1.6 mm x 2.0 mm SMD Oscillator ISM20 Series Product Feature: Applications: Ultra-miniature Package Tristate function available RoHS Compliant Compatible with Leadfree Processing Fibre Channel Server & Storage Sonet / SDH 802.11 / WiFi T1/E1, T3/E3 Frequency 1.000 MHz to 80.000 MHz Frequency Stability (Note 1) See Part Number Guide Supply Voltage ±5% (Vcc) See Part Number Guide Supply Current 4.0 mA Output Levels Logic “0” Logic “1” CMOS Less than 10% of Supply Voltage Greater than 90% of Supply Voltage Symmetry (50% of waveform) See Part Number Guide Rise / Fall Time (20% to 80%) 6 nSec max Output Load See Part Number Guide Load 15pF Start Up Time 10 mSec max Temperature Range Operating Temperature Storage See Part Number Guide -55ºC to + 125ºC Voh = 70% of Vdd min or No Connection to Enable Tri-state Function (H) Output Vol = 30% of Vdd max or grounded to Disable Output (High Impedance) Notes 1. Inclusive of Temperature Range, Load, Voltage and Aging. 2. A 0.01 uF bypass capacitor is recommend between VCC (Pin 4) and GND (Pin 2) to minimize power supply noise. Part Number Guide Input Package Voltage 1 = +1.80 6 = +2.50 ISM20 3 = +3.30 Operating Temperature 1 = 0ºC to +70ºC 3 = -20ºC to +70ºC 2 = -40ºC to +85ºC Symmetry (Duty Cycle) 5 = 45/55 6 = 40/60 Sample Part Number: Stability Output (in ppm) 3 = 15 pF F = ±20 A = ±25 B = ±50 C = ±100 ISM20-363BH-20.0000M Pin 1 Select H = Enable 0 = N/C Frequency 20.0000MHz Package Information: MSL = 1 (package does not contain plastic; storage life is unlimited under normal room conditions. Termination = e4 (Au over Ni over W base metallization.) ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev: 10/12/15_A Page 1 of 2 1.6 mm x 2.0 mm SMD Oscillator ISM20 Series Pb Free Solder Reflow Profile: Typical Circuit: Vcc C1 0.01 uF Output 3 4 Oscillator Tri-state or No Connection 1 2 Units are backward compatible with 240C reflow processes Tape and Reel Information: Quantity per Reel A B C D E F 3000 8.0 ±0.3 4.0 ±0.2 3.5 ±0.2 9.0 ±0.1 or 12.0 ±0.3 60 / 80 180 Environmental Specifications: Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking: Line 1: ILSI, Date Code (YWW) Line 2: Frequency PROPRIETARY AND CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev: 10/12/15_A Page 2 of 2