VIPerPlus Your SMPS design deserves a Plus BRVIPER0915.indd 1 9/4/2015 3:59:44 PM BRVIPER0915.indd 2 9/4/2015 3:59:44 PM Content Where every mW counts........................................................ 5 VIPerPlus* lines.......................................................................... 7 VIPerPlus*5 line: quasi-resonant.................................................7 VIPerPlus*6 line: minimal BoM & automotive............................7 VIPerPlus*7 line: brown out.........................................................8 VIPerPlus*8 line: peak power......................................................8 VIperPlus0P: zero power mode...................................................9 VIPerPlus*1 line: minimal BoM & low voltage applications.....9 A Plus for your applications................................................. 10 A Plus for metering.....................................................................10 A Plus for lighting........................................................................10 A Plus for home appliances......................................................11 A Plus for home automation.....................................................11 A Plus for consumer and adapters..........................................12 A Plus for automotive.................................................................12 Evaluation boards.................................................................. 13 Available in a click................................................................ 15 BRVIPER0915.indd 3 9/4/2015 3:59:44 PM BRVIPER0915.indd 4 9/4/2015 3:59:44 PM Where every mW counts More than 10 years ago, ST launched the first series of VIPer® (Vertical Intelligent Power Enhanced Regulator) high-voltage converters for mains supplies. Today, power supply units require more sophisticated methods for improving performance while energy-saving regulations push for greater efficiency. VIPerPlus accepts the challenge, combining an 800 V avalanche rugged power section with state-ofthe art PWM circuitry for control, and offering a comprehensive set of features and built-in protections. The result is an SMPS design that meets the most demanding energy-saving regulations and more: high reliability, flexibility and minimal component count. MAIN APPLICATIONS GET IT ALL WITH VIPerPlus • Metering • A Plus in efficiency • • Lighting The easiest way to comply with the most stringent energy-saving regulations • A Plus in reliability • Home appliances • • Home automation • • Consumer and adapters For an improved SMPS lifetime 800 V avalanche-rugged power MOSFET allowing ultra wide Vac input range to be covered • A Plus in versatility • • Automotive • Fitting most popular topologies and power ranges up to 15 W Smart stand by architecture using VIPer zero power • A Plus in cost-effectiveness • 5 Small, highly-integrated ICs reduce the number of required external components MAIN FUNCTIONAL BLOCKS Feedback VIPerPLUS AC ~ PWM controller DC bus Zero-power mode VIPerPlus0P Low voltage/minimal BoM VIPerPlus*1 line Quasi resonant VIPerPlus*5 line Minimal BoM VIPerPlus*6 line Brown-out VIPerPlus*7 line Peak power VIPerPlus*8 line Different control selections FAMILY PORTRAIT VBVDSS: 800 V VIPer0P* VIPer01 VIPer11 ** VIPer25 VIPer06 VIPer35 VIPer16 VIPer26 VIPer17 VIPer27 VIPer37 VIPer28 VIPer38 Different MOSFET sizes for different