RE15

PRODUCT DATASHEET
Asia Pacific Region
+852‐31026623
EVEREADY RE15-2000
AA
Specifications
Industry Standard Dimensions
Classification:
Chemical System:
Rechargeable
Nickel-Metal Hydride (NiMH)
Designation:
Nominal Voltage:
Rated Capacity:
IEC-HR6
1.2 Volts
2000 mAh (to 1.0 volts)
Based on 400 mA (0.2C) discharge rate
Typical Weight:
Typical Volume:
Jacket:
28.0 grams
8.3 cubic centimeters
Plastic Label
(millimeters)
14.50
13.50
1.00
Minimum
5.50
Maximum
Internal Resistance:
The internal resistance of the cell varies
with state of charge, as follows:
Cell 1/2 Discharged
Cell Charged
30 milliohms
40 milliohms
(tolerance of ±20% applies to above values)
50.50
49.20
AC Impedance (No Load):
7.00
Minimum
The impedance of the charged cell varies
with frequency, as follows:
Frequency (Hz)
Typical Discharge Characteristics
1000
Typical Performance at 21ºC
Cell Voltage
1.4
Above values based on AC current set at 1.0 ampere.
Value tolerances are ±20%.
1.3
200 mA
(0.1C)
1.2
400 mA
(0.2C)
1.1
Operating and Storage Temperatures:
1.0
To maintain maximum performance, observe the following
general guidelines regarding environmental conditions.
0.9
0
3
6
Hours of Discharge
9
12
Typical Performance at 21ºC
1.4
Cell Voltage
Impedance (milliohms)
(Charged Cell)
12
1.3
1.2
1.1
4.0 A
(2.0C)
1.0
2.0 A
(1.0C)
Charge: 0ºC to 40ºC
Discharge: 0ºC to 50ºC
Storage: -20ºC to 30ºC
Humidity: 65±20%
Operating at extreme temperatures,
will significantly impact battery cycle life.
1.0 A
(0.5C)
0.9
0.0
0.5
1.0
1.5
Hours of Discharge
2.0
2.5
Important Notice
This datasheet contains typical information specific to products manufactured at the time of its publication.
©Energizer Holdings, Inc. - Contents herein do not constitute a warranty.
Form No. EBC - 8957AP
Page 1 of 1