DATASHEET 16V SMALL CELL MODULE FEATURES AND BENEFITS* TYPICAL APPLICATIONS 16V DC working voltage Resistive cell balancing Compact, light weight package Screw terminals Wind turbine pitch control Small UPS systems PRODUCT SPECIFICATIONS ELECTRICAL BMOD0058 E016 B02 Rated Capacitance1 58 F 1 Minimum Capacitance, initial 58 F Maximum Capacitance, initial 70 F Maximum ESR DC, initial 1 22 mΩ 1 Test Current for Capacitance and ESRDC 35 A 1 Rated Voltage Absolute Maximum Voltage 16 V 17 V 2 Absolute Maximum Current 170 A Leakage Current at 25°C, maximum3 25 mA Maximum Series Voltage 750 V Capacitance of Individual Cells 350 F 9 Maximum Stored Energy, Individual Cell 0.35 Wh 9 Number of Cells 6 TEMPERATURE Operating Temperature (Cell Case Temperature) Minimum -40oC Maximum 65oC Storage Temperature (Stored Uncharged) Minimum -40oC Maximum 70oC *Results may vary. Additional terms and conditions, including the limited warranty, apply at the time of purchase. See the warranty details for applicable operating and use requirements. Page 1 Document number: 1015371.6 maxwell.com DATASHEET 16V SMALL CELL MODULE PRODUCT SPECIFICATIONS (Cont’d) PHYSICAL BMOD0058 E016 B02 Mass, typical 0.63 kg Power Terminals M5 Thread Recommended Torque - Terminal 4 Nm Vibration Specification IEC60068-2-6 Shock Specification IEC60068-2-27, -29 Environmental Protection IP54 Cooling Natural Convection MONITORING / CELL VOLTAGE MANAGEMENT Internal Temperature Sensor N/A Temperature Interface N/A Cell Voltage Monitoring N/A Connector N/A Cell Voltage Management Passive POWER & ENERGY Usable Specific Power, Pd4 Impedance Match Specific Power, Pmax Specific Energy, Emax 2,200 W/kg 4,600 W/kg 5 3.3 Wh/kg 6 Stored Energy, Estored 2.1 Wh 7,9 SAFETY Short Circuit Current, typical 730 A (Current possible with short circuit from rated voltage. Do not use as an operating current.) Certifications High-Pot Capability Page 2 RoHS, UL810a (640 Volts) 5,600 VDC 10 Document number: 1015371.6 maxwell.com DATASHEET 16V SMALL CELL MODULE TYPICAL CHARACTERISTICS THERMAL CHARACTERISTICS BMOD0058 E016 B02 Thermal Resistance (Rca, All Cell Cases to Ambient), typical 4.8oC/W 8 Thermal Capacitance (Cth), typical 420 J/oC Maximum Continuous Current (ΔT = 15oC)8 12 ARMS Maximum Continuous Current (ΔT = 40 C) 19 ARMS o 8 LIFE DC Life at High Temperature1 1,500 hours (held continuously at Rated Voltage and Maximum Operating Temperature) Capacitance Change 20% ESR Change 100% (% decrease from minimum initial value) (% increase from maximum initial value) Projected DC Life at 25°C1 10 years (held continuously at Rated Voltage) Capacitance Change 20% ESR Change 100% (% decrease from minimum initial value) (% increase from maximum initial value) Shelf Life 4 years (Stored uncharged at 25°C) ESR AND CAPACITANCE VS TEMPERATURE 180% Capacitance DC ESR Percentage change from value at 25°C 170% 160% 150% 140% 130% 120% 110% 100% 90% 80% -60 -40 -20 0 20 40 60 Temperature (°C) Page 3 Document number: 1015371.6 maxwell.com 80 DATASHEET 16V SMALL CELL MODULE NOTES 1. Capacitance and ESRDC measured at 25°C using specified test current per waveform below. 2. Absolute maximum voltage, non-repeated. Not to exceed 1 second. 3. After 72 hours at rated voltage. Initial leakage current can be higher. 4. Per IEC 62391-2, Pd = 0.12V2 ESRDC x mass 5. Pmax = V2 4 x ESRDC x mass 6. Emax = ½ CV2 3,600 x mass 7. Estored = 9. Per United Nations material classification UN3499, all Maxwell ultracapacitors have less than 10 Wh capacity to meet the requirements of Special Provisions 361. Both individual ultracapacitors and modules composed of those ultracapacitors shipped by Maxwell can be transported without being treated as dangerous goods (hazardous materials) under transportation regulations. 10. Duration = 60 seconds. Not intended as an operating parameter. ½ CV2 3,600 MOUNTING RECOMMENDATIONS Recommended mounting screw M4. Maximum torque on mounting screws 4 Nm. All 6 mounting locations must be utilized to meet vibration specifications. Page 4 8. ∆T=IRMS2 x ESR x Rca Document number: 1015371.6 maxwell.com MARKINGS Products are marked with the following information: Rated capacitance, rated voltage, product number, name of manufacturer, positive and negative terminal, and serial number. s DATASHEET 3 16V SMALL CELL MODULE 4 5 6 7 8 A BMOD0058 E016 B02 B 12.2 31 36 4.5 76 H C W 66.4 54.8 34 49 max. Terminal screws: M5 66.4 44.3 38.8 D 226Lmax. Part Description Dimensions (mm) W (±0.5m) L (±0.5mm) BMOD0058 E016 B02 CQ 1 TEB 226.5 SBE 1 EPM Modif. Date 01 - 1 for Customers Quantity H (±0.5mm)OnlyPackage 49.5 General tolerances ISO 2768 mK, EN ISO 13920 1 - 76.0 10 Object Rte de Montena 65 CH-1728 Rossens Switzerland Product dimensions are for reference only unless otherwise 02 identified. Product dimensions and specifications may change without notice. BMOD0058 03 Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by the following 04 Delivery condition: Cleaned and degreased part Depart. Visa DATE 7352558, Modif.: 8072734, Sheet U.S. patents and their respective foreign counterparts: 6643119, 7295423, 7342770, 7384433, 7492571, 7508651,Drawing 7791860, 7791861, 7883553, 7935155, Material ref. Weight [Kg] Disposal to third persons or reproduction even in part, 1/1 GiL 16.11.09 prohibited without writen authority from the compagny. Drawn Design 8279580, and patents pending. 630 g BMOD0058 E016 B02 Customer Drawing 00 3 Maxwell Technologies, Inc. Global Headquarters 3888 Calle Fortunada San Diego, CA 92123 USA Tel: +1 858 503 3300 Fax: +1 858 503 3301 4 Maxwell Technologies SA Route de Montena 65 CH-1 728 Rossens Switzerland Tel: +41 (0)26 411 85 00 Fax: +41 (0)26 411 85 05 Checked EPM xx.xx.xx Approuv. SBE xx.xx.xx SolidWorks / All dimensions in [mm] Maxwell Technologies, GmbH Leopoldstrasse 244 80807 München Germany Tel: +49 (0)89 / 4161403 0 Fax: +49 (0)89 / 4161403 99 Document number: 1015371.6 maxwell.com 1:2 Maxwell Technologies, Inc. Shanghai Trading Co. Ltd. Unit A2,C 12th Floor Huarun Times Square 500 Zhangyang Road, Pudong New Area Shanghai 200122, P.R. China Phone: +86 21 3852 4000 Fax: +86 21 3852 4099 MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGY’S FUTURE, BOOSTCAP, C CELL, D CELL and their respective designs and/or logos are either trademarks or registered trademarks of Maxwell Technologies, Inc. and may not be copied, imitated or used, in whole or in part, without the prior written permission Maxwell Technologies, Inc. All contents copyright © 2014 Maxwell Technologies, Inc. All rights reserved. No portion of these materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc. Page 5 Echelle: Sheet format: A3 Maxwell Technologies Korea Co., Ltd. Room 1524, D-Cube City Office Tower, 15F #662 Gyeongin-Ro, Guro-Gu, Seoul, 152-706 South Korea Phone: +82 10 4518 9829