output power capabilities Flyback converter: 85-265 VAC Viper11: coming soon BRVIPER0915.indd 5 4W 6W Buck converter 100 mA 200 mA Max RDSON / IDLIM 32 Ω 350 mA 24 Ω 400 A 7W 12 W 15 W ** 200 mA/ 300 mA 350 mA 600 mA 20 Ω 400 mA/**600 mA 7Ω 700 mA 4.5 Ω 1A * * 9/4/2015 3:59:44 PM DIFFERENTIATORS - FIND THE PLUS FOR YOUR APPLICATION VIPer*5 Quasi-resonant Jittered frequency (30, 60 or 115/120 kHz) VIPer0P VIPer*1 VIPer*6 VIPer*5 Brown-out protection (settable) VIPer*7 VIPer*7 VIPer*1 Low input voltage (18 VDC) VIPer*8 Extra power timer (peak power) 6 VIPer*8 Double-level OCP VIPer*5 Feed forward compensation VIPer*5 Embedded E/A 3.3 V, 1.2 V (V*1 & V0P) VIPer0P Floating E/A ground (for easy negative output setting) VIPer0P Self-supply option (remove auxiliary winding) VIPer*1 VIPer*6 VIPer0P VIPer*1 VIPer*6 Wide range VCC (4.5 to 30 V) VIPer0P VIPer*1 VCC protection VIPer0P VIPer*1 Flux runaway protection (for low start up peak current) VIPer0P VIPer*1 Zero power mode (ZPM) VIPer0P VIPer*7 VIPer*8 VIPer*7 VIPer*8 VIPer*6 Input OVP VIPer*1 Output OVP VIPer*1 VIPer*5 VIPer*1 VIPer*5 VIPer*6 VIPer*7 VIPer*8 15 mW 30 mW 30 mW 30 mW 30 mW VIPer*7 VIPer*8 PWM current mode using optocoupler Cycle-by-cycle OCP Light load management (Burst mode / PFM) Soft start up Thermal shutdown Short-circuit protection Automatic restart after fault VIper0P 10 mW 4 mW (ZPM) Legend: New TOPOLOGIES- BEST FIT FOR THE MOST POPULAR ARCHITECTURES Isolated flyback Non-isolated BRVIPER0915.indd 6 Primary Side Regulation (PSR) VIPer0P VIPer*1 Secondary Side Regulation (SSR) VIPer0P VIPer*1 Flyback/buck/buck boost VIPer0P VIPer*1 VIPer*6 VIPer*5 VIPer*6 VIPer*6 9/4/2015 3:59:45 PM VIPerPlus lines VIPerPlus*5 LINE: QUASI-RESONANT VIPer25 VIPer35 12 W 15 W VBVDSS 800 V Max RDSON 7 Ω IDLIM 700 mA Max RDSON 4.5 Ω IDLIM 1 A DIFFERENTIATORS RECOMMENDED FOR • The quasi-resonant operation reduces the switching losses and improves power conversion • Consumer efficiency at wide range load • Adapters • Quasi resonant operations reduces the EMI allowing to minimize the input filter size • Air conditioning • Feed forward compensation allows a stable power capability for a wide input voltage • Embedded protections: output OVP, short circuit/OLP, 2nd OCP, settable brown-out 7 • Topology supported: isolated flyback- SSR VIPerPlus*6 LINE: MINIMAL BoM & AUTOMOTIVE VIPer06 VIPer16 VIPer16A* VIPer26 4W 6W 12 W VBVDSS 800 V / *VBVDSS 725 V Max RDSON 32 Ω IDLIM 350 mA Max RDSON 24 Ω IDLIM 400 mA Max RDSON 7 Ω IDLIM 700 mA DIFFERENTIATORS RECOMMENDED FOR • Fixed frequency with jittering reduces the EMI allowing the minimal bill of material and • Home appliances reduces the number of required external components • Lighting • Integrated error amplifier allows direct feedback using a resistor divider • Home automation • No auxiliary winding costs • Metering • Feedback disconnection protection • Automotive • Topology supported: flyback (PSR and SSR), buck, and buck-boost * AEC-Q100 qualified BRVIPER0915.indd 7 9/4/2015 3:59:45 PM VIPerPlus*7 LINE: BROWN-OUT VIPer17 VIPer27 VIPer37 6W 12 W 15 W VBVDSS 800 V Max RDSON 24 Ω IDLIM 400 mA Max RDSON 7 Ω IDLIM 700 mA Max RDSON 4.5 Ω IDLIM 1 A DIFFERENTIATORS RECOMMENDED FOR • Fixed frequency with jittering reduces the EMI allowing the minimal bill of material and • Adapters reduces the number of required external components • Lighting • Brown out