BAV21(DO 35)

WILLAS
FM120-M+
THRU
BAV21
0mA SMALL SIGNAL SWITCHING DIODE - V
1.0A SURFACE MOUNT SCHOTTKY
DO-35
PACKAGE
BARRIER
RECTIFIERS -20V- 200V
SOD-123+ PACKAGE
FM1200-M+
Pb Free Product
Package outline
Features
• Batch process design, excellent power dissipation offers
better reverse leakage current and thermal resistance.
SOD-123H
• Low profile surface mounted application in order to
optimize board space.
BAV21 SIGNAL DIODE
• Low power loss, high efficiency.
• High current capability, low forward voltage drop.
Absolute
Maximum
Ratings (Ta=25°C)
capability.
• High surge
Dimensions (DO-35)
Ratings Unit
Items
Symbol
protection.
• Guardring for overvoltage
switching.
• Ultra high-speed
Reverse
Voltag
VRRM
250
V
epitaxial planartrchip, metal50
silicon junction.
• SiliconRecovery
Reverse
ns
• Lead-free parts meet environmental standards of
Time
1.02(26.0)
MIL-STD-19500 /228
MIN.
Power
Dissipation
mW
product for packingPcode suffix500
"G"
• RoHS
(25
C)
3.33mW/
C
°
° free product
Halogen
for packing code suffix "H"
Forward
Current data
IF
250
mA
Mechanical
Junction
Temp.
Tj
-55
to
150
.153(3.6)
°C
• Epoxy : UL94-V0 rated flame retardant
.132(3.0)
Tstg -55 to 150 °C
2SHUDWLQJ6WRUDJH
• Case : Molded plastic, SOD-123H
0.031(0.8) Typ.
,
• Terminals :Plated terminals, solderable per MIL-STD-750
Mechanical Data
0.146(3.7)
0.130(3.3)
0.071(1.8)
0.056(1.4)
.022(0.55)
.018(0.45)
0.040(1.0)
0.024(0.6)
0.031(0.8) Typ.
.087(2.2)
.067(1.7)
Method 2026
Items
Materials
• Polarity : Indicated
by cathode band
Package
DO-35
Mounting
Position
:
Any sealed glass
•
Case
Hermetically
Lead/Finish
Double
stud/Solder
Plating
• Weight : Approximated 0.011 gram
Chip
Glass Passivated
0.012(0.3) Typ.
1 . 0Dimensions
2(26.0)
in inches and (millimeters)
MIN.
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Moisture Sensitivity Level 1
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase half wave, 60Hz, resistive of inductive load.
Electrical Characteristics (Ta=25°C)
For capacitive load, derate current by 20%
Polarity: Color band denotes cathode end
Ratings
Symbol
Ratings
Unit
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UN
RATINGS
Breakdown Voltage
BV
V
Marking Code
12
13
14
15
16 250 18
10
115
120
IR= 100uA
20
30
40
50
60
80
100
150
200
Maximum Recurrent Peak Reverse Voltage
Volt
VRRM
Peak Forward Surge Current PW= 1sec.
IFsurge
1.0
A
Volt
14
21
28
35
42
56
70
105
140
Maximum RMS Voltage
V
RMS
Maximum Forward Voltage
VF
V
Volt
Maximum
DC100mA
Blocking Voltage
20
30
40
50
60 1.0 80
100
150
200
VDC
IF=
Am
Maximum
Average Reverse
Forward Rectified
Current
IO
1.0
Maximum
Current
IR
uA
VR=1 50V
0.10
Peak Forward Surge Current 8.3 ms single half sine-wave
3015
IFSM
Am
VR=150V,Tj= 100°C
superimposed on rated load (JEDEC method)
Maximum Junction Capacitance
Cj
pF
℃/W
40
Typical Thermal Resistance (Note 2)
RΘJA
VR= 0, f= 1 MHz
1.5
PF
120
Typical Junction Capacitance (Note 1)
CJ
Max Reverse Recovery Time
trr
-55 to +125
-55 to +150ns
Operating Temperature Range
TJ
℃
IF=IR= 30mA, VR= 6V, iR= 3mA,RL= 100 Ω
50
- 65 to +175
Storage Temperature Range
TSTG
℃
CHARACTERISTICS
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNI
VF
Maximum Forward Voltage at 1.0A DC
Maximum Average Reverse Current at @T A=25℃
Rated DC Blocking Voltage
@T A=125℃
IR
0.50
0.70
0.85
0.5
10
NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Thermal Resistance From Junction to Ambient
2010-03
WILLAS ELECTRONIC CORP.
