFLOW SOLDER PROFILE 225°C 5-10 sec 200°C Instantaneous to 200°C 1-2 Minutes to 150°C 1-2 Minutes to 25°C 100°C Pre-Heat Time Soldering Time Cool Down Time Note: This reflow profile does not take into account the printed circuit board (PCB) material heating time. Additional time may be required for the preheat time and cool down time upon the PCB or board material. *PATENT PENDING 05192.R0 8/03 2 www.protekdevices.com ULLC0402FC3.3C* thru ULLC0402FC24C* GRAPHS FIGURE 2 OVERSHOOT & CLAMPING VOLTAGE FOR ULLC0402FC05C 35 5 Volts per Division 25 15 5 -5 ESD Test Pulse - 25 kilovolt, 1/30ns (waveshape) FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE FOR ULLC0402FC05C 10 Cj - Capacitance - pF 8 6 4 2 0 0 1 2 3 4 5 6 VR - Reverse Voltage - Volts *PATENT PENDING 05192.R0 8/03 3 www.protekdevices.com ULLC0402FC3.3C* thru ULLC0402FC24C* PACKAGE OUTLINE & DIMENSIONS U0402 SIDE B TOP C A PACKAGE OUTLINE PACKAGE DIMENSIONS D E F Metalized Die Contacts END DIM MILLIMETERS INCHES A B C D E F I 0.46 NOM 0.86 NOM 0.99 ± 0.0254 0.10 NOM 0.35 NOM 0.483 ± 0.0254 0.406 NOM 0.018 NOM 0.034 NOM 0.039 ± 0.001 0.004 NOM 0.014 NOM 0.019 ± 0.001 0.016 NOM NOTES: 1. Controlling dimensions in inches. 2. Decimal tolerances for mounting pad and outline: .xxx ± 0.05mm (± 0.002”). 3. Maximum chip size: 1.02 (0.040”) by 0.51(0.020”). I MOUNTING PAD PAD DIMENSIONS C D B SOLDER PAD A F E H DIE DIE CONTACTS MILLIMETERS INCHES A B C D E F G H I 0.23 0.48 0.69 0.46 0.99 0.20 0.20 0.66 0.13 0.009 0.019 0.027 0.018 0.039 0.008 0.008 0.026 0.005 NOTE: 1. Top view of tape. Metal contacts are face down in tape package. TAPE & REEL ORIENTATION G I SOLDER PRINT DIAMETER 0.010” 0.012” DIM Single Die - 0402 TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. 8mm Plastic Tape: 7 Inch Reels - 5,000 pieces per reel. Ordering Suffix: -T75-1 (i.e., ULLC0402FC05C-T75-1). 3. 8mm Paper Tape: 7 Inch Reels -10,000 pieces per reel. Ordering Suffix: -T710-2 (i.e., ULLC0402FC05C-T710-2). NOTE: 1. Preferred: Using 0.1mm (0.004”) stencil. Outline & Dimensions: Rev 3 - 11/02, 06020 COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com *PATENT PENDING 05192.R0 8/03 4 www.protekdevices.com