Low Phase Noise OCXO Metal Package, 26 mm x 26 mm I426 Series Product Features: Applications: Very Low Phase Noise Option Low Power Consumption Voltage Control High Stability Telecommunications Data Communications Instrumentation Test and Measurement Frequency 10.000 MHz Output Level Sinewave (Into 50Ω, ±5%) +5 dBm Min., +7 dBm typ., +9 dBm Max. Supply Voltage +12.0 Vdc, ±5% Output Load 50 ohms ±5% Harmonics (Into 50Ω, ±5%) -25 dBc typ. Frequency Stability ±30.0 ppb (-40°C to +85°C) Frequency Vs Aging ±0.5 ppb (per day after 30 days of continuous operation) st ±0.1 ppm (1 year) ±0.5 ppm (10 year) ±0.1 ppm with Vc = +2.00 VDC Initial Accuracy @ 25°C 4.0 Watts Typ. 1.5 Watts Typ. Current @ 25 C (Start Up) Current @ 25 C (Steady State) Voltage Control (Vc) EFC Swing Pullability Input Impedance Linearity (Slope =Positive) Phase Noise (dBc/Hz) 0.0 VDC Min., +2.0 VDC typ., +4.0 VDC Max. ±0.5ppm Min. 100K Ω Min. 10% Typ. Option A B C D 1Hz 10Hz 100Hz 1kHz 10kHz 100kHz - 80 -115 -145 -150 -155 -155 Operating -40 C to +85 C Storage -55 C to +125 C Part Number Guide Package I426 - 90 -120 -148 -155 -160 -160 - 95 -125 -152 -160 -165 -165 -100 -130 -152 -160 -165 -165 Sample Part Number: E -100 -130 -152 -160 -170 -170 I426D-92AXV-10.000 MHz Phase Noise Option (see table above) Input Voltage Operating Temperature Frequency Stability (in ppb) Voltage Control Frequency Output (Phase Noise Option) - 9 = +12..0V 2= -40 C to +85 C A = Sine X = 30 V = Controlled -10.000 MHz ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev: 01/21/16_A Page 1 of 2 Low Phase Noise OCXO Metal Package, 26 mm x 26 mm I426 Series Pb Free Solder Reflow Profile: Typical Application: *Units are backward compatible with 240C reflow processes Package Information: MSL = N.A. (package does not contain plastic; storage life is unlimited under normal room conditions). Termination = e1 (Sn / Cu / Ag over Ni over Kovar base metal). Environmental Specifications Shock Vibration MIL-STD-202G, Method 213, Condition C MIL-STD-202G, Method 204, Condition A Marking Line 1: ILSI and Date Code Line 2: X-XXXXX (Part Number detail = I426X-XXXXX-Freq.) Line 2: Frequency PROPRIETARY AND CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev: 01/21/16_A Page 2 of 2