1N6469 thru 1N6476 Voidless-Hermetically-Sealed Unidirectional Transient Suppressors SCOTTSDALE DIVISION APPEARANCE This series of industry recognized voidless-hermetically-sealed Unidirectional Transient Voltage Suppressor (TVS) designs is military qualified to MIL-PRF19500/552 and are ideal for high-reliability applications where a failure cannot be tolerated. They provide a Working Peak “Standoff” Voltage selection from 5.0 to 51.6 Volts with 1500 W ratings. They are very robust in hard-glass construction and also use an internal metallurgical bond identified as Category I for high reliability applications. The 1500 W series is military qualified to MIL-PRF-19500/552. These devices are also available in a surface mount MELF package configuration by adding a “US” suffix (see separate data sheet for 1N6469US thru 1N6476AUS). Microsemi also offers numerous other TVS products to meet higher and lower peak pulse power and voltage ratings in both through-hole and surface-mount packages. “G” Package WWW . Microsemi .C OM DESCRIPTION IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES • • • • • • • APPLICATIONS / BENEFITS High surge current and peak pulse power provides transient voltage protection for sensitive circuits Triple-layer passivation Internal “Category I” metallurgical bonds Voidless hermetically sealed glass package JAN/TX/TXV military qualifications available per MILPRF-19500/552 by adding JAN, JANTX, or JANTXV prefix Further options for screening in accordance with MILPRF-19500 for JANS by using a “SP” prefix, e.g. SP6469, SP6476, etc. Surface Mount equivalents are also available in a square-end-cap MELF configuration with a “US” suffix (see separate data sheet) MAXIMUM RATINGS • • • • • • • • • Military and other high reliability transient protection Extremely robust construction Working Peak “Standoff” Voltage (VWM) from 5.0 to 51.6 V Available as 1500 W Peak Pulse Power (PPP) ESD and EFT protection per IEC61000-4-2 and IEC61000-4-4 respectively Secondary lightning protection per select levels in IEC61000-4-5 Flexible axial-leaded mounting terminals Nonsensitive to ESD per MIL-STD-750 Method 1020 Inherently radiation hard as described in Microsemi MicroNote 050 MECHANICAL AND PACKAGING • Operating & Storage Temperature: -55 C to +175 C • CASE: Hermetically sealed voidless hard glass with Tungsten slugs • Peak Pulse Power at 25oC: 1500 Watts @ 10/1000 µs (also see Figures 1,2 and 4) • TERMINATIONS: Axial-leads are Tin/Lead (Sn/Pb) over copper • Impulse repetition rate (duty factor): 0.01% • MARKING: Body painted and part number, etc. • Forward Surge Current: 130 Amps@ 8.33 ms one-half • POLARITY: Cathode band sine wave • Forward Voltage: 1.5 V @ 4 Amps dc and 4.8 V at • Tape & Reel option: Standard per EIA-296 100 Amps (pulsed) • Weight: 1270 mg • Steady-State Power: 3.0 W @ TA = 25oC (see note • See package dimensions on last page below and Figure 4) • Thermal Resistance @ 3/8 inch lead length: 50.0 oC/W o • Solder Temperatures: 260 C for 10 s (maximum) NOTE: Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where TJ(MAX) is not exceeded. o Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 1N6469 – 1N6476 Copyright © 2007 10-03-2007 REV C o 1N6469 thru 1N6476 Voidless-Hermetically-Sealed Unidirectional Transient Suppressors SCOTTSDALE DIVISION TYPE 1N6469 1N6470 1N6471 1N6472 1N6473 1N6474 1N6475 1N6476 Symbol VBR BREAK DOWN VOLTAGE V(BR) MIN. Volts 5.6 6.5 13.6 16.4 27.0 33.0 43.7 54.0 BREAKDOWN CURRENT I (BR) mAdc 50 50 10 10 5 1 1 1 WORKING PEAK VOLTAGE VWM MAX LEAKAGE CURRENT ID Vdc 5 6 12 15 24 30.5 40.3 51.6 μAdc 1500 1000 20 10 5 5 5 5 MAXIMUM CLAMPING VOLTAGE VC MAXIMUM PEAK PULSE CURRENT IPP @ 10/1000 µs V(pk) 9.0 11.0 22.6 26.5 41.4 47.5 63.5 78.5 @8/20 µs A(pk) 945 775 374 322 207 181 135 107 @10/1000 µs A(pk) 167 137 66 57 36.5 32 24 19 MAXIMUM TEMP. COEF. OF V(BR) o %/ C -.03, +0.04 0.06 0.085 0.085 .096 .098 .101 .103 WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS SYMBOLS & DEFINITIONS Definition Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Working Peak Voltage: The maximum peak voltage that can be applied over the operating temperature range. This is also referred to as Standoff Voltage. Maximum Standoff Current: The maximum current that will flow at the specified voltage and temperature. Maximum clamping voltage at specified IPP (Peak Pulse Current) at the specified pulse conditions. Peak Pulse Power: The peak power dissipation resulting from the peak impulse current IPP. VWM ID VC PPP FIG. 1 – Non-repetive peak pulse power rating curve NOTE: Peak power defined as peak voltage times peak current Copyright © 2007 10-03-2007 REV C Peak Value IPP Pulse time duration (tp) is defined as that point where IP decays to 50% of peak value (IPP). time (t) in milliseconds FIG. 2 Pulse wave form for exponential surge for 10/1000 µs Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 1N6469 – 1N6476 Pulse current (IP) in percent of IPP GRAPHS 1N6469 thru 1N6476 Voidless-Hermetically-Sealed Unidirectional Transient Suppressors WWW . Microsemi .C OM Peak Pulse Power (Ppp), Current (Ipp), and DC Power in Percent of 25oC Rating SCOTTSDALE DIVISION T – Temperature – oC FIGURE 3 8/20 µs CURRENT IMPULSE WAVEFORM FIGURE 4 DERATING CURVE PACKAGE DIMENSIONS Inches [mm] PACKAGE G Note: Package G lead dimension diameter is 0.040 inch nominal with –.003 +.002 inch tolerance 1N6469 – 1N6476 Copyright © 2007 10-03-2007 REV C Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3