protection with configurable minimum input voltage • Industrial power supplies • Embedded protections: output OVP, short circuit/OLP, 2nd OCP • Air conditioning • Topology supported: isolated flyback-SSR VIPerPlus*8 LINE: PEAK POWER VIPer28 VIPer38 12 W/20 W (peak) 15 W/25 W (peak) 8 VBVDSS 800 V Max RDSON 7 Ω IDLIM 800 mA Max RDSON 4.5 Ω IDLIM 1.15 A DIFFERENTIATORS RECOMMENDED FOR • Fixed frequency with jittering reduces the EMI allowing the minimal bill of material and • Metering reduces the number of required external components • Extra power timer (peak power) for improved response during load transient • Lighting • Consumer • Embedded protections: output OVP, short circuit/OLP, 2nd OCP • Topology supported: isolated flyback-SSR BRVIPER0915.indd 8 9/4/2015 3:59:46 PM VIperPlus0P: ZERO POWER MODE VIPer0P 6W VBVDSS 800 V Max RDSON 20 Ω IDLIM 400 mA DIFFERENTIATORS RECOMMENDED FOR • Fixed frequency with jittering reduces the EMI allowing the minimal bill of material • Home appliances • Zero power mode (ZPM) allows smart turn ON and OFF through button or MCU • Small Home appliances • Integrated error amplifier with 1.2 V reference and floating ground to allow direct feedback • Home lighting and simplify BoM for negative output • Home automation • Wide supply voltage range: 4.5 V to 30 V • • 4.5 V allows external supply from low voltage output (5 V) 30 V allows wide auxiliary voltage in case the transformer is used • Pulse-skip protection to prevent flux runaway and the peak start current • Topology supported: flyback (PSR and SSR), buck, buck-boost VIPerPlus*1 LINE: MINIMAL BoM & LOW VOLTAGE APPLICATION VIPer01 VIPer11* 4W 8W 9 VBVDSS 800 V Max RDSON 30 Ω IDLIM 120/240/360 mA Max RDSON 20 Ω IDLIM 480/600 mA Viper11: coming soon DIFFERENTIATORS RECOMMENDED FOR • Fixed frequency with jittering reduces the EMI allowing the minimal bill of material • Home appliances • Disable pin to set the input or output OVP • Small Home appliances • Integrated error amplifier with 1.2 V reference to allow direct feedback by resistor divider • Home lighting • HV current source starts at 18 VDC input voltage (only VIPer01) • Home automation • Wide supply voltage range: 4.5 V to 30 V • • 4.5 V allows external supply from low voltage output (5 V) 30 V allows wide auxiliary voltage in case the transformer is used • Pulse-skip protection to prevent flux runaway and the peak start current. • Topology supported: flyback (PSR and SSR), buck, buck-boost BRVIPER0915.indd 9 9/4/2015 3:59:46 PM A Plus for your applications A PLUS FOR METERING REQUIREMENTS RECOMMENDED: • High voltage robustness VIPer*6 line • High immunity to electrical discharge VIPer*8 line • Reduced noise in the communication band • Peak power for data transfer KEY BENEFITS FOR METERING BEST-FIT TOPOLOGIES • Three switching frequency options to avoid noise in the communication band • 800 V avalanche-rugged power MOSFET allowing ultra wide range input Vac to be covered • Embedded error amplifier for direct feedback from output or primary regulation • Non isolated converter • • • • Settable timer for peak power capability buck buck boost (negative output) flyback with direct output feedback • Isolated Flyback 10 • • SSR with optocoupler Peak power A PLUS FOR LIGHTING REQUIREMENTS RECOMMENDED: • Low standby consumption • High efficiency • Robustness • Cost saving • Reduced size VIPer*5 line