4 Pad Ceramic Crystal, 1.6 mm x 1.2 mm Product Feature: ILCX20 Series Applications: Low Cost SMD Package Ultra-Miniature Package Compatible with Leadfree Processing RoHS Compliant Fibre Channel Server & Storage Sonet /SDH 802.11 / Wifi T1/E1,T3/E3 1.6±0.1 MARKING (TOP VIEW) 24 MHz to 60 MHz Frequency 1.2±0.1 CASE LID 0.30 MAX ESR (Equivalent Series Resistance) 0.50 150 Max. 100 Max. 24.0 MHz – 39.9 MHz 40.0 MHz – 60.0 MHz 1 2* 4* 3 0.30 0.45 5.0 pF Max. Shunt Capacitance (C0) Frequency Tolerance @ 25 C Frequency Stability over Temperature 30 ppm Standard (see Part Number Guide for more options) 50 ppm Standard (see Part Number Guide for more options) Crystal Cut AT Cut Load Capacitance 8 pF Standard Drive Level 100 µW Max. Aging 3 ppm Max. / Year Standard 0.55 *PIN 2 AND 4 ARE INTERNALLY CONNECTED TO CASE LID AND SHOULD BE CONNECTED TO GROUND. 1.05 0.85 0.55 Temperature 0.65 Operating -10 C to +60 C (see Part Number Guide for more options) Storage -40 C to +85 C Part Number Guide Package ILCX20 - Sample Part Number: RECOMMEND LAND PATTERN DIMENSION IN mm ILCX20 - FB1F8 - 20.000 Tolerance (ppm) at Room Temperature Stability (ppm) over Operating Temperature Operating Temperature Range B = ±50 ppm B = ±50 ppm 0 = 0°C to +50°C F = ±30 ppm F = ±30 ppm 1 = 0°C to +70°C G = ±25 ppm G = ±25 ppm 2 = -10°C to +60°C H = ±20 ppm H = ±20 ppm 3 = -20°C to +70°C I = ±15 ppm I = ±15 ppm** 5 = -40°C to +85°C J = ±10 ppm* J = ±10 ppm** 9 = -10°C to +50°C Mode (overtone) F = Fundamental Load Capacitance (pF) 18 pF Standard Or Specify Frequency - 20.000 MHz * Not available at all frequencies ** Not availablefor all temperature ranges ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev 05/06/16_B Page 1 of 2 4 Pad Ceramic Crystal, 1.6 mm x 1.2 mm Pb Free Solder Reflow Profile: ILCX20 Series Typical Application: *Units are backward compatible with 240C reflow processes Package Information: MSL = 1 Termination = e4 (Au over Ni over W base metal). Tape and Reel Information: Quantity per Reel A B C D E F 3000 8.0 ±0.3 4.0 ±0.2 3.5 ±0.2 9.0±1.0 or 12.0 ±3.0 60 / 80 180 Environmental Specifications: Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking: Line 1: I-Date Code (yww) Line 2: XXXX PROPRIETARY AND CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev 05/06/16_B Page 2 of 2