OPTO ■ Photocoupler PHOTOCOUPLER LINEUP Lineup <Phototransistor output type> Output type Single phototransistor Features Model No. (series) General purpose, High collector-emitter voltage Low input current AC input response Darlington phototransistor High sensitivity, High collector-emitter voltage Low input current Low input current Compact, Half pitch (lead space), SMT type Single phototransistor General purpose, High resistance to noise, etc. Single phototransistor 34 PC364NJ0000F 34 PC355NJ0000F / PC452J00000F 34 PC365NJ0000F 34 35 Low input current PC3H71xNIP0F 35 PC3H3J00000F / PC3H4J00000F 35 PC3H41xNIP0F 35 PC3H5J00000F 35 PC3H510NIP0F 35 Reinforced insulation PC123XNNSZ0F 36 Low input current General purpose, High collector-emitter voltage, etc. PC1231xNSZ0X 36 PC817XNNSZ0F / PC851XNNSZ0F 36 High sensitivity Low input current DIP type (6-pin) 34 PC354NJ0000F 35 Low input current (4-pin, DIP type) 34 PC367NJ0000F PC3H7J00000F Low input current DIP type (4-pin) PC357NJ0000F / PC451J00000F Reinforced insulation PC3HU7xYIP0B AC input response Darlington phototransistor Page PC8171xNSZ0X 36 Darlington phototransistor High sensitivity, High collector-emitter voltage PC815XNNSZ0F / PC852XNNSZ0F 36 Single phototransistor General purpose, High collector-emitter voltage, etc. PC7xxV0NSZXF▲ 37 Darlington phototransistor High sensitivity, High collector-emitter voltage, etc. PC7x5V0NSZXF▲ 37 <OPIC output type> Package type Compact, SMT type DIP type, SMT type Output type Features Model No. (series) Optoelectronics Package type Mini-flat 4-pin Compact, SMT type Page Digital output General purpose, High response speed PC400J00000F 38 Analog/Digital output High CMR PC457L0NIP0F 38 Digital output General purpose PC900V0NSZXF 39 Built-in base amplifier For inverter control PC925LENSZ0F 39 The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 33 OPTO PHOTOCOUPLERS ■ Photocouplers ♦Phototransistor Darlington phototransistor output Single phototransistor output Output type Output Type <Compact, SMT type> Model No. Internal connection diagram ○: Approved Approved by safety standards*2 Features UL (Ta = 25°C) Absolute maximum ratings Electro-optical characteristics Isolation Current transfer ratio Response time CollectorForward voltage emitter Package current (AC) tr voltage CTR RL VCE IC IF VCE Viso IF (µs) (%) VCEO (mA) (V) (mA) (Ω) (V) (mA) (rms) TYP. MIN. (V) (kV) PC357NJ0000F General purpose ○ 50 3.75 80 50 5 5 4 2 100 2 PC451J00000F High collector-emitter voltage ○ 50 3.75 350 40 5 5 4 2 100 2 PC367NJ0000F Low input current, high resistance to noise*1 ○ 10 3.75 80 100 0.5 5 4 2 100 2 PC354NJ0000F AC input response ○ ±50 3.75 80 20 ±1 5 4 2 100 2 ±10 3.75 80 50 ±0.5 5 4 2 100 2 Mini-flat 4-pin PC364NJ0000F Low input current, AC input response, high resistance to noise*1 ○ PC355NJ0000F High sensitivity ○ 50 3.75 35 600 1 2 60 2 100 2 PC365NJ0000F High sensitivity, low input current ○ 10 3.75 35 600 0.5 2 60 10 100 2 PC452J00000F High collector-emitter voltage ○ 50 3.75 350 1 000 1 2 100 20 100 2 *1 CMR: MIN. 10 kV/µs *2 Please refer to Specification Sheets for model numbers approved by safety standards. PC357NJ0000F (Mini-flat 4-pin) 34 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. OPTO PHOTOCOUPLERS ♦ Phototransistor *1 *2 *3 *4 *5 *6 Model No. Internal connection diagram Features ○: Approved Approved by safety standards*3 UL PC3HU7xYIP0B Reinforced insulation (internal insulation distance: MIN. 0.4 mm), low-profile package PC3H7J00000F Standard PC3H71xNIP0F ○ *4, 5 (Ta = 25°C) Absolute maximum ratings Electro-optical characteristics Isolation Current transfer CollectorResponse time Forward voltage ratio emitter Package current (AC) voltage CTR tr IF Viso IF VCE IC RL VCE VCEO (%) (µs) (mA) (rms) (mA) (V) (mA) (Ω) (V) (V) MIN. TYP. (kV) Lowprofile 50 3.75 80 50 5 5 4 2 100 2 mini-flat 4-pin ○ *6 50 2.5 80 20 1 5 4 2 100 2 High resistance to noise*1, low input current ○ 10 2.5 80 100 0.5 5 4 2 100 2 PC3H3J00000F AC input response, high resistance to noise*1 ○ ±50 2.5 80 20 ±1 5 4 2 100 2 PC3H4J00000F AC input response ○ *2, 6 ±50 2.5 80 20 ±1 5 4 2 100 2 PC3H41xNIP0F AC input response, high resistance to noise*1, low input current ○ ±10 2.5 80 50 ±0.5 5 4 2 100 2 PC3H5J00000F High sensitivity ○ 50 2.5 35 600 1 2 60 2 100 2 10 2.5 35 600 