RE12

PRODUCT DATASHEET
Asia Pacific Region
+852‐31026623
EVEREADY RE12-700
AAA
Specifications
Industry Standard Dimensions
Classification:
Chemical System:
Rechargeable
Nickel-Metal Hydride (NiMH)
Designation:
Nominal Voltage:
Rated Capacity:
IEC-HR03
1.2 Volts
700 mAh (to 1.0 volts)
Based on 140 mA (0.2C) discharge rate
Typical Weight:
Typical Volume:
Jacket:
12.0 grams
3.8 cubic centimeters
Plastic Label
(millimeters)
10.50
9.50
0.80
Minimum
3.80
Maximum
Internal Resistance:
The internal resistance of the cell varies
with state of charge, as follows:
44.50
43.30
Cell Charged
Cell 1/2 Discharged
100 milliohms
120 milliohms
(tolerance of ±20% applies to above values)
AC Impedance (No Load):
4.30
Minimum
The impedance of the charged cell varies
with frequency, as follows:
Frequency (Hz)
Typical Discharge Characteristics
1000
Typical Performance at 21ºC
Cell Voltage
1.4
Above values based on AC current set at 1.0 ampere.
Value tolerances are ±20%.
1.3
70 mA
(0.1C)
1.2
140 mA
(0.2C)
1.1
Operating and Storage Temperatures:
1.0
To maintain maximum performance, observe the following
general guidelines regarding environmental conditions.
0.9
0
3
6
Hours of Discharge
9
12
Typical Performance at 21ºC
1.4
Cell Voltage
Impedance (milliohms)
(Charged Cell)
35
1.3
1.2
1.1
1.4 A
(2.0C)
1.0
0.7 A
(1.0C)
Charge: 0ºC to 40ºC
Discharge: 0ºC to 50ºC
Storage: -20ºC to 30ºC
Humidity: 65±20%
Operating at extreme temperatures,
will significantly impact battery cycle life.
0.35 A
(0.5C)
0.9
0.0
0.5
1.0
1.5
Hours of Discharge
2.0
2.5
Important Notice
This datasheet contains typical information specific to products manufactured at the time of its publication.
©Energizer Holdings, Inc. - Contents herein do not constitute a warranty.
Form No. EBC - 8958AP
Page 1 of 1