Leaded Oscillator, OCXO Metal Package, 25.7 mm X 25.7 mm I416 Series Product Features: Applications: Low Phase Noise Low Power Consumption Voltage Control High Stability Telecommunications Data Communications Instrumentation Test and Measurement Frequency 10.000 MHz- 30.000 MHz Output Level Sine +7dBm Min., 9dBm Max. Output Load 50 ohms Harmonics -50 dBc Spurious -80 dBC Frequency Stability See Frequency Stability Table Supply Voltage See Voltage Table (±5%) Current (Warm Up) Current @ 25 C (Steady State) 125 mA Max. 50 mA Voltage Control Voltage Range Pullability Deviation Slope (Positive) Hysteresis (retrace after 30min.) 0.0 VDC Min., 10.0 VDC Max. * ±3.0PPM* 10% ± 20.0 ppb Allan Variance (1s) 2.00E-11 Phase Noise - 90 dBc/Hz @ 1Hz -120 dBc/Hz @ 10Hz -145 dBc/Hz @ 100Hz -155 dBc/Hz @ 1kHz -165 dBc/Hz @ 10kHz -165 dBc/Hz @ 100kHz Operating See Operating Temperature Table in Part Number Guide Storage -40 C to +85 C Part Number Guide Package I416 - Sample Part Number: I416-5AA3V-10.000 MHz Input Voltage Operating Temperature Output Frequency Stability (in ppm) Voltage Control 5 = 5.0V 7 = 0 C to +50 C A = Sine Y = 0.5 V = Controled 9 = 12.0V 1 = 0 C to +70 C 1 = 0.25 F = Fixed 6 = -10 C to +75 C 2 = 0.1 3 = -20 C to +70 C 3 = 0.05 Frequency -10.000 MHz A= -30 C to +70 C *Input voltage dependant. ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 5/11 Specifications subject to change without notice Page 1 Leaded Oscillator, OCXO Metal Package, 25.7 mm X 25.7 mm I416 Series Pb Free Solder Reflow Profile: Typical Application: *Units are backward compatible with 240C reflow processes Package Information: MSL = N.A. (package does not contain plastic, storage life is unlimited under normal room conditions). Termination = e1 (Sn / Cu / Ag over Ni over Kovar base metal). Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking Line 1: ILSI and Date Code Line 2: XXXXXX (Part Number detail = I416-XXXXXX-Freq.) Line 2: Frequency ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 5/11 Specifications subject to change without notice Page 2