15KPA

15KPA17Ae3 – 15KPA280CAe3
Compliant
15,000 Watt Transient Voltage Suppressor
(TVS) Protection Device
DESCRIPTION
This device clamps dangerous high-voltage short-term transients such as those produced by
the secondary effects of lightning strikes, providing circuit protection to several class levels in
the IEC61000-4-5 specification. Clamping time is virtually instantaneous. It also provides
protection from transients caused by inductive load dumps, induced RFI, and ESD, providing
protection to IEC61000-4-2 and -4-4.
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
•
•
•
•
Available in both unidirectional and bidirectional configurations.
5% working voltage tolerance.
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B.
RoHS compliant (2002/95/EC), MSL level 1 (J-STD-020).
P600 Package
APPLICATIONS / BENEFITS
•
•
•
Protection from transients caused by lightning strikes, switching transients, RFI, and ESD.
Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4.
Protection from the secondary effects of lightning per IEC61000-4-5.
MAXIMUM RATINGS @ 25 ºC unless otherwise noted
Parameters/Test Conditions
Junction and Storage Temperature
Thermal Resistance, Junction to Lead @ 3/8 inch (10 mm)
lead length from body
Thermal Resistance, Junction to Ambient
(1)
Non Repetitive Peak Forward Surge Current
Rated Average Power Dissipation @ T L = 75 ºC,
(2)
(0.375 inch (9.5 mm) from body)
Peak Pulse Power Dissipation with a 10/1000 μs waveform
(see Figure 1)
(3)
Peak Pulse Current with a 10/1000 μs waveform
Solder Temperature @ 10 s
Symbol
Value
T J and
T STG
R ӨJL
-55 to +175
Unit
8.0
o
C/W
R ӨJA
I FSM
P M(AV)
77.5
400
8.0
o
C/W
A
W
P PP
15000
W
I PP
See
Electrical
Table
260
A
o
o
C
C
Notes: 1. For Unidirectional devices only. Measured on 8.3 ms single half sine-wave or equivalent square wave,
duty cycle = 4 pulses per minute maximum. Also see Figure 6.
2. Mounted as shown in Figure 5.
3. Non-repetitive current pulse, per Figure 3 and derated above T A = 25ºC per Figure 2.
RF01131, Rev. A (6/24/13)
©2013 Microsemi Corporation
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Page 1 of 7
15KPA17Ae3 – 15KPA280CAe3
MECHANICAL and PACKAGING
•
•
•
•
•
•
•
CASE: Epoxy body meets UL94V-0.
TERMINALS: Matte-tin plating, fully RoHS compliant. Solderable per MIL-STD-750, method 2026.
MARKING: Manufacturer ID, date code and part number.
POLARITY: For unidirectional types the color band denotes the cathode, which is positive with respect to the anode under normal
TVS operation.
TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
WEIGHT: Approximately 0.07 ounce (2.0 grams).
See Package Dimensions on last page.
PART NOMENCLATURE
15
K
P
A
17
C
A
Peak Pulse Power
e3
RoHS Compliance
Kilowatt Rating
5%Voltage Tolerance
Encapsulated Plastic
Package
Polarity
C = Bi-directional
Blank = Unidirectional
Axial-leaded Device
Stand-off Voltage Rating
(see Electrical Characteristics
table)
SYMBOLS & DEFINITIONS
Definition
Symbol
α V(BR)
VW M
PPP
V (BR)
ID
IPP
VC
Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in
temperature that caused it expressed in %/°C or mV/°C.
Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that
may be continuously applied over the standard operating temperature.
Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The
impulse power is the maximum-rated value of the product of I PP and V C .
Breakdown Voltage: The voltage across the device at a specified current I (BR) in the breakdown region.
Standby Current: The current through the device at rated stand-off voltage.
Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse
current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an
external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives.
Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an
impulse current (I PP ) for a specified waveform.
RF01131, Rev. A (6/24/13)
©2013 Microsemi Corporation
Page 2 of 7
15KPA17Ae3 – 15KPA280CAe3
ELECTRICAL CHARACTERISTICS @ 25 ºC
DEVICE
BREAKDOWN
VOLTAGE(2), V(BR)
V(BR) @ I (BR)
(Volts)
TEST
CURRENT
I (BR)
(mA)
STANDOFF
VOLTAGE
VWM
(Volts)
MAXIMUM
STANDBY
CURRENT(4)
ID @ VWM
