DATASHEET 56V MODULE FEATURES AND BENEFITS* TYPICAL APPLICATIONS Up to 14 year DC life 56V DC working voltage Resistive cell balancing Overvoltage outputs High power density 4U, half-rack package UL registered UPS systems PRODUCT SPECIFICATIONS ELECTRICAL Rated Capacitance BMOD0130 P056 B03 130 F 1 1 Minimum Capacitance, initial 130 F Maximum Capacitance, initial 156 F Maximum ESR DC, initial 1 8.1 mΩ 1 Test Current for Capacitance and ESRDC 100 A 1 Rated Voltage 56 V Absolute Maximum Voltage2 62 V Absolute Maximum Current 1,900 A Leakage Current at 25°C, maximum 120 mA 3 Maximum Series Voltage 750 V Capacitance of Individual Cells Stored Energy, Individual Cell 3,000 F 9 3.0 Wh 9 Number of Cells 23 TEMPERATURE Operating Temperature (Cell case temperature) Minimum -40oC Maximum 40oC Storage Temperature (Stored uncharged) Minimum -40oC Maximum 70oC *Results may vary. Additional terms and conditions, including the limited warranty, apply at the time of purchase. See the warranty details and enclosed information for applicable operating and use requirements. Page 1 Document number: 1017119.3 maxwell.com DATASHEET 56V MODULE PRODUCT SPECIFICATIONS (Cont’d) PHYSICAL BMOD0130 P056 B03 Mass, typical 18 kg Power Terminals M8/M10 Recommended Torque - Terminal 20/30 Nm Vibration Specification Telcordia GR-63-CORE Zone 4 Shock Specification N/A Environmental Protection IP30 Cooling Natural Convection MONITORING / CELL VOLTAGE MANAGEMENT Internal Temperature Sensor N/A Temperature Interface N/A Cell Voltage Monitoring Overvoltage Alarm Connector Deutsch DTM Cell Voltage Management Passive POWER & ENERGY Usable Specific Power, Pd4 Impedance Match Specific Power, Pmax 2,600 W/kg 5,400 W/kg 5 Specific Energy, Emax6 Stored Energy 3.1 Wh/kg 57 Wh 7 SAFETY Short Circuit Current, typical 6,900 A (Current possible with short circuit from rated voltage. Do not use as an operating current.) Certifications RoHS, UL810a (750 V) High-Pot Capability10 Page 2 Document number: 1017119.3 4,000 V DC maxwell.com DATASHEET 56V MODULE TYPICAL CHARACTERISTICS THERMAL CHARACTERISTICS Thermal Resistance BMOD0130 P056 B03 0.50oC/W (Rca, All Cell Cases to Ambient), typical8 Thermal Capacitance (Cth), typical 16,000 J/oC Maximum Continuous Current (ΔT = 15oC)8 61 A, RMS Maximum Continuous Current (ΔT = 40 C) 99 A, RMS o 8 LIFE DC Life at High Temperature1 (held continuously at Rated Voltage & Maximum Operating Temperature) 8 years Capacitance Change 20% ESR Change 100% (% decrease from minimum initial value) (% increase from maximum initial value) Projected DC Life at 25°C1 14 years (held continuously at Rated Voltage) Capacitance Change 20% ESR Change 100% (% decrease from minimum initial value) (% increase from maximum initial value) Shelf Life 4 years (Stored uncharged at 25°C) Page 3 Document number: 1017119.3 maxwell.com DATASHEET 56V MODULE ESR AND CAPACITANCE VS TEMPERATURE 180% Capacitance DC ESR Percentage change from value at 25°C 170% 160% 150% 140% 130% 120% 110% 100% 90% 80% -60 -40 -20 0 20 40 60 80 Temperature (°C) NOTES 1. Capacitance and ESRDC measured at 25°C using specified test current per waveform below. 2. Absolute maximum voltage, non-repeated. Not to exceed 1 second. 3. After 72 hours at rated voltage. Initial leakage current can be higher. 