NH35

PRODUCT DATASHEET
Asia Pacific Region
+852‐31026623
ENERGIZER NH35-2500
Specifications
Industry Standard Dimensions
(millimeters)
Classification:
Chemical System:
Rechargeable
Nickel-Metal Hydride (NiMH)
Designation:
Nominal Voltage:
Rated Capacity:
IEC-HR14
1.2 Volts
2500 mAh (to 1.0 volts)
Based on 500 mA (0.2C) discharge rate
Typical Weight:
Typical Volume:
Jacket:
60.0 grams
26.9 cubic centimeters
Plastic Label
C
Internal Resistance:
26.20
24.90
1.50
Minimum
7.50
Maximum
The internal resistance of the cell varies
with state of charge, as follows:
Cell Charged
Cell 1/2 Discharged
11 milliohms
21 milliohms
(tolerance of ±20% applies to above values)
50.00
48.50
AC Impedance (No Load):
The impedance of the charged cell varies
with frequency, as follows:
13.0
Minimum
Frequency (Hz)
Typical Discharge Characteristics
1000
Typical Performance at 21ºC
1.4
Cell Voltage
1.3
500 mA
(0.2C)
1.1
1.0
Above values based on AC current set at 1.0 ampere.
Value tolerances are ±20%.
250 mA
(0.1C)
1.2
Operating and Storage Temperatures:
To maintain maximum performance, observe the following
general guidelines regarding environmental conditions.
0.9
0
3
6
Hours of Discharge
9
12
Typical Performance at 21ºC
1.4
Cell Voltage
Impedance (milliohms)
(Charged Cell)
9
1.3
1.2
1.1
2.5 A
(1.0C)
5.0 A
(2.0C)
1.0
0.9
0.0
0.5
1.0
1.5
Hours of Discharge
0ºC to 40ºC
0ºC to 50ºC
-20ºC to 30ºC
65±20%
Operating at extreme temperatures,
will significantly impact battery cycle life.
1.25 A
(0.5C)
2.0
Charge:
Discharge:
Storage:
Humidity:
2.5
Important Notice
This datasheet contains typical information specific to products manufactured at the time of its publication.
©Energizer Holdings, Inc. - Contents herein do not constitute a warranty.
Form No. EBC - 8920AP
Page 1 of 1