VIPer*6 line VIPer*1 line VIPer0P KEY BENEFITS FOR LIGHTING • Energy-saving: 10 mW @ no load @ 230 Vac and 4 mW in ZPM @ 230 Vac • Quasi-resonant for high efficiency • 800 V avalanche-rugged power MOSFET allowing ultra wide range input Vac to be covered • Reduced peak drain current during the start up • Smart and efficient buck led driver using the floating ground and low ref voltage • Embedded error amplifier for direct feedback from output or primary regulation • Operating temperature: -40 to +150 °C • Brown-out with settable turn-ON and turn-OFF thresholds BRVIPER0915.indd 10 BEST-FIT TOPOLOGIES • Non isolated converter • • • buck buck boost (negative output) flyback with direct output feedback • Isolated Flyback • • • SSR with optocoupler PSR by auxiliary winding Quasi-resonant 9/4/2015 3:59:46 PM A PLUS FOR HOME APPLIANCES REQUIREMENTS RECOMMENDED: • Low standby power VIPer*6 line • High efficiency at light load VIPer*1 line • Small EMI input filter • Ultra-wide input voltage VIPer0P • Small size BEST-FIT TOPOLOGIES KEY BENEFITS FOR HOME APPLICATIONS • Frequency jittering reduces the EMI allowing small input filter • Non isolated converter • • Compliance with the more stringent energy saving regulations • Zero Power Mode allowing IC shut down and wake up using smart interface with MCU for touch button or remote control • • • 800 V avalanche-rugged power MOSFET allowing ultra wide range input Vac to be covered • Self-supply for reduced part count • Isolated Flyback • • Embedded error amplifier for direct feedback from output or primary regulation buck buck boost (negative output) flyback with direct output feedback • SSR with optocoupler PSR by auxiliary winding • Reduced peak drain current during the start up • Wide supply voltage range: 4.5 to 30 V • • 4.5 V allows external supply from low voltage output (5 V) 30 V allows wide auxiliary voltage in case the transformer is used 11 A PLUS FOR HOME AUTOMATION REQUIREMENTS RECOMMENDED: • Small size • Low standby power • High efficiency at light load VIPer*6 line VIPer*1 line • Small EMI input filter VIPer0P • Reduced part count KEY BENEFITS FOR HOME AUTOMATION • Energy saving: 10 mW @ no load @ 230 Vac, 4 mW in ZPM @ 230 Vac • 800 V avalanche-rugged power MOSFET allowing ultra wide range input Vac to be covered • Embedded auto-restart protections • Self-supply for reduced part count • Embedded error amplifier for direct feedback from output or primary regulation • Operating temperature: -40 to +150 °C • Remote control availability through ZPM function (only Viper0P) BRVIPER0915.indd 11 BEST-FIT TOPOLOGIES • Non isolated converter • • • buck buck boost (negative output) flyback with direct output feedback • Isolated Flyback • • SSR with optocoupler PSR by auxiliary winding 9/4/2015 3:59:46 PM A PLUS FOR CONSUMER AND ADAPTERS REQUIREMENTS RECOMMENDED: • Low standby power VIPer*5 line • High efficiency VIPer*8 line • Reliability • Cost saving • Minimized size and weight • Robustness KEY BENEFITS FOR CONSUMER AND ADAPTERS BEST-FIT TOPOLOGIES • Isolated Flyback • Energy saving: 30 mW no load consumption @ 230 Vac • Compliance with the more stringent energy saving regulations • • Quasi resonant for high efficiency • • SSR with optocoupler Peak power Quasi-resonant • 800 V avalanche-rugged power MOSFET allowing ultra wide range input Vac to be covered • Peak power capability for improved