^^ϯϯsϯ THRU ^^ϯϭϮs dƌĂŶƐŝĞŶƚsŽůƚĂŐĞ^ƵƉƉƌĞƐƐŽƌƐĨŽƌ^WƌŽƚĞĐƚŝŽŶ PRIMARY CHARACTERISTICS PPK 350W VRWM 5V IPP 24A VF 1.25V TJ,Max 125℃ SOD-323 PACKAGE 0DUNLQJ&RGH Please refer to the specification ([6(6'=9 =' FEATURES APPLICATIONS Small Body Outline Dimensions 350 Watts peak pulse power (tp = Cellular Phone Handsets and Accessories 8/20μs) Microprocessor based equipment Transient protection for data lines to Personal Digital Assistants(PDA’S) Small package for use in portable Notebooks, Desktops, and Servers electronics Portable Instrumentation Suitable replacement for MLV’s in Pagers Peripherals ESD protection applications Complies with the following standards Protects one I/O or power line IEC61000-4-2 Low clamping voltage Level 4 15 kV (air discharge) Low leakage current Solid-state silicon-avalanche MIL STD 883E - Method 3015-7 Class 3 technology 25 kV HBM (Human Body Model) 8 kV(contact discharge) GENERAL DESCRIPTION The SESD3Z series is designed to protect voltage sensitive components from ESD and transient voltage events. Excellent clamping capability, low leakage, and fast response time, make these parts ideal for ESD protection on designs where board space is at a premium. 2015.0ϵ www.willas.com.tw Rev.,d0Ϯ ^^ϯϯsϯ THRU ^^ϯϭϮs dƌĂŶƐŝĞŶƚsŽůƚĂŐĞ^ƵƉƉƌĞƐƐŽƌƐĨŽƌ^WƌŽƚĞĐƚŝŽŶ Electrical Parameter Symbol Parameter IPP Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP VRWM IR IT VBR Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM Test Current Breakdown Voltage @ IT IF Forward Current VF Forward Voltage @ IF Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. VBR Part Numbers Min Typ VF Max IT VRWM IR Max. C IF Typ. (Note1) 0DUNLQJ V V V mA V µA V mA pF SESD3Z3V3 5.0 6.0 7.0 1.0 3.3 1 1.25 200 35 ZD SESD3Z5V 6.1 6.7 7.2 1.0 5.0 1 1.25 200 30 5V SESD3Z12V 13.3 14.0 14.7 1.0 12.0 1 1.25 200 25 6U 1、Capacitance is measured at f=1MHz, VR=0V,TA=25℃. Fig.1 Non-Repetitive Peak Pulse Power vs. Pulse Time 2015.0ϵ www.willas.com.tw Rev.,d0Ϯ ^^ϯϯsϯ THRU ^^ϯϭϮs dƌĂŶƐŝĞŶƚsŽůƚĂŐĞ^ƵƉƉƌĞƐƐŽƌƐĨŽƌ^WƌŽƚĞĐƚŝŽŶ Fig.2 Power Derating Curve Fig.4 Clamping Voltage vs. Peak Pulse Current Fig.6 2015.0ϵ Fig.3 Waveform Fig.5 Capacitance vs. Reverse Voltage Forward Voltage vs. Forward Current www.willas.com.tw Rev.,d0Ϯ ^^ϯϯsϯ THRU ^^ϯϭϮs dƌĂŶƐŝĞŶƚsŽůƚĂŐĞ^ƵƉƉƌĞƐƐŽƌƐĨŽƌ^WƌŽƚĞĐƚŝŽŶ Outline Drawing SOD-323 .075(1.90) .059(1.50) .045(1.15) .010(0.25) .016(0.40) .091(2.30) .057(1.45) .106(2.70) .043(1.10) .031(0.80) .004(0.10)MAX. .008(0.20) .004(0.10) .016(0.40) .010(0.25) .010(0.25)MIN. Dimensions in inches and (millimeters) 2015.0ϵ www.willas.com.tw Rev.C Rev.,d0Ϯ dƌĂŶƐŝĞŶƚsŽůƚĂŐĞ^ƵƉƉƌĞƐƐŽƌƐĨŽƌ^WƌŽƚĞĐƚŝŽŶ Suggested Soldering Pad Layout ^^ϯϯsϯ THRU ^^ϯϭϮs SOD-323 .057(1.45) .033(0.83) .027(0.70) Dimensions in inches and (millimeters) 2015.0ϵ www.willas.com.tw RevA Rev.,d0Ϯ ^^ϯϯsϯ THRU ^^ϯϭϮs dƌĂŶƐŝĞŶƚsŽůƚĂŐĞ^ƵƉƉƌĞƐƐŽƌƐĨŽƌ^WƌŽƚĞĐƚŝŽŶ Reel Taping Specification - Surface Mount Device/SOD-323 PACKAGE PER REEL EA REEL DIA (m/m) PER BOX EA PER CARTION EA SOD-323 3000 178 30000 240,000 2015.0ϵ www.willas.com.tw Rev.,d0Ϯ dƌĂŶƐŝĞŶƚsŽůƚĂŐĞ^ƵƉƉƌĞƐƐŽƌƐĨŽƌ^WƌŽƚĞĐƚŝŽŶ ^^ϯϯsϯ THRU ^^ϯϭϮs Ordering Information: Device PN Part Number ‐T(1)G(2)‐WS Note: (1) Packing code, Tape & Reel Packing Tape&Reel: 3 Kpcs/Reel (2) RoHS product for packing code suffix ”G”;Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life‐saving implant or other applications intended for life‐sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.0ϵ www.willas.com.tw Rev.,d0Ϯ