Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC253LC4 v02.0414 SWITCHES - MULTI-THROW - SMT GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 3.5 GHz Typical Applications Features The HMC253LC4 is ideal for: Ceramic, RoHS Compliant 4x4mm SMT Package • Basestations & Repeaters Non-Reflective Topology • WiMAX/WiBro & Fixed Wireless Low Insertion Loss: 1.2 dB • Cellular/3G Infrastructure Single Positive Supply: Vdd = +5V • CATV/DBS Integrated 3:8 TTL/CMOS Decoder: 0/+3V • Military & Hi-Rel Functional Diagram General Description The HMC253LC4 is a non-reflective SP8T switch in a leadless RoHS compliant 4x4 mm ceramic SMT package featuring wideband operation from DC to 3.5 GHz. The switch offers a single positive bias and true TTL/CMOS compatibility enabling it to operate with 0/+3V control and a +5V supply. A 3:8 decoder is integrated on the switch requiring only 3 control lines and a positive bias to select each path. The HMC253LC4 SP8T will replace multiple configurations of SP4T and SPDT MMIC switches. Electrical Specifications, TA = +25° C, For TTL Control and Vdd = +5V in a 50 Ohm system Parameter Min. Typ. Max. Units 1.1 1.2 1.3 1.5 1.6 1.7 dB dB dB Insertion Loss DC - 2.0 GHz DC - 3.0 GHz DC - 3.5 GHz Isolation DC - 2.0 GHz DC - 3.0 GHz DC - 3.5 GHz 35 31 30 40 36 35 dB dB dB Return Loss “On State” 0.3 - 3.0 GHz 0.3 - 3.5 GHz 15 12 18 14 dB dB Return Loss (RF1-8) “Off State” 0.3 - 3.5 GHz 0.5 - 3.5 GHz 7 10 10 14 dB dB Input Power for 1 dB Compression 0.5 - 3.5 GHz 20 24 dBm Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) 0.5 - 3.5 GHz 40 43 dBm Switching Characteristics 0.3 - 3.5 GHz 30 100 ns ns tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 1 Frequency For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC253LC4 v02.0414 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 3.5 GHz 0 -0.5 -0.5 -1 -1.5 RF1 RF2 RF3 RF4 RF5 RF6 RF7 RF8 -2 -2.5 -1 -1.5 -2 +25C +85C -40C -2.5 -3 -3 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 0 0.5 1 1.5 FREQUENCY (GHz) 0 3 3.5 4 4.5 3 3.5 4 4.5 0 RFC RF1-RF8 ON RF1-RF8 OFF -5 RF1 RF2 RF3 RF4 RF5 RF6 RF7 RF8 -10 -20 -10 ISOLATION (dB) RETURN LOSS (dB) 2.5 Isolation Return Loss -15 -20 -30 -40 -50 -25 -60 -30 -70 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 0 0.5 1 1.5 FREQUENCY (GHz) 2 2.5 FREQUENCY (GHz) Input IP3 Input Compression 55 28 26 COMPRESSION (dBm) 50 IP3 (dBm) 2 FREQUENCY (GHz) SWITCHES - MULTI-THROW - SMT Insertion Loss vs. Temperature 0 INSERTION LOSS (dB) INSERTION LOSS (dB) Insertion Loss 45 RF1 RF2 RF3 RF4 RF5 RF6 RF7 RF8 40 35 24 22 20 1dB COMPRESSION POINT 0.1dB COMPRESSION POINT 18 30 16 0 0.5 1 1.5 2 FREQUENCY (GHz) 2.5 3 3.5 0 0.5 1 1.5 2 2.5 3 3.5 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 2 HMC253LC4 v02.0414 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 3.5 GHz Bias Voltage & Current Truth Table SWITCHES - MULTI-THROW - SMT Vdd Range = +5 Vdc ± 10% 3 Control Input Signal Path State Vdd (Vdc) Idd (Typ.) (mA) Idd (Max.) (mA) A B C +5 6.0 9.0 Low Low Low RF1 High Low Low RF2 RF3 TTL/CMOS Control Voltages RFCOM to: Low High Low State Bias Condition High High Low RF4 Low 0 to +0.8 Vdc @ 5 µA Typ. Low Low High RF5 High +2.0 to +5 Vdc @ 70 µA Typ. High Low High RF6 Low High High RF7 High High High RF8 NOTE: DC Blocking capacitors are required at ports RFC and RF1, 2, 3, 4, 5, 6, 7, 8. Absolute Maximum Ratings Bias Voltage Range (Port Vdd) +7.0 Vdc Control Voltage Range (A, B, C) -0.5V to Vdd +1Vdc Channel Temperature 150 °C Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Maximum Input Power Vdd = +5V +20 dBm (0.05 - 0.5 GHz) +25 dBm (0.5 - 3.5 GHz) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC253LC4 v02.0414 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 3.5 GHz NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. SWITCHES - MULTI-THROW - SMT Outline Drawing Package Information Part Number Package Body Material Lead Finish HMC253LC4 Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H253 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 4 HMC253LC4 v02.0414 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 3.5 GHz SWITCHES - MULTI-THROW - SMT Pin Descriptions 5 Pin Number Function Description 1, 3, 5, 7, 12, 14, 16, 18, 20, 21, 23 GND Package bottom has exposed metal paddle that must also be connected to RF ground. 2, 4, 6, 13, 15, 17, 19, 22, 24 RF1 - RF8 & RFC This pin is DC coupled and matched to 50 Ohms. Blocking capacitors are required. 8 Vdd Supply Voltage +5 Vdc ±10% 9 CTLC 10 CTLB 11 CTLA Interface Schematic See truth table and control voltage table. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC253LC4 v02.0414 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 3.5 GHz SWITCHES - MULTI-THROW - SMT Evaluation Circuit Board List of Materials for Evaluation PCB 107780 [1] Item Description J1 - J9 PCB Mount SMA Connector J10 - J14 DC Pin C1 - C9 100 pF Capacitor, 0402 Pkg. C10 0.01 uF Capacitor, 0603 Pkg. U1 HMC253LC4 SP8T Switch PCB [2] 104687 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines at the RF ports should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown above. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 6