WILLAS FM120-M+ THRU MBR10100AULPS 10.0A SCHOTTKY BARRIER RECTIFIERS 100V FM1200-M+ 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V TO-277A PACKAGE Pb Free Product SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. Features • Low power loss, high efficiency. • High current capability, low forward voltage drop. Low surge forward voltage drop capability. • High Super long lifeprotection. foroperating overvoltage • Guardring Leadhigh-speed Free Finish/RoHS Compliant(Note 1) switching. • Ultra planar metal silicon junction. • Silicon Epoxyepitaxial meets UL 94 chip, V-0 flammability rating meet environmental standards of • Lead-free Moisture parts Sensitivity Level 1 • • • • • 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) MIL-STD-19500 /228 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Maximum Ratings Mechanical data TO-277A • Operating Temperature: -55°C to +125°C : UL94-V0 rated flame retardant • • Epoxy Storage Temperature: -55°C to +125°C SOD-123H • Case : Molded plastic, Device Maximum Maximum, • Terminals :PlatedMarking terminals, solderable per MIL-STD-750 Recurrent RMS P a r t N u m Method ber 2026 Peak Reverse Voltage Voltage • Polarity : Indicated by cathode band MBR10100AULPS 10100U 100V 70V : Any • Mounting Position 0.040(1.0) 0.024(0.6) 0.031(0.8) Typ. 0.031(0.8) Typ. Maximum DC Blocking Voltage Dimensions in inches and (millimeters) 100V • Weight : Approximated 0.011 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT Marking Code 12 13 14 20 30Specified 40 Maximum Recurrent Characteristics Peak Reverse Voltage @ 25°C Unless VRRM Otherwise Electrical MaximumAverage RMS Voltage Forward IF(AV) Typical Junction Capacitance (Note 1) 35 42 56 70 105 140 60 80 100 150 200 Volts IFSM RΘJA VF Operating Temperature Range Storage Temperature Range CJ .68V TJ TSTG Maximum DC SYMBOL ReverseCHARACTERISTICS Current At MaximumRated ForwardDC Voltage at 1.0A DC VF Blocking MaximumVoltage Average Reverse Current at @T A=25℃ IR IR 0.15mA @T A=125℃ Rated DC Blocking Voltage NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. Volts 50 8.3ms, half sine Voltage Drop Per Element 120 200 28 180A IO Typical Thermal Resistance (Note 2) 115 150 40 Forward Surge Current IFSM MaximumPeak Average Forward Rectified Maximum Forward superimposed on rated load (JEDEC method) 10 100 30 20 Current 18 80 21 = 90°C VDC Peak Forward Surge Current 8.3 ms single half sine-wave 14 TL 16 60 Volts MaximumCurrent DC Blocking Voltage V10A RMS 15 50 IFM = 10 A 1.0 PIN 3 HEAT 30 SINK 40 INCHES 120 Amps PIN 2 PIN 1 Amps ℃/W MM PF A .039 .047 -55 1.00 to +150 1.20 ℃ A2 .006 .017 0.20 0.30 65 to +175 ℃ b1 .030 .041 1.10 1.20 b2 .065 .077 1.90 2.10 D .148 .169 4.20 4.40 FM120-MH FM130-MH FM140-MH FM150-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT D2 FM160-MH .110 .126 3.95 4.05 E .250 .264 6.30 6.50 Volts 0.9 0.92 0.50 0.70 0.85 e .065 .077 2.00 2.10 E1 .207 .228 5.90 6.10 0.5 mAmps E2 .149 .157 3.79 3.99 10 J L .027 .031 0.68 0.78 W .025 .029 0.63 0.73 F .022 .026 0.55 0.65 G .177 .185 4.50 4.70 -55 to +125 T = 25°C 2- Thermal Resistance From Junction to Ambient Notes: 1. High Temperature Solder Exemption Applied, see EU Directive Annex 7. 2012-06 2014-03 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. WILLAS FM120-M+ THRU MBR10100AULPS 10.0A SCHOTTKY BARRIER RECTIFIERS 100V FM1200-M+ 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V TO-277A PACKAGE Pb Free Product SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. • Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. overvoltage protection. • Guardring for RATINGS AND CHARACTERISTICS CURVES • Ultra high-speed switching. (TA = 25 qC unless otherwise noted) • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of 0.146(3.7) 0.130(3.3) 0.071(1.8) 0.056(1.4) MIL-STD-19500 /228 12 100 Instantaneous Reverse Current (mA) • RoHS product for packing code suffix "G" Average Forward Current (A) Halogen free product for packing code suffix "H" 10 Mechanical data • Epoxy8 : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H 6 , • Terminals :Plated terminals, solderable per MIL-STD-750 • Polarity : Indicated by cathode band 2 Position : Any • Mounting • Weight0 : Approximated 0.011 gram 0 25 50 75 100 1 Instantaneous Forward Current (A) Marking Code 0.031(0.8) Typ. 0.1 TA =in25inches °C Dimensions and (millimeters) 0.01 150 10 175 RATINGS 20 30 50 60 70 80 90 100 Fig. 2 - Typical Reverse Characteristics SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT Maximum Recurrent10Peak Reverse Voltage VRRM 12 20 13 30 14 40 15 50 16 60 18 80 10 100 115 150 120 200 Volts Maximum RMS Voltage TA = 125 °C VRMS 14 21 28 35 42 56 70 105 140 Volts Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 150 200 Volts 1 IO Peak Forward Surge Current 8.3 ms single half sine-wave 0.1 T = 25 °C IFSM 1.0 30 Maximum Average Forward Rectified Current 40 CHARACTERISTICS Percent of Rated Peak Reverse Voltage (%) Ratings at 25℃Fig. ambient temperature unless otherwise specified. 