response during load transient • Operating temperature: -40 to +150 °C • Brown-out with settable turn-ON and turn-OFF thresholds A PLUS FOR AUTOMOTIVE 12 REQUIREMENTS RECOMMENDED: • AEC-Q100 qualified • Capable of supporting the Production VIPer16A Part Approval Process (PPAP) • Strong thermal robustness • Reliability • Reduced size and BoM KEY BENEFITS FOR AUTOMOTIVE • 725 V avalanche-rugged power MOSFET with embedded failure protections • AEC-Q100 qualified • Operating temperature: -40 to 150 °C • Design 5 W SMPS with minimal bill of material • Energy saving: 30 mW no load consumption @ 230 Vac • Embedded auto-restart protections and thermal shutdown BEST-FIT TOPOLOGIES • Non isolated converter • • • • Isolated Flyback • • BRVIPER0915.indd 12 buck buck boost (negative output) flyback with direct output feedback SSR with optocoupler PSR by auxiliary winding 9/4/2015 3:59:47 PM Evaluation boards NON-ISOLATED, INDUCTOR-BASED TOPOLOGIES - BUCK OR BUCK-BOOST UP TO Iout 200 mA AT WIDE AND ULTRA-WIDE INPUT VOLTAGE RANGE Order code Part number Short description Vin Vout/Iout Document STEVAL-ISA010V1 VIPER16LN Not-isolated buck converter, 60 kHz, DIP7 package 85-500 Vac 12 V ±10%, 5 V ±4%, 150 mA AN2872 STEVAL-ISA096V1 VIPER06XS Not-isolated buck boost converter, 30 kHz, SSO10 package 85-265 Vac -12 V/150 mA UM1470 STEVAL-ISA114V1 VIPER06XS Not-isolated buck converter, 30 kHz, SSO10 package 80-265 Vac 5 V/160 mA AN4273 STEVAL-ISA115V1 VIPER06XS Not-isolated buck converter, 30 kHz, SSO10 package 85-265 Vac 12 V/150 mA AN4260 STEVAL-ISA119V1 VIPER16LD Not-isolated buck converter, 60 kHz, SO16N package 85-265 Vac 12, 5 V/150 mA AN4345 STEVAL-ISA130V1 VIPER06XN Not-isolated buck converter, 30 kHz, DIP7 package 85-375 Vac 12 V/140 mA DN0009 STEVAL-ISA178V1* VIPER013XS Non-isolated buck converter, jittered 30 kHz, SS010 package 85-265 Vac 5 V/200 mA Coming soon STEVAL-ISA179V1* VIPER0PLD Non-isolated buck converter, jittered 60 kHz, SO16N package 85-265 Vac 15 V/150 mA Coming soon UP TO Iout 300 mA AT WIDE INPUT VOLTAGE RANGE Order code Part number Short description Vin Vout/Iout Document STEVAL-ISA116V1 VIPER26LD Not-isolated buck converter, 60 kHz, SO16N package 85-265 Vac 16 V, 5 V/300 mA AN4562 STEVAL-ISA177V1* VIPER013HS Non-isolated flyback, jittered 120 kHz, SS010 package 85-265 Vac 5 V/800 mA Coming soon 13 FLYBACK UP TO 4.5 W AT WIDE INPUT VOLTAGE RANGE - NON ISOLATED Order code Part number Short description Vin Vout/Iout Document STEVAL-ISA112V1 VIPER06HN Not-isolated flyback, 115 kHz, DIP7 package 85-265 Vac 12 V/350 mA AN4116 STEVAL-ISA113V1 VIPER06HS Not-isolated flyback, 115 kHz, SSO10 package 85-265 Vac 12 V/350 mA AN4164 UP TO 4.5 W AT WIDE INPUT VOLTAGE RANGE - ISOLATED Order code Part number Short description Vin Vout/Iout Document STEVAL-ILL017V1 VIPER17HN Isolated flyback (LED driver), 115 kHz DIP7 package 220 ±20% 7 V/500 mA AN2811 STEVAL-ISA134V1 VIPER06HN Isolated flyback, 115 kHz, DIP7 package 85-265 Vac 12 V/330 mA AN4372 STEVAL-ISA135V1 VIPER06HS Isolated flyback, 115 kHz, SSO10 package 85-265 Vac 12 V/330 mA AN4404 STEVAL-ISA136V1 VIPER06HN Isolated flyback, 115 kHz, DIP7 package 85-265 Vac 5 V/600 mA AN4410 STEVAL-ISA137V1 VIPER06HS Isolated flyback, 115 kHz, SSO10 package 85-265 Vac 5 V/600 mA AN4418 *coming soon, prototype available BRVIPER0915.indd 13 9/4/2015 3:59:47 PM UP TO 6 W AT WIDE INPUT VOLTAGE RANGE - NON