0.12V2 4. Per IEC 62391-2, Pd = ESRDC x mass V2 5. Pmax = 4 x ESR x mass DC 6. Emax = ½ CV2 3,600 x mass 2 7. Estored = ½ CV 3,600 Page 4 Document number: 1017119.3 maxwell.com 8. ∆T=IRMS2 x ESR x Rca 9. Per United Nations material classification UN3499, all Maxwell ultracapacitors have less than 10 Wh capacity to meet the requirements of Special Provisions 361. Both individual ultracapacitors and modules composed of those ultracapacitors shipped by Maxwell can be transported without being treated as dangerous goods (hazardous materials) under transportation regulations. 10. Duration = 60 seconds. Not intended as an operating parameter. DATASHEET 56V MODULE MOUNTING RECOMMENDATIONS MARKINGS 4 the user manual for installation 3 Please refer to recommendations. 2 1 Products are marked with the following information: Rated capacitance, rated voltage, product number, name of manufacturer, positive and negative terminal, warning marking, serial number. D D BMOD0130 P056 B03 M10 NEGATIVE TERMINAL LEFT SIDE 312.8±2.0 M8 POSITIVE TERMINAL 20.0±1.0 TYP. 218.2 1.0 BMOD0130 P056 BO3 MONITOR CABLE ONLY, 150 MIN C C 175 MAX H T 74.9 2 BRASS INSERT FACE 100.0±2.0 B 22 5.1±1.0 135.0 1.0 218.2 1.0 RIGHT SIDE 17.0±2.0 149.1±2.0 70.6 1.0 L 683 MAX W 5.1±1.0 B 32.2±2.0 177 MAX 652.2±3.0 TYPICAL WIDTH FROM BRASS INSERT FACE Part Description Dimensions (mm) W (max) H (max) L (max) BMOD0130 P056 B03 683 177 175 T (±2mm) Package Quantity 74.9 1 A A BRASS INSERT FACE 3 4 SIZE CAGE CODE B 68911 164.3±1.5 TYPICAL WIDTH FROM BRASS INSERT FACE BOTTOM SCALE 2 1:5 DOC. NO. PART NO. 108880, 109358 REV 1017268 2 SHEET REV 2 2 OF 2 1 B-PG1 REV A 7/01 Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by the following U.S. patents and their respective foreign counterparts: 6643119, 7295423, 7342770, 7352558, 7384433, 7440258, 7492571, 7508651, 7791860, 7791861, 7859826, 7883553, 7935155, 8072734, 8098481, 8279580, and patents pending. Maxwell Technologies, Inc. Global Headquarters 3888 Calle Fortunada San Diego, CA 92123 USA Tel: +1 858 503 3300 Fax: +1 858 503 3301 Maxwell Technologies SA Route de Montena 65 CH-1728 Rossens Switzerland Tel: +41 (0)26 411 85 00 Fax: +41 (0)26 411 85 05 Maxwell Technologies, GmbH Leopoldstrasse 244 80807 München Germany Tel: +49 (0)89 / 4161403 0 Fax: +49 (0)89 / 4161403 99 Maxwell Technologies Shanghai Trading Co. Ltd. Unit A2,C 12th Floor Huarun Times Square 500 Zhangyang Road, Pudong New Area Shanghai 200122, P.R. China Phone: +86 21 3852 4000 Fax: +86 21 3852 4099 MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGY’S FUTURE, BOOSTCAP, C CELL, D CELL and their respective designs and/or logos are either trademarks or registered trademarks of Maxwell Technologies, Inc. and may not be copied, imitated or used, in whole or in part, without the prior written permission from Maxwell Technologies, Inc. All contents copyright © 2013 Maxwell Technologies, Inc. All rights reserved. No portion of these materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc. Page 5 Document number: 1017119.3 maxwell.com Maxwell Technologies Korea, Ltd. Room 1524, D-Cube City Office Tower, 15F #662 Gyeongin-Ro, Guro-Gu, Seoul, 152-706 South Korea Phone: +82 10 4518 9829