1 - Maximum Forward Current Derating Curve Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% 100 0.040(1.0) 0.024(0.6) TA = 125 °C 0.001 125 Temperature (°C) ELECTRICAL MAXIMUM Lead RATINGS AND 10 0.031(0.8) Typ. Method 2026 4 0.012(0.3) Typ. superimposed on rated load (JEDEC method) A 0.4 0.6 Operating Temperature0 Range 0.2 TJ0.8 Instantaneous Forward Voltage (V) Storage Temperature Range TSTG 40 120 CJ Typical Junction Capacitance (Note 1) 0.01 RΘJA Typical Thermal Resistance (Note 2) 1.0 -55 to +125 Amps Amps ℃/W PF -55 to +150 ℃ - 65 to +175 ℃ Fig. 3 - Tpical Instantaneous Forward Characteristics CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT VF Maximum Forward Voltage at 1.0A DC Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage @T A=125℃ IR 0.50 0.70 0.85 0.5 10 0.9 0.92 Volts mAmps NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 2014-03 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. WILLAS FM120-M+ THRU MBR10100AULPS 10.0A SCHOTTKY BARRIER RECTIFIERS 100V FM1200-M+ 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V TO-277A PACKAGE Pb Free Product SOD-123+ PACKAGE Features • Batch process design, excellent power dissipation offers Package outline better reverse leakage current and thermal resistance. SOD-123H Ordering Information: profile surface mounted application in order to • Low optimize board space. Device PN Packing 0.146(3.7) efficiency. • Low power loss, high 0.130(3.3) (1) (2) 0.012(0.3) Typ. capability, low forward voltage drop. • High current MBR10100AULPS ‐T G ‐WS Tape&Reel: 5 Kpcs/Reel • High surge capability. Note: (1) Packing code, Tape & Reel Packing • Guardring for overvoltage protection. 0.071(1.8) switching. • Ultra high-speed (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” 0.056(1.4) • Silicon epitaxial planar chip, metal silicon junction. parts meet environmental standards of • Lead-free MIL-STD-19500 /228 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Mechanical data 0.040(1.0) 0.024(0.6) • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 Dimensions in inches and (millimeters) • Polarity : Indicated by cathode band ***Disclaimer*** • Mounting Position : Any • Weight : Approximated 0.011 gram WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. changes. WILLAS or anyone on its behalf assumes no responsibility or liability Single phase half wave, 60Hz, resistive of inductive load. for any errors or inaccuracies. Data sheet specifications and its information For capacitive load, derate current by 20% contained are intended to provide a product description only. "Typical" parameters SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT RATINGS Marking Code which may be included on WILLAS data sheets and/ or specifications can 12 13 14 15 16 18 10 115 120 20 30 40 50 60 80 100 150 200 Maximum Recurrent Peak Reverse Voltage Volts VRRM and do vary in different applications and actual performance may vary over time. Volts 14 21 28 35 42 56 70 105 140 Maximum RMS Voltage VRMS Volts Maximum DC Blocking Voltage 20 30 40 50 60 80 100 150 200 VDC WILLAS does not assume any liability arising out of the application or Amps Maximum Average Forward Rectified Current 1.0 use of any product or circuit. IO Peak Forward Surge Current 8.3 ms single half sine-wave 30 IFSM Amps superimposed on rated load (JEDEC method) ℃/W 40 Typical ThermalWILLAS products are not designed, intended or authorized for use in medical, Resistance (Note 2) RΘJA PF 120 Typical Junctionlife‐saving implant or other applications intended for life‐sustaining or other related Capacitance (Note 1) CJ -55 to +125 -55 to +150 Operating Temperature Range TJ ℃ applications where a failure or malfunction of component or circuitry may directly - 65 to +175 Storage Temperature Range TSTG ℃ or indirectly cause injury or threaten a life without expressed written approval CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT of WILLAS. Customers using or selling WILLAS components for use in Volts 0.9 Maximum Forward Voltage at 1.0A DC 0.92 VF 0.50 0.70 0.85 0.5 Maximum Average Reverse Current at @T A=25℃ such applications do so at their own risk and shall agree to fully indemnify WILLAS IR mAmps 10 @T A=125℃ Rated DC Blocking Voltage Inc and its subsidiaries harmless against all claims, damages and expenditures. NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 2014-03 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP.