VT2080S-E3, VFT2080S-E3, VBT2080S-E3, VIT2080S-E3 Datasheet

VT2080S-E3, VFT2080S-E3, VBT2080S-E3, VIT2080S-E3
www.vishay.com
Vishay General Semiconductor
Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.46 V at IF = 5 A
FEATURES
TMBS ®
TO-220AB
• Trench MOS Schottky technology
ITO-220AB
• Low forward voltage drop, low power losses
• High efficiency operation
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C (for TO-263AB package)
2
3
1
1
2
3
VFT2080S
VT2080S
PIN 1
PIN 2
PIN 1
PIN 3
CASE
PIN 3
TO-263AB
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PIN 2
TYPICAL APPLICATIONS
TO-262AA
For use in high frequency converters, switching power
supplies, freewheeling diodes, OR-ing diode, DC/DC
converters and reverse battery protection.
K
K
MECHANICAL DATA
A
NC
1
VBT2080S
NC
HEATSINK
A
2
3
VIT2080S
K
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AB, ITO-220AB, and
TO-262AA package)
PIN 1
PIN 2
PIN 3
K
PRIMARY CHARACTERISTICS
Case:
TO-220AB,
ITO-220AB,
TO-263AB
and
TO-262AA
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
per
Polarity: As marked
IF(AV)
20 A
Mounting Torque: 10 in-lbs maximum
VRRM
80 V
IFSM
150 A








VF at IF = 20 A
0.70 V
TJ max.
150 °C
Package
TO-220AB, ITO-220AB,
TO-263AB, TO-262AA
Diode variations
Single die
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VT2080S
VFT2080S VBT2080S
VIT2080S
UNIT
Maximum repetitive peak reverse voltage
VRRM
80
V
Maximum average forward rectified current (fig. 1)
IF(AV)
20
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load per diode
IFSM
150
A
Non-repetitive avalanche energy at TJ = 25 °C, L = 60 mH
EAS
160
mJ
Peak repetitive reverse current at tp = 2 μs, 1 kHz,
TJ = 38 °C ± 2 °C
IRRM
1.0
A
Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min
Operating junction and storage temperature range
VAC
1500
V
TJ, TSTG
-55 to +150
°C
Revision: 11-May-16
Document Number: 89167
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VT2080S-E3, VFT2080S-E3, VBT2080S-E3, VIT2080S-E3
www.vishay.com
Vishay General Semiconductor
Revision: 11-May-16
Document Number: 89167
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VT2080S-E3, VFT2080S-E3, VBT2080S-E3, VIT2080S-E3
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
IF = 5 A
IF = 10 A
Instantaneous forward voltage
TA = 25 °C
IF = 20 A
VF (1)
IF = 5 A
IF = 10 A
TA = 125 °C
IF = 20 A
VR = 80 V
Reverse current
TA = 25 °C
IR (2)
TA = 125 °C
TYP.
MAX.