0.9
0.92
Vol
mAm
WILLAS
FM120-M+
THRU
BAV21
0mA SMALL SIGNAL SWITCHING DIODE - V
1.0A SURFACE MOUNT SCHOTTKY
BARRIER
RECTIFIERS -20V- 200V
DO-35
PACKAGE
FM1200-M+
Pb Free Product
SOD-123+ PACKAGE
Package outline
Features
• Batch process design, excellent power dissipation offers
RITING AND CHARACTERISTIC CURVES (BAV21)
better reverse leakage current and thermal resistance.
• Low profile surface mounted application in order to
SOD-123H
Characteristics
(Tj = 25_C unless otherwise specified)
• Low power loss, high efficiency.
optimize board space.
IF – Forward Current ( mA )
MIL-STD-19500
/228
10
• RoHS product for packing code suffix "G"
Halogen free product for packing code suffix "H"
1
Mechanical
data
• Epoxy : UL94-V0 rated flame retardant
VR = VRRM
0.1 : Molded plastic, SOD-123H
• Case
,
• Terminals :Plated terminals, solderable per MIL-STD-750
0.01
0.012(0.3) Typ.
1000
m
I R – Reverse Current ( A )
• High current capability, low forward voltage drop.
1000 surge capability.
• High
• Guardring for overvoltage protection.
• Ultra high-speed switching.
100
• Silicon epitaxial planar chip, metal silicon junction.
parts meet environmental standards of
• Lead-free Scattering
Limit
0.146(3.7)
0.130(3.3)
Method 2026
0.071(1.8)
0.056(1.4)
Tj = 25°C
100
Scattering Limit
10
0.040(1.0)
0.024(0.6)
1
0.031(0.8) Typ.
0.031(0.8) Typ.
0.1
200
0 : Indicated
40
0 Dimensions
0.4
1.6
in 0.8
inches and1.2
(millimeters)
• Polarity
by 80
cathode120
band 160
T
–
Junction
Temperature
(
°C
)
V
–
Forward
Voltage
(
V
)
: Any
• Mounting Position
j
F
• Weight : Approximated 0.011 gram
Figure 1. Reverse Current vs.
Figure 2. Forward Current vs.
Junction Temperature
Forward Voltage
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
2.0
rf – Differential Forward Resistance (
W)
Ratings at1000
25℃ ambient temperature unless otherwise specified.
Single phase half wave, 60Hz, resistive of inductive load.
For capacitive load, derate current by 20%
RATINGS
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT
100
Marking Code
Maximum Recurrent Peak Reverse Voltage
VRRM
12
20
13
30
14
40
15
50
16
60
18
80
10
100
115
150
120
200
Volts
Maximum RMS Voltage
VRMS
14
21
28
35
42
56
70
105
140
Volts
20
30
40
50
60
80
100
150
200
Volts
Tj = 25°C
Maximum DC Blocking Voltage
VDC
10
Maximum Average Forward Rectified Current
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IO
IFSM
1 1)
Typical Junction0.1
Capacitance (Note
10
CJ
Operating Temperature Range
IF – Forward Current ( mA ) TJ
Storage Temperature Range
100
40
120
-55 to +125
Amps
Amps
℃/W
PF
-55 to +150
℃
- 65 to +175
TSTG
Figure 3. Differential Forward Resistance vs.
Forward Current
CHARACTERISTICS
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH
VF
Maximum Forward Voltage at 1.0A DC
Maximum Average Reverse Current at @T A=25℃
Rated DC Blocking Voltage
2010-03
@T A=125℃
NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
RΘJA
1 Resistance (Note 2)
Typical Thermal
1.0
30
2- Thermal Resistance From Junction to Ambient
IR
0.50
0.70
0.85
0.9
0.5
10
WILLAS ELECTRONIC CORP.
