HMC344LH5 Data Sheet PDF

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC344LH5
v00.0805
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 12 GHz
Typical Applications
Features
This switch is suitable for DC - 12.0 GHz 50-Ohm
Systems
Broadband Performance: DC - 12 GHz
• Telecom Infrastructure
Low Insertion Loss: 1.8 dB@ 6 GHz
• Military Radio, Radar & ECM
Integrated 2:4 TTL Decoder
• Space Systems
Hermetic SMT Package, 25 mm 2
• Test Instrumentation
High Isolation: 42 dB@ 6 GHz
Screening to MIL-PRF-38535 (Class B or S) Available
Functional Diagram
General Description
The HMC344LH5 is a broadband non-reflective GaAs
MESFET SP4T switch in a hermetic SMT leadless
package. Covering DC to 12 GHz, this switch offers
high isolation and low insertion loss. This switch also
includes an on board binary decoder circuit which
reduces the required logic control lines to two. The
switch operates using a negative control voltage
of 0/-5V, and requires a fixed bias of -5V. Simple
external level shifting circuitry allows this switch to
be controlled with most TTL/CMOS positive logic
families. The HMC344LH5 allows the use of surface
mount manufacturing techniques and is suitable
for high reliability military, industrial and space
applications.
SWITCHES - SMT
10
Electrical Specifi cations, TA = +25° C, With Vee = -5V & 0/-5V Control, 50 Ohm System
Parameter
10 - 196
Frequency
Insertion Loss
DC - 2.0 GHz
DC - 6.0 GHz
DC - 8.0 GHz
DC - 12.0 GHz
Isolation
DC - 2.0 GHz
DC - 4.0 GHz
DC - 6.0 GHz
DC - 8.0 GHz
DC - 12.0 GHz
Min.
48
43
37
35
30
Typ.
Max.
Units
1.5
1.8
2.1
3.0
1.9
2.2
2.5
3.4
dB
dB
dB
dB
53
48
42
40
35
dB
dB
dB
dB
dB
Return Loss
“On State”
DC - 10.0 GHz
DC - 12.0 GHz
17
12
dB
dB
Return Loss
“Off State”
DC - 8.0 GHz
DC - 12.0 GHz
16
10
dB
dB
Input Power for 1 dB Compression
0.5 - 12.0 GHz
27
dBm
Input Third Order Intercept
(Two-Tone Input Power = +7 dBm Each Tone)
0.5 - 4.0 GHz
4.0 - 8.0 GHz
8.0 - 12.0 GHz
24
50
47
44
dBm
dBm
dBm
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
DC - 12.0 GHz
35
75
ns
ns
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC344LH5
v05.0505
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 12 GHz
Insertion Loss vs. Temperature
Isolation
0
0
ISOLATION (dB)
RF1
RF2
RF3
RF4
-2
+25C
+85C
-40C
-3
-30
-45
-60
-75
-4
-90
0
2
4
6
8
10
12
0
2
FREQUENCY (GHz)
8
10
12
10
0.1 and 1 dB Input Compression Point
0
30
INPUT COMPRESSION (dBm)
RETURN LOSS (dB)
6
FREQUENCY (GHz)
Return Loss
RFC
RF1, RF2, RF3, RF4 ON
RF1, RF2, RF3, RF4 OFF
-5
-10
-15
27
24
1.0dB Compression Point
0.1dB Compression Point
21
18
15
-20
0
2
4
6
8
10
12
0
2
4
6
8
10
12
FREQUENCY (GHz)
FREQUENCY (GHz)
Bias Voltage & Current
Input Third Order Intercept Point
INPUT THIRD ORDER INTERCEPT (dBm)
4
SWITCHES - SMT
INSERTION LOSS (dB)
-15
-1
Vee Range = -5.0 Vdc ± 10%
55
50
45
Vee
(Vdc)
Iee (Typ.)
(mA)
Iee (Max.)
(mA)
-5.0
3.0
6.0
Control Voltages
RF1
RF2
RF3
RF4
40
State
Bias Condition
Low
-3V to 0 Vdc @ 40 uA Typical
High
-5 to -4.2 Vdc @ 5 uA Typical
35
0
2
4
6
8
10
12
FREQUENCY (GHz)
* Isolation is recorded above insertion loss & measured at output of switch.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 197
HMC344LH5
v05.0505
Absolute Maximum Ratings
SWITCHES - SMT
10
Bias Voltage Range (Vee)
-7.0 Vdc
Control Voltage Range (A & B)
Vee -0.5V to +1.0 Vdc
Channel Temperature
150 °C
Thermal Resistance
(Insertion Loss Path)
157 °C/W
Continuous Pdiss (T= 85 °C )
(derate 6.4 mW/°C above 85 °C)
0.42 W
Thermal Resistance
(Terminated Path)
264 °C/W
Continuous Pdiss (T= 85 °C )
(derate 3.8 mW/°C above 85 °C)
0.25 W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Maximum Input Power
+28 dBm (0.5 - 12.0 GHz)
ESD Sensitivity (HBM)
Class 1A
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 12 GHz
Truth Table
Control Input
Signal Path State
A
B
RFC to:
High
High
RF1
Low
High
RF2
High
Low
RF3
Low
Low
RF4
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: CERAMIC & KOVAR
2. LEAD AND GROUND PADDLE PLATING: GOLD 40 - 80 MICROINCHES.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PAD BURR LENGTH 0.15mm MAX.
PAD BURR HEIGHT 0.25mm MAX.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
10 - 198
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC344LH5
v05.0505
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 12 GHz
Pin Descriptions
Pin Number
Function
Description
1, 3,
7, 9, 11
RF4, RF3, RF2,
RF1, RFC
This pin is DC coupled and matched to 50 Ohm. Blocking
capacitors are required if RF line potential is not equal to 0V.
2, 8, 10, 12
GND
Package base must also be connected to PCB RF ground.
4
Vee
Supply Voltage -5V ± 10%
5
B
See truth table and control voltage table.
Interface Schematic
10
A
See truth table and control voltage table.
TTL Interface Circuit
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
SWITCHES - SMT
6
10 - 199
HMC344LH5
v05.0505
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 12 GHz
Evaluation PCB
SWITCHES - SMT
10
List of Materials for Evaluation PCB 110760 [1]
Item
Description
J1 - J5
PCB Mount SMA RF Connector
J6 - J9
DC Pin
C1
10k pF Capacitor, 0603 Pkg.
U1
HMC344LH5 SP4T Switch
PCB [2]
110758 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
10 - 200
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 ohm impedance and the package ground leads
and package base should be connected directly to
the ground plane similar to that shown above. The
evaluation circuit board shown above is available
from Hittite Microwave Corporation upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC344LH5
v05.0505
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 12 GHz
Notes:
SWITCHES - SMT
10
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 201