STN6469 – STN6476 and Solid State Devices, Inc. STN6469SMS – STN6476SMS 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 1,500 WATTS PEAK PULSE POWER 5.6 – 54 VOLTS UNI-DIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ STN __ │ │ │ │ │ │ │ └ ___ __ │ │ │ │ └ └ Screening2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level Package __ = Axial SMS = SMS Voltage/Family 6469 = 5.6V 6470 = 6.5V 6471 = 13.0V 6472 = 16.4V 6473 = 27.0V 6474 = 33.0V 6475 = 43.7V 6476 = 54.0V FEATURES: • • • • • 5.6 to 54 Volts Uni-Directional Bi-Directional Available – Consult Factory Hermetic Glass Diode o 175 C Maximum Operating Temperature TX, TXV, and Space Level Screening Available 2/ Consult Factory • Replacement for 1N6469 – 1N6476 APPLICATIONS: • • • Voltage Sensitive Component Protection Protection Against Power Surges Lightning Protection MAXIMUM RATINGS Symbol Value Units VRRM VRSM VR 5.6 – 54.0 Volts Steady State Power Dissipation PD 6.0 Watts Peak Pulse Power @ 1.0 msec PPP 1500 Watts Top & Tstg -65 to +175 ºC RθJL RθJE 22 18 ºC/W Stand Off Voltage Operating and Storage Temperature Junction to Lead for Axial, L = 3/8” Junction to End Tab for Surface Mount Thermal Resistance AXIAL SMS NOTES: 1 For ordering information, price, operating curves, and availability – contact factory. 2 Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: T00031C DOC STN6469 – STN6476 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS (Note 1) PART NUMBER Standoff Voltage Maximum Reverse Leakage VSO IR @ VSO Reverse Breakdown Voltage Test Current Voltage (VBR) @ IT Max Clamping Voltage (VCL) @ Peak Pulse Current (IPP) (Note 3) IT VCL IPP Volts Amps Min Typical Temp. Coefficient of VBR Replacement JEDEC Part Numbers o (% / C) UNIPOLAR Volts uA Volts mA STN6469 5 5000 5.6 50 9.0 167 0.04 1N6469 STN6470 6 5000 6.5 50 11.0 137 0.04 1N6470 STN6471 12 1000 13.0 10 22.6 66 0.05 1N6471 STN6472 15 1000 16.4 10 26.5 57 0.06 1N6472 STN6473 24 100 27.0 5 41.4 36.5 .084 1N6473 STN6474 30.5 5 33.0 1 47.5 32 .093 1N6474 STN6475 40.3 5 43.7 1 63.5 24 .094 1N6475 STN6476 51.6 5 54.0 1 78.5 19 .096 1N6476 FIGURE 1 FIGURE 2 DIM A B C D DIMENSIONS MIN MAX 0.130” 0.165” 0.140” 0.160” 0.038” 0.042” 1.00” --- NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIM A B C D DIMENSIONS MIN MAX 0.172” 0.178” 0.180” 0.230” 0.020” 0.028” 0.001” --- DATA SHEET #: T00031C DOC