ISOLATED Order code Part number Short description Vin Vout/Iout Document STEVAL-ISA071V2 VIPER16LN Flyback (negative), 60 kHz, DIP7 package 85-265 Vac -5 V/400 mA, +7 V/160 mA UM0920 STEVAL-ISA118V1 VIPER16LN Flyback, 60 kHz, DIP7 package 85-265 Vac 16 V/280 mA AN3028 STEVAL-ISA129V1 VIPER16HN Flyback,115 kHz, DIP7 package 85-265 Vac 16 V/280 mA Databrief STEVAL-ISA174V1 VIPER0PLD Flyback, jittered 60 kHz, SO16N package 85-265 Vac 7 V, -5 V/1 A Coming soon UP TO 6 W AT WIDE INPUT VOLTAGE RANGE - ISOLATED Order code Part number Short description Vin Vout/Iout Document STEVAL-ISA060V1 VIPER17HN Flyback, 115 kHz, DIP7 package 85-265 Vac 12 V/500 mA AN2753 STEVAL-ISA062V1 VIPER17HN Flyback (double out), 115 kHz, DIP7 package 85-265 Vac 5 V, 12 V/750 mA AN2934 STEVAL-ISA117V1 VIPER16LN Flyback, 60 kHz, DIP7 package 85-265 Vac 12 V/400 mA AN4259 STEVAL-ISA124V1 VIPER17HN Flyback (CC/CV charger), 115 kHz, DIP7 package 85-265 Vac 5 V/1 A AN2840 STEVAL-ISA125V1 VIPER28LN Flyback (PEAK Power), 60 kHz, DIP7 package 85-265 Vac 5 V/2.4 A Databrief STEVAL-ISA126V1 VIPER28HN Flyback (PEAK Power), 115 kHz, DIP7 package 85-265 Vac 5 V/2.4 A AN2950 UP TO 12 W AT WIDE INPUT VOLTAGE RANGE - NON ISOLATED Order code 14 Part number Short description Vin Vout/Iout Document STEVAL-ISA110V1 VIPER26LN Flyback, 60 kHz, DIP7 package 85-265 Vac 12 V/1 A AN4106 STEVAL-ISA111V1 VIPER26HN Flyback, 115 kHz, DIP7 package 85-265 Vac 12 V/1 A AN4165 UP TO 12 W AT WIDE INPUT VOLTAGE RANGE - ISOLATED Order code Part number Short description Vin Vout/Iout Document STEVAL-ISA081V1 VIPER26LN Flyback (PRIMARY reg), 60 kHz, DIP7 package 85-265 Vac 12 V, 3.3 V/1 A UM0984 STEVAL-ISA103V1 VIPER27LN Flyback, 60 kHz, DIP7 package 85-265 Vac 5 V/2.4 A AN2929 STEVAL-ISA122V1 VIPER27HN Flyback, 115 kHz, DIP7 package 85-265 Vac 5 V/2.2 A AN3011 STEVAL-ISA162V1 VIPER25HD Quasi-resonant flyback, 225 kHz frequency limit, SO16N package 85-265 Vac 12 V/830 mA AN4685 STEVAL-ISA175V1 VIPER26HD Flyback, jittered 115 kHz, SO16N package 85-265 Vac 3.3 V, 5 V, 12 V/660 mA Coming soon UP TO 15 W AT WIDE INPUT VOLTAGE RANGE - ISOLATED Order code Part number Short description Vin Vout/Iout Document STEVAL-ISA121V1 VIPER37LE Flyback, 60 kHz, SDIP10 package 85-265 Vac 5 V, 3 A AN4407 STEVAL-ISA140V1 VIPER37HE Flyback, 60 kHz, SDIP10 package 85-265 Vac 12 V/1.2 A AN4419 STEVAL-ISA153V1 VIPER38LE Flyback (PEAK Power), 60 kHz, SDIP10 package 90-265 Vac 12 V/1.2 A peak 1.8 A AN4479 STEVAL-ISA171V1 VIPER35HD Quasi-resonant flyback, 225 kHz frequency limit, SO16N package 85-265 Vac 12 V/1.25 A Coming soon STEVAL-ISA191V1 VIPER37LE Flyback double output, 60 kHz, SDIP10 package 85-265 Vac 12V/1.2A ; 5V/0.75 A Coming soon BRVIPER0915.indd 14 9/4/2015 3:59:47 PM Available in a click SURFACE-MOUNT AND THROUGH-HOLE PACKAGES SO16N DIP7 SDIP10 SSO10 MAKE YOUR DESIGN EASILY USING EDESIGNSUITE 15 For technical documentation, samples and on-line ordering, visit us at: www.st.com/viperplus BRVIPER0915.indd 15 9/4/2015 3:59:50 PM © STMicroelectronics - September 2015 - Printed in United Kingdom - All rights reserved The STMicroelectronics corporate logo is a registered trademark of the STMicroelectronics group of companies All other names are the property of their respective owners Order code: BRVIPER0915 BRVIPER0915.indd 16 For more information on ST products and solutions, visit www.st.com/viperplus 9/4/2015 3:59:50 PM