0.5 2 60 2 100 2 PC3H510NIP0F High sensitivity, low input current Mini-flat 4-pin Mini-flat 4-pin ○ CMR: MIN.10 kV/µs A VDE approved type is optionally available. Please refer to Specification Sheets for model numbers approved by safety standards. VDE, CSA approved In conformance with BSI, SEMKO, DEMKO, NEMKO, and FIMKO UL, cUL approved PC3HU7xYIP0B Optoelectronics Darlington phototransistor output Single phototransistor output Output type Output Type <Compact, half pitch (lead space) SMT type> PC3H7J00000F (Mini-flat 4-pin) Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 35 OPTO PHOTOCOUPLERS ♦ Phototransistor Darlington phototransistor output Single phototransistor output Output type Output Type <DIP type (4-pin)> Model No. Internal connection diagram ○: Approved (Ta = 25°C) Absolute maximum ratings Isolation CollectorForward Package current voltage emitter (AC) voltage Others IF UL VDE Viso (rms) VCEO *2 *3 (mA) (V) (kV) Approved by safety standards*8 Features Electro-optical characteristics Current transfer ratio Response time CTR (%) MIN. IF (mA) tr RL (µs) (Ω) TYP. PC123XNNSZ0F*1, *5, *6, *7 High isolation voltage, reinforced insulation ○ ○ ○ 50 5.0 70 50 5 4 100 PC1231xNSZ0X*1 High isolation voltage, reinforced insulation, low input current, high resistance to noise*4 ○ ○ ○ 10 5.0 70 50 0.5 4 100 PC817XNNSZ0F*5, *6, *7 High isolation voltage ○ – ○ *9 50 5.0 80 50 5 4 100 PC8171xNSZ0X*5, *6 High isolation voltage, low input current, high resistance to noise*4 ○ – – 10 5.0 80 100 0.5 4 100 PC851XNNSZ0F*5, *6 High isolation voltage, high collector-emitter voltage ○ – – 50 5.0 350 40 5 4 100 PC815XNNSZ0F*5, *6 High isolation voltage, high sensitivity ○ – – 50 5.0 35 600 1 60 100 PC852XNNSZ0F*5, *6 High isolation voltage, high collector-emitter voltage ○ ○ – 50 5.0 350 1 000 1 100 100 4-pin DIP *1 *2 *3 *4 *5 *6 *7 Wide lead spacing type is also available. Creepage distance: 6.4 mm or more, wide lead spacing type: 8 mm or more. Optionally available. BSI, SEMKO, DEMKO, NEMKO, FIMKO, CSA CMR: 10 kV/µs MIN. Lead forming type is also available for surface mounting. Taped package of lead forming type for surface mounting is also available. Wide lead spacing type is also available. Compatible with wide lead spacing type lead-forming models for surface-mount use. Also compatible with taped packages for wide lead spacing type lead-forming models for surface-mount use. *8 Please refer to Specification Sheets for model numbers approved by safety standards. *9 UL, CSA approved PC817XNNSZ0F (4-pin DIP) 36 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. OPTO PHOTOCOUPLERS ♦ Phototransistor Output type PC713V0NSZXF▲ Internal connection diagram ○: Approved Features High isolation voltage, with base terminal Approved by safety standards*2 UL VDE*1 ○ ○ (Ta = 25°C) Absolute maximum ratings Electro-optical characteristics Isolation Collector- Current transfer Response Forward ratio time Package current voltage emitter (AC) voltage CTR tr IF RL IF Viso (rms) VCEO (%) (mA) (µs) (Ω) (mA) (V) (kV) MIN. TYP. 50 5.0 80 50 5 4 100 6-pin DIP PC715V0NSZXF▲ High isolation voltage, high sensitivity ○ ○ 50 5.0 35 600 1 60 100 PC725V0NSZXF▲ High isolation voltage, high sensitivity, high collector-emitter voltage, high power ○ ○ 50 5.0 300 1 000 1 100 100 *1 Optionally available. *2 Please refer to Specification Sheets for model numbers approved by safety standards. The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Optoelectronics Darlington phototransistor output Model No. Single phototransistor output Output Type <DIP type (6-pin)> 37 OPTO PHOTOCOUPLERS “OPIC” (Optical IC) is a trademark of SHARP Corporation. An OPIC consists of a Output ( light-detecting element and signal-processing circuit integrated onto a single chip. ) ○: Approved <Compact, SMT type> (1-1) ♦OPIC Model No. PC400J00000F Internal connection diagram A (Ta = 25°C) Absolute maximum Electro-optical characteristics*1 ratings Isolation Low level output voltage Threshold input current Package Forward voltage current V OL IFHL IFLH (AC) IF RL Ta IOL IF (mA) (mA) UL VDE*3 Viso (rms) (V) (mA) (Ω) (mA) (°C) (mA) MAX. MAX. MAX. (kV) Approved by safety standards*2 Features Digital output, normal-off operation ○ – Mini-flat 5-pin 50 3.75 0.4 0 to +70 16 4 2.0 – 280 A: Rated voltage circuit *1 