1.6 x 2.0 mm Ceramic Package TCXO / VCTCXO Product Feature: I589 / I789 Series Applications: High precision GPS support Voltage Control Option (I789 Series) Excellent Phase Noise Low Power Consumption RoHS Compliant / Pd Free Frequency Standard Frequencies Frequency Tolerance at +25ºC ±2ºC Frequency Stability vs. Temperature vs. Voltage vs. Load vs. Time Output Waveform Output Level Harmonics Load Supply Voltage (Vdd) Supply Current Start Up Time Frequency Drift Phase Noise (Typ) Storage Temperature Range Mobile GPS terminals Smartphones Wireless Base Stations Sonet / SDH T1/E1, T3/E3 13.000000 MHz to 52.000000 MHz 16.368, 16.369, 19.200, 26.000, 27.456, 38.400, and 52.000 MHz ±2.0 ppm max after second reflow See Part Number Guide ±0.1 ppm max for a ±5% change in Vdd ±0.2 ppm max for a ±5% change in Load ±1.0 ppm per year max Clipped Sine wave 0.8 V p-p min -5 dBc 10 kΩ // 10pF See Part Number Guide 2.0 mA max 5.0 mSec max 80 ppb within 20 seconds of startup 2.5 ppb per second max from 20 to 600 seconds 100 ppb max over first 600 seconds -83 dBc /Hz max @ 10 Hz -104 dBc/Hz max @ 100 Hz -130 dBc /Hz max @ 1 kHz -145 dBc/Hz max @ 10 kHz -147 dBc/Hz max @ 100 kHz -40ºC to +85ºC Voltage Control Option Pin 1 (I789 Series Only) Control Voltage Center and Range Vdd = +3.30 Vdd Vc = +1.65 VDC ±1.50 VDC Vdd = +2.70 Vdd Vc = +1.35 VDC ±1.25 VDC Vdd = +1.80 Vdd Vc = +0.90 VDC ±0.80 VDC Frequency Control Range ±8 ppm min, ±13 ppm max Slope Positive Part Number Guide: Package I589 Series = TCXO Input Voltage Operating Temperature 1 = +1.80 VDC 2 = +2.70 VDC 3 = +3.30 VDC 1 = 0° to +70°C 3 = -20ºC to +70ºC 5 = -30ºC to +85ºC I789 Series = VCTCXO Sample Part Number: Frequency Stability vs. Temperature (in ppm) Y = ±0.5 N = ±1.0 0 = ±1.5 P = ±2.0 I589-15Y-26.0000MHz Frequency -Frequency Notes: Not all options are available at all frequencies and temperatures ranges. Please consult with sales department for any other parameters or options. Oscillator specification subject to change without notice. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev: 02/10/16_A Page 1 of 3 1.6 x 2.0 mm Ceramic Package TCXO / VCTCXO I589 / I789 Series Pb Free Solder Reflow Profile: Units are backward compatible with +240ºC reflow processes Ts max to TL (Ramp-up Rate) Preheat Temperature min (Ts min) Temperature typ (Ts typ) Temperature max (Ts max) Time (Ts) Ramp-up Tate (TL to Tp Time Maintained Above Temperature (TL) Time (TL) Peak Temperature (Tp) Time within 5ºC to Peak Temperature (Tp) Ramp-down Rate Tune 25ºC to Peak Temperature Moisture Sensitivity Level (MSL) 3ºC / second max 150ºC 175ºC 200ºC 60 to180 seconds 3ºC / second max 217ºC 60 to 150 seconds 260ºC max for seconds 20 to 40 seconds 6ºC / second max 8 minute max Level 1 Circuit Configuration: Notes: It is recommended that a 0.01 µF bypass capacitor be connected between Vdd (Pin 4) and Ground (Pin 2) to minimize power supply noise. It is recommended that an external 0.01 µF AC-coupling capacitor be connected to output (Pin 3) of the device. For the TCXO (I598) Pin 1 should not be left floating but must be connected to ground. Environmental Specifications: Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev: 02/10/16_A Page 2 of 3 1.6 x 2.0 mm Ceramic Package TCXO / VCTCXO I589 / I789 Series Tape and Reel Information: PIN 1 LOCATION ON DEVICE PITCH MARKING TAPE WIDTH DIRECTION OF FEED REEL DIA PITCH TAPE WIDTH REEL DIA QTY PER REEL 4.00 8.00 180 1000 330 3000 Package Information: MSL = 1 Marking: Line 1 = XXXXX (Lot code) Dot to denote Pin 1 location PROPRIETARY AND CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev: 02/10/16_A Page 3 of 3