(µA)
MAXIMUM
PEAK PULSE
CURRENT(3)
IPP
(A)
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
(Volts)
MAXIMUM
TEMPERATURE
COEFFICIENT
αV(BR)
(%/ °C)
15KPA17Ae3 / 15KPA17CAe3
Min
18.99
Max
20.79
50
17
5000
515.4
29.3
0.1
15KPA18Ae3 / 15KPA18CAe3
20.11
22.01
50
18
5000
488.7
30.9
0.1
15KPA20Ae3 / 15KPA20CAe3
22.34
24.46
20
20
1500
440.2
34.3
0.1
15KPA22Ae3 / 15KPA22CAe3
24.57
26.91
10
22
500
407.0
37.1
0.1
15KPA24Ae3 / 15KPA24CAe3
26.81
29.35
5
24
150
371.0
40.7
0.1
15KPA26Ae3 / 15KPA26CAe3
29.04
31.80
5
26
50
343.2
44.0
0.1
15KPA28Ae3 / 15KPA28CAe3
31.28
34.24
5
28
25
317.9
47.5
0.1
15KPA30Ae3 / 15KPA30CAe3
33.51
36.70
5
30
15
297.8
50.7
0.1
15KPA33Ae3 / 15KPA33CAe3
36.90
40.40
5
33
2
276.1
54.7
0.1
15KPA36Ae3 / 15KPA36CAe3
40.20
44.00
5
36
2
252.5
59.8
0.1
15KPA40Ae3 / 15KPA40CAe3
44.70
48.90
5
40
2
229.5
65.8
0.1
15KPA43Ae3 / 15KPA43CAe3
48.00
52.60
5
43
2
216.3
69.8
0.1
15KPA45Ae3 / 15KPA45CAe3
50.30
55.00
5
45
2
207.4
72.8
0.1
15KPA48Ae3 / 15KPA48CAe3
53.60
58.70
5
48
2
194.3
77.7
0.1
15KPA51Ae3 / 15KPA51CAe3
57.00
62.40
5
51
2
182.1
82.9
0.1
15KPA54Ae3 / 15KPA54CAe3
60.30
66.00
5
54
2
172.2
87.7
0.1
15KPA58Ae3 / 15KPA58CAe3
64.80
70.90
5
58
2
161.0
93.8
0.1
15KPA60Ae3 / 15KPA60CAe3
67.00
73.40
5
60
2
155.0
97.4
0.1
15KPA64Ae3 / 15KPA64CAe3
71.50
78.30
5
64
2
144.9
104.2
0.1
15KPA70Ae3 / 15KPA70CAe3
78.20
85.60
5
70
2
132.9
113.6
0.1
15KPA75Ae3 / 15KPA75CAe3
83.80
91.70
5
75
2
123.8
122.0
0.1
15KPA78Ae3 / 15KPA78CAe3
87.10
95.40
5
78
2
119.7
126.1
0.1
15KPA85Ae3 / 15KPA85CAe3
94.90
104.00
5
85
2
109.7
137.6
0.1
15KPA90Ae3 / 15KPA90CAe3
100.50
110.10
5
90
2
103.7
145.6
0.1
15KPA100Ae3 / 15KPA100CAe3
111.70
122.30
5
100
2
93.6
161.3
0.1
15KPA110Ae3 / 15KPA110CAe3
122.90
134.50
5
110
2
84.5
178.6
0.1
15KPA120Ae3 / 15KPA120CAe3
134.00
146.80
5
120
2
78.5
192.3
0.1
15KPA130Ae3 / 15KPA130CAe3
145.20
159.00
5
130
2
72.5
208.3
0.1
15KPA150Ae3 / 15KPA150CAe3
167.60
183.50
5
150
2
62.4
241.9
0.1
15KPA160Ae3 / 15KPA160CAe3
178.70
195.70
5
160
2
58.4
258.6
0.1
15KPA170Ae3 / 15KPA170CAe3
189.90
207.90
5
170
2
55.4
272.7
0.1
15KPA180Ae3 / 15KPA180CAe3
201.10
220.10
5
180
2
52.3
288.5
0.1
15KPA200Ae3 / 15KPA200CAe3
223.40
244.60
5
200
2
47.3
319.1
0.1
15KPA220Ae3 / 15KPA220CAe3
245.70
269.10
5
220
2
35.2
356.0
0.1
15KPA240Ae3 / 15KPA240CAe3
268.10
293.50
5
240
2
39.3
384.6
0.1
15KPA260Ae3 / 15KPA260CAe3
290.40
318.00
5
260
2
36.2
416.7
0.1
15KPA280Ae3 / 15KPA280CAe3
312.80
342.40
5
280
2
33.2
454.5
0.1
NOTES:
(1) All ratings at 25 ºC unless specified otherwise.
(2) V (BR) measured after I (BR) applied for 300 µs, I (BR) = square wave pulse or equivalent.
(3) Surge current waveform per Figure 3 and derated per Figure 2.
(4) For bidrectional types with V WM of 30 volts and less, the I D limit is doubled.
RF01131, Rev. A (6/24/13)
©2013 Microsemi Corporation
Page 3 of 7
15KPA17Ae3 – 15KPA280CAe3
PPP – Peak Pulse Power (kW)
GRAPHS
t d – Pulse Width (sec.)
Peak Pulse Power (PPP) or Current (lPP)
Derating in Percentage%
FIGURE 1
Peak Pulse Power Rating Curve
T A Ambient Temperature (°C)
FIGURE 2
Pulse Derating Curve
RF01131, Rev. A (6/24/13)
©2013 Microsemi Corporation
Page 4 of 7
15KPA17Ae3 – 15KPA280CAe3
Pulse Current in Percent of IPP
GRAPHS (continued)
t – Time – ms
Test waveform parameters: tr=10 µs, tp=1000 µs
CT, Total Capacitance (pF)
FIGURE 3
Pulse Waveform for 10/1000 Exponential Surge
V (BR) – Reverse Breakdown Voltage (V)
FIGURE 4
Typical Junction Capacitance
RF01131, Rev. A (6/24/13)
©2013 Microsemi Corporation
Page 5 of 7
15KPA17Ae3 – 15KPA280CAe3
PD Steady State Power Dissipation (W)
GRAPHS (continued)
T L – Lead Temperature (°C)
IFSM Peak Forward Surge Current (A)
FIGURE 5
Steady State Power Derating Curve
Number of Cycles at 60 Hz
FIGURE 6
Maximum Non-repetitive Forward Surge Current
(Unidirectional Devices Only)
RF01131, Rev. A (6/24/13)
©2013 Microsemi Corporation
Page 6 of 7
15KPA17Ae3 – 15KPA280CAe3
PACKAGE DIMENSIONS
Dim
LL
BL
BD
LD
RF01131, Rev. A (6/24/13)
©2013 Microsemi Corporation
Dimensions
Inch
Millimeters
Min
Max
Min
Max
0.750
19.05
0.340 0.360 8.645 9.135
0.340 0.360 8.645 9.135
0.047 0.053 1.194 1.346
Page 7 of 7