0.52
-
UNIT
0.61
-
0.80
0.92
0.46
-
0.54
-
0.70
0.78
30
700
μA
20
35
mA
V
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance
SYMBOL
VT2080S
VFT2080S
VBT2080S
VIT2080S
UNIT
RJC
1.8
5.0
1.8
1.8
°C/W
ORDERING INFORMATION (Example)
PACKAGE
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AB
VT2080S-E3/4W
PREFERRED P/N
1.88
4W
50/tube
Tube
ITO-220AB
VFT2080S-E3/4W
1.75
4W
50/tube
Tube
TO-263AB
VBT2080S-E3/4W
1.38
4W
50/tube
Tube
TO-263AB
VBT2080S-E3/8W
1.38
8W
800/reel
Tape and reel
TO-262AA
VIT2080S-E3/4W
1.45
4W
50/tube
Tube
Revision: 11-May-16
Document Number: 89167
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VT2080S-E3, VFT2080S-E3, VBT2080S-E3, VIT2080S-E3
www.vishay.com
Vishay General Semiconductor
Instantaneous Reverse Current (mA)
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Average Forward Current (A)
24
Resistive or Inductive Load
V(B,I)T2080S
20
16
VFT2080S
12
8
4
0
0
25
75
50
100
125
150
175
100
TA = 150 °C
10
TA = 125 °C
1
TA = 100 °C
0.1
TA = 25 °C
0.01
0.001
20
Case Temperature (°C)
D = 0.2
16
14
D = 0.1
D = 1.0
12
10
8
T
6
4
2
D = tp/T
4
8
12
16
20
80
70
90
1000
100
1
10
100
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 5 - Typical Junction Capacitance
Transient Thermal Impedance (°C/W)
TA = 150 °C
TA = 125 °C
10
TA = 100 °C
1
TA = 25 °C
0.1
0
0.2
0.4
0.6
0.8
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
0.1
24
100
Instantaneous Forward Current (A)
60
tp
0
0
50
10 000
D = 0.8
Junction Capacitance (pF)
Average Power Loss (W)
D = 0.5
D = 0.3
18
40
Fig. 4 - Typical Reverse Characteristics
Fig. 1 - Maximum Forward Current Derating Curve
20
30
Percent of Rated Peak Reverse Voltage (%)
1.0
1.2
10
Junction to Case
VFT2080S
V(B,I)T2080S
1
0.1
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Revision: 11-May-16
Document Number: 89167
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VT2080S-E3, VFT2080S-E3, VBT2080S-E3, VIT2080S-E3
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
0.415 (10.54)
0.380 (9.65)
0.404 (10.26)
0.384 (9.75)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
1
PIN
2
3
0.160 (4.06)
0.140 (3.56)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.104 (2.65)
0.096 (2.45)
1
0.135 (3.43) DIA.
0.122 (3.08) DIA.
7° REF.
0.350 (8.89)
0.330 (8.38)
2
3
7° REF.
0.191 (4.85)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
0.560 (14.22)
0.530 (13.46)
0.035 (0.89)
0.025 (0.64)
0.025 (0.64)
0.015 (0.38)
0.105 (2.67)
0.095 (2.41)
0.022 (0.56)
0.014 (0.36)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.057 (1.45)
0.045 (1.14)
0.035 (0.90)
0.028 (0.70)
0.205 (5.20)
0.195 (4.95)
0.671 (17.04)
0.651 (16.54)
PIN
0.603 (15.32)
0.573 (14.55)
0.057 (1.45)
0.045 (1.14)
0.110 (2.79)
0.100 (2.54)
7° REF.
0.076 (1.93) REF.
45° REF.
0.600 (15.24)
0.580 (14.73)
0.635 (16.13)
0.625 (15.87)
0.190 (4.83)
0.170 (4.32)
0.076 (1.93) REF.
0.185 (4.70)
0.175 (4.44)
0.161 (4.08)
0.139 (3.53)
ITO-220AB
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
TO-262AA
0.185 (4.70)
0.175 (4.44)
0.411 (10.45) MAX.
0.250 (6.35) MIN.
30° (TYP.)
(REF.)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.045 (1.14)
K
0.950 (24.13)
0.920 (23.37)
1
PIN
2
0.510 (12.95)
0.470 (11.94)
0.401 (10.19)
0.381 (9.68)
0.350 (8.89)
0.330 (8.38)
3
0.160 (4.06)
0.140 (3.56)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.104 (2.65)
0.096 (2.45)
0.035 (0.90)
0.028 (0.70)
0.022 (0.56)
0.014 (0.35)
0.205 (5.20)
0.195 (4.95)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.055 (1.40)
0.045 (1.14)
Mounting Pad Layout
0.42 (10.66) MIN.
K
0.360 (9.14)
0.320 (8.13)
NC
K
A
0.624 (15.85)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.33 (8.38) MIN.
0.670 (17.02)
0.591 (15.00)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Revision: 11-May-16
Document Number: 89167
5
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000