SESD1ZxxV(SOD 123)

SESD1ZxxV
Transient Voltage Suppressors for ESD Protection
General Description
Features
The SESD1Z SERIES is designed to protect
z
Small Body Outline Dimensions
voltage sensitive components from ESD and transient
z
600 Watts peak pulse power (tp = 8/20μs)
voltage events. Excellent clamping capability, low
z
Transient protection for data lines to
leakage, and fast response time, make these parts
z
Small package for use in portable electronics
ideal for ESD protection on designs where board space
z
Suitable replacement for MLV’s in ESD
protection applications
is at a premium.
Applications
z
Protects one I/O or power line
z
Low clamping voltage
z
Cellular Phone Handsets and Accessories
z
Low leakage current
z
Microprocessor based equipment
z
Solid-state silicon-avalanche technology
z
Personal Digital Assistants(PDA’S)
z
Notebooks, Desktops, and Servers
Complies with the following standards
z
Portable Instrumentation
IEC61000-4-2
z
Pagers Peripherals
Level 4
z
Pb-Free package is available
RoHS product for packing code suffix ”G”
Halogen free product for packing code suffix “H”
MIL STD 883E - Method 3015-7 Class 3
z
15 kV (air discharge)
8 kV(contact discharge)
25 kV HBM (Human Body Model)
Moisture Sensitivity Level 1
Functional diagram
PIN CONFIGURATIONS
SOD-123
Absolute Ratings (Tamb=25°C )
Symbol
Value
Units
600
W
8
kV
260
°C
Storage Temperature Range
-55 to +150
°C
TJ
Maximum junction temperature
-55 to +125
°C
IPP
Maximum Reverse Peak Pulse Current
24
A
PPK
Peak Pulse Power (tp = 8/20μs)
VESD
ESD Voltage(HBM Waveform per IEC 61000-4-2)
TL
TSTG
2014-01
Parameter
Maximum lead temperature for soldering during 10s
WILLAS ELECTRONIC CORP.
SESD1ZxxV
Transient Voltage Suppressors for ESD Protection
Electrical Parameter
Symbol
Parameter
IPP
Maximum Reverse Peak Pulse Current
VC
Clamping Voltage @ IPP
VRWM
IR
IT
VBR
Working Peak Reverse Voltage
Maximum Reverse Leakage Current @
VRWM
Test Current
Breakdown Voltage @ IT
IF
Forward Current
VF
Forward Voltage @ IF
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
VBR
Min
Typ
VF
Max
IT
VRWM
IR
Max.
C
IF
Typ.
(Note1)
Part Numbers
V
V
V
mA
V
µA
V
mA
pF
SESD1Z5V
6.1
6.7
7.2
1.0
5.0
1
1.25
200
430
SESD1Z12V
13.3
14.0
14.7
1.0
12.0
1
1.25
200
300
1. Capacitance is measured at f=1MHz, VR=0V,TA=25℃.
Fig.1 Non-Repetitive Peak Pulse Power vs. Pulse Time
2014-01
WILLAS ELECTRONIC CORP.
SESD1ZxxV
Transient Voltage Suppressors for ESD Protection
Fig.2
Power Derating Curve
Fig.4 Clamping Voltage vs. Peak Pulse Current
Fig.6
2014-01
Fig.3
Waveform
Fig.5 Capacitance vs. Reverse Voltage
Forward Voltage vs. Forward Current
WILLAS ELECTRONIC CORP.
SESD1ZxxV
Transient Voltage Suppressors for ESD Protection
SOD-123 Mechanical Data
.071(1.80)
.055(1.40)
.018(0.45)
.039(1.00)
.154(3.90)
.130(3.30)
.114(2.90)
.098(2.50)
.053(1.35)
.027(0.70)
.004(0.1)MAX.
.008(0.20)MAX.
.016(0.40)MIN.
.018(0.45)
.010(0.25)
Dimensions in inches and (millimeters)
Marking
Type number
2014-01
Marking code
SESD1Z5V
15
SESD1Z12V
112
WILLAS ELECTRONIC CORP.
SESD1ZxxV
Transient Voltage Suppressors for ESD Protection
Ordering Information: Device PN Part Number ‐T(1)G(2)‐WS Note: (1) Packing code, Tape & Reel Packing Tape&Reel: 3 Kpcs/Reel (2) RoHS product for packing code suffix ”G”;Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life‐saving implant or other applications intended for life‐sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2014-01
WILLAS ELECTRONIC CORP.