0.92
℃
UNIT
Volts
mAmps
WILLAS
FM120-M+
THRU
BAV21
0mA SMALL SIGNAL SWITCHING DIODE - V
DO-35
PACKAGE
1.0A SURFACE MOUNT SCHOTTKY
BARRIER
RECTIFIERS -20V- 200V
SOD-123+ PACKAGE
FM1200-M+
Pb Free Product
Package outline
Features
• Batch process design, excellent power dissipation offers
better reverse leakage current and thermal resistance.
SOD-123H
• Low profile surface mounted application in order to
optimize board space.
0.146(3.7)
high efficiency.
• Low power loss,
Ordering
Information:
0.130(3.3)
• High current capability, low forward voltage drop.
Device PN Packing • High surge capability.
(1) (2)
overvoltage
protection.
• Guardring for
BAS21‐T G ‐WS Tape&Reel: 3 Kpcs/Reel • Ultra high-speed switching.
Note: (1)
Packing code, Tape&Reel Packing
planar chip, metal silicon junction.
• Silicon epitaxial
parts
meet
environmental standards of
• Lead-free
(2) RoHS product for packing code suffix ”G”;Halogen free product for packing code suffix “H” 0.012(0.3) Typ.
0.071(1.8)
0.056(1.4)
MIL-STD-19500 /228
• RoHS product for packing code suffix "G"
free product for packing code suffix "H"
Halogen
Mechanical data
• Epoxy : UL94-V0 rated flame retardant
• Case : Molded plastic, SOD-123H
,
• Terminals :Plated terminals, solderable per MIL-STD-750
0.040(1.0)
0.024(0.6)
0.031(0.8) Typ.
0.031(0.8) Typ.
Method 2026
• Polarity : Indicated by cathode band
• Mounting Position : Any
• Weight : Approximated 0.011 gram
Dimensions in inches and (millimeters)
***Disclaimer*** WILLAS reserves the right to make changes without notice to any product MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
specification herein, to make corrections, modifications, enhancements or other Ratings at 25℃ ambient temperature unless otherwise specified.
changes. WILLAS or anyone on its behalf assumes no responsibility or liability Single phase half wave, 60Hz, resistive of inductive load.
load, derate current by 20%
for any errors or inaccuracies. Data sheet specifications and its information For capacitive
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UN
RATINGS
contained are intended to provide a product description only. "Typical" parameters Marking Code
12
13
14
15
16
18
10
115
120
which may be included on WILLAS data sheets and/ or specifications can 20
30
40
50
60
80
100
150
200
Maximum Recurrent
Peak Reverse Voltage
Volt
VRRM
Volt
14
21
28
35
42
56
70
105
140
Maximum RMS
Voltage
VRMS
and do vary in different applications and actual performance may vary over time. Volt
Maximum DC Blocking Voltage
20
30
40
50
60
80
100
150
200
VDC
WILLAS does not assume any liability arising out of the application or Am
Maximum Average Forward Rectified Current
IO
1.0
use of any product or circuit. Peak Forward Surge Current 8.3 ms single half sine-wave
30
IFSM
Am
on rated load (JEDEC method)
superimposed
℃/W
40
Typical Thermal
Resistance (Note 2)
RΘJA
WILLAS products are not designed, intended or authorized for use in medical, PF
120
Typical Junction Capacitance (Note 1)
CJ
life‐saving implant or other applications intended for life‐sustaining or other related -55 to +125
-55 to +150
Operating Temperature
Range
TJ
℃
65
to
+175
Storage Temperature
Range
TSTG
℃
applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval CHARACTERISTICS
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNI
Volt
0.9
Maximum Forward Voltage at 1.0A DC
0.92
VF
0.50
0.70
0.85
of WILLAS. Customers using or selling WILLAS components for use in 0.5
Maximum Average Reverse Current at @T A=25℃
IR
mAm
such applications do so at their own risk and shall agree to fully indemnify WILLAS 10
@T A=125℃
Rated DC Blocking
Voltage
Inc and its subsidiaries harmless against all claims, damages and expenditures. NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Thermal Resistance From Junction to Ambient
2010-03
2012-06
WILLAS ELECTRONIC CORP.
WILLAS ELECTRONIC CORP.