Product Brief MICROWAVE & HIGH RELIABILITY PRODUCTS SMI7030 Broadband Wireless RFIC Supports 802.16d and 802.16e protocols Product Description RFIC Receive Characteristics SMI7030 is a dual band transceiver RFIC. The transceiver uses a super heterodyne architecture with off chip channelization. This provides for maximum dynamic range and interference rejection. 4 4 4 4 4 4 4 4 4 Product Highlights 4 Dual band transceiver RFIC supports 802.16 d/e WiMAX applications 4 Compatible with multiple baseband ICs 4 Enables low cost CPEs 4 Half duplex FDD mode and TDD mode 4 Frequency coverage: 2.3 - 2.7 GHz and 3.3 - 3.8 GHz Package 48-Pin QFN, 7x7 mm -100 to -10 dBm input range >90 dB gain control P1 dB >-4 dBm (typical) NF 7 dB (typical) Input IP3: +6 dBm (typical) SNDR >31 dB (60 dB range) IF of 20 to 70 MHz supported On-chip image reject BPF Image rejection: 32 dB (typical) RFIC Transmit Characteristics 4 4 4 4 4 >60 dB gain control range EVM <-35 dB (0 dBm out) LO leakage: 30 dB Image rejection: 43 dB Transmit noise power: -70 dBm/1MHz (max Pout) RFIC Integrated Synthesizer w/VCO 4 4 4 4 4 32 MHz reference 125 kHz step size 0.7 rms phase noise (typical) <45 μsec settling time FDD mode <10 μsec settling time TDD mode W W W .SE MTE CH .COM SIERRA MONOLITHICS Product Brief SMI7030 Block Diagram Field Proven Chips and Modules Transmit Mask @ +21 dBm External PA SMI7030 Evaluation Board TX Phase Noise Measurement Transmit EVM Sierra Monolithics Inc. is now part of Semtech Incorporated. ©2010 Semtech Corporation. All Rights Reserved. Specification subject to change without notice. W W W .SE MTE CH .COM SIERRA MONOLITHICS SMI7030-PB