WILLAS FM120-M+ 10.0A SCHOTTKY BARRIER RECTIFIERS 45V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V TO-277B PACKAGE THRU MBR1045ULPS FM1200-M+ Pb Free Product SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. Features • • • • • • • Low power loss, high efficiency. Ultra Low Forward Voltage Drop • High current capability, low forward voltage drop. Current Capability High surge capability. • High Lead Free Finish/RoHS 1) overvoltageCompliant(Note protection. • Guardring for meets ULswitching. 94 V-0 flammability rating Ultra high-speed • Epoxy Silicon epitaxial planarLevel chip, metal silicon junction. • Moisture Sensitivity 1 Lead-free parts meet environmental standards of •Pb-Free package is available 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) Halogen free product for packing code suffix “H” Mechanical data 0.040(1.0) 0.024(0.6) ďϭ • Epoxy : UL94-V0 rated flame retardant o 2 : Molded plastic, SOD-123H • • Case Operating Temperature:-55 C to +150oC 0.031(0.8) Typ. 0.031(0.8) Typ. 3 , o o Ğ ďϮ C to +150per C MIL-STD-750 • • Terminals Storage Temperature:-55 :Plated terminals, solderable 1 Method 2026 Device Maximum Maximum Maximum ďϭ Dimensions in inches and (millimeters) • Polarity : Indicated by cathode band Marking Recurrent RMS DC P• aMounting r t N u mPosition ber Voltage Blocking : Any Peak Reverse Voltage Voltage • Weight : Approximated 0.011 gram MBR1045ULPS 1045UL 45V 31.5V 45V Ϯ MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ϯ ϭ Ratings at 25℃ ambient temperature unless otherwise specified. > Single phase half wave, 60Hz, resistive of inductive load. Ϯ For capacitive load, derate current by 20% SYMBOL FM120-MH FM130-MH FM140-MH RATINGS FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT Marking Code 12 13 14 15 16 18 10 115 120 Ϯ Electrical Specified 20 30 40 50 60 80 100 150 200 Maximum RecurrentCharacteristics Peak Reverse Voltage @ 25°C Unless Volts VRRM Otherwise Volts Average Forward IF(AV) 10A VRMS 21 28 35 42 56 70 105 140 T14L = 90°C Maximum RMS Voltage Current Volts Maximum DC Blocking Voltage 20 30 40 50 60 80 100t 150 200 VDC Peak Forward Surge I 275A 8.3ms, half sine FSMCurrent Amps Maximum Average Forward Rectified IO 1.0 Current PIN 2 PIN 3 Peak Forward Surge Current 8.3 ms single half sine-wave PIN 1 HEAT SINK 30 IFSM Amps Min. Typ. Max. superimposed on rated load (JEDEC method) ℃/W 40 Typical Thermal Resistance (Note 2) --- 0.33V RΘJA --IF=2A Forward Voltage o --- 0.38V C--IF=5A PF TJ=25 C 120 INCHES MM Typical Junction Capacitance (NoteV1)F J --- 0.43V 0.47V IF=10A-55 to +125 -55 to +150 Operating Temperature Range TJ ℃ A .039 .047 1.00 1.20 --- 0.22VTSTG --IF=2A A2 .006 .017 0.15 0.43 65 to +175 Storage Temperature Range ℃ b1 .030 .041 0.75 1.05 --- 0.28V --IF=5A TJ=125oC b2 .065 .077 1.65 1.95 --- 0.39V 0.42V IF=10A D .148 .169 3.75 4.30 FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH o D2 .110 .126 2.80 3.20 ----120uA VR=36 J=25 C T Reverse Current Volts Maximum Forward Voltage at 1.0A DC 0.92 E 0.70 .250 .264 0.856.35 6.70 0.9 VF 0.50 e .065 .077 1.65 1.95 o R @T--0.5 Maximum Average Reverse CurrentIat A=25℃--0.25mA R=45 V J =25 C T E1 .207 .228 5.25 5.80 IR mAmps --100mA VR=45 E2 .12010 .142 3.05 3.60 @T--A=125℃ Rated DC Blocking Voltage TJ=125oC L .028 .051 0.70 1.30 W .031 .056 0.80 1.42 MIL-STD-19500 /228 RoHS product for for packing code suffix product packing code"G" suffix ”G” •RoHS Halogen free product for packing code suffix "H" TO-277B Maximum Ratings NOTES: Maximum thermal Resistance 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. RșJC 2- Thermal Resistance From Junction to Ambient 8.0 ć/W Notes: 1. High Temperature Solder Exemption Applied, see EU Directive Annex 7. 2012-06 2013-05 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. WILLAS FM120-M+ THRU MBR1045ULPS FM1200-M+ 10.0A SCHOTTKY BARRIER RECTIFIERS 45V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V TO-277B PACKAGE Pb Free Product SOD-123+ PACKAGE Package outline Features RATING AND CHARACTERISTIC CUEVESoffers design, excellent power dissipation • Batch process better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. • 100,00 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) CAPACITANCE (pF) IF, AVERAGE FORWARD CURRENT (A) Low power loss, high efficiency. • 12 • High current capability, low forward voltage drop. • High surge capability. 10 • Guardring for overvoltage protection. • Ultra high-speed switching. epitaxial planar chip, metal silicon junction. • Silicon 8 • Lead-free parts meet environmental standards of MIL-STD-19500 /228 RoHS product for packing code suffix "G" 6 Halogen free product for packing code suffix "H" Mechanical data 4 • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , 2 • Terminals :Plated terminals, solderable per MIL-STD-750 1,000 0.040(1.0) 0.024(0.6) 100 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 0 • Polarity : 50 Indicated band 25 75by cathode 100 125 Lead Temperature (°C) : Any • Mounting Position • Weight : Approximated 0.011 gram 150 1 Dimensions in inches and (millimeters) 0.1 1 10 VR, DC REVERSE VOLTAGE (V) 175 100 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT Marking Code Maximum Recurrent Peak Reverse Voltage VRRM 12 20 13 30 Maximum RMS Voltage VRMS 14 21 = 150°C20 30 IR, INSTANTANEOUS REVERSE CURRENT (µA) 1000,000 TJ VDC Maximum DC Blocking Voltage 100,000 Maximum Average Forward Rectified Current 10,000 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 1000 Resistance (Note 2) Typical Thermal IO TJ = 125°C IFSM T J =75°C RΘJA CJ Typical Junction Capacitance (Note 1) 100 Operating Temperature Range T TJJ=25°C Storage Temperature Range Figure 2 Typical Junction Capacitance TSTG 10 CHARACTERISTICS Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage 0.1 NOTES: 14 40 100 28 15 50 16 60 18 80 10 100 115 150 120 200 Volts 35 42 56 70 105 140 Volts 40 50 60 80 100 150 200 Volts 10 TA = 150°C 1.0 30 Amps T A =125°C TA =85°C 1 Amps 40 120 0.1 -55 to +125 PF -55 to +150 - 65 to +175 T 0.01 ℃/W ℃ T A =25°C ℃ A = -55°C SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT VF Maximum Forward Voltage at 1.0A DC 1.0 IF, INSTANTANEOUS FORWARD CURRENT (A) Ratings at 25℃ ambient temperature unless otherwise specified. Figure 1 Forward Current Derating Curve Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% @T A=125℃ IR 0 5 10 15 20 25 30 35 40 45 VR, INSTANTANEOUS REVERSE VOLTAGE (V) 0.50 0.001 0.70 0.85 0.9 0.5 0.0001 0 10 0.15 0.3 0.45 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) 0.92 Volts mAmps 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient Figure 3 Typical Reverse Characteristics 2012-06 2013-05 Figure 4 Typical Forward Characteristics WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. WILLAS FM120-M+ 10.0A SCHOTTKY BARRIER RECTIFIERS 45V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V TO-277B PACKAGE THRU MBR1045ULPS FM1200-M+ Pb Free Product SOD-123+ PACKAGE Features • Batch process design, excellent power dissipation offers Package outline better reverse leakage current and thermal resistance. SOD-123H profile surface mounted application in order to • Low Ordering Information: optimize board space. Device PN Packing 0.146(3.7) efficiency. • Low power loss, high 0.130(3.3) 0.012(0.3) Typ. (1 ) (2) capability, low forward • High current MBR1045ULPS‐T G voltage ‐WS drop. Tape&Reel: 5 Kpcs/Reel • High surge capability. Note: (1) for Packing code, Tape & Reel overvoltage protection. • Guardring 0.071(1.8) switching. • Ultra high-speed (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” 0.056(1.4) • Silicon epitaxial planar chip, metal silicon junction. parts meet environmental standards of • Lead-free MIL-STD-19500 /228 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.040(1.0) 0.024(0.6) 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 Dimensions in inches and (millimeters) • Polarity : Indicated by cathode band • Mounting Position : Any ***Disclaimer*** • Weight : Approximated 0.011 gram WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. changes. WILLAS or anyone on its behalf assumes no responsibility or liability Single phase half wave, 60Hz, resistive of inductive load. For capacitivefor any errors or inaccuracies. Data sheet specifications and its information load, derate current by 20% contained are intended to provide a product description only. "Typical" parameters SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT RATINGS 12 13 14 15 16 18 10 115 120 which may be included on WILLAS data sheets and/ or specifications can 20 30 40 50 60 80 100 150 200 Maximum Recurrent Peak Reverse Voltage Volts VRRM and do vary in different applications and actual performance may vary over time. Volts 14 21 28 35 42 56 70 105 140 Maximum RMS Voltage VRMS Volts Maximum DC Blocking Voltage 20 30 40 50 60 80 100 150 200 V DC WILLAS does not assume any liability arising out of the application or Amps Maximum Average Forward Rectified Current IO 1.0 use of any product or circuit. Peak Forward Surge Current 8.3 ms single half sine-wave 30 IFSM Amps superimposed on rated load (JEDEC method) ℃/W WILLAS products are not designed, intended or authorized for use in medical, 40 Typical Thermal Resistance (Note 2) RΘJA PF 120 Typical Junction Capacitance (Note 1) CJ life‐saving implant or other applications intended for life‐sustaining or other related -55 to +125 -55 to +150 Operating Temperature Range TJ ℃ - 65 to +175 applications where a failure or malfunction of component or circuitry may directly Storage Temperature Range TSTG ℃ or indirectly cause injury or threaten a life without expressed written approval CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT Volts 0.9 Maximum Forward Voltage at 1.0A DC 0.92 VF 0.50 0.70 0.85 of WILLAS. Customers using or selling WILLAS components for use in 0.5 Maximum Average Reverse Current at @T A=25℃ IR mAmps such applications do so at their own risk and shall agree to fully indemnify WILLAS 10 @T A=125℃ Rated DC Blocking Voltage Inc and its subsidiaries harmless against all claims, damages and expenditures. Marking Code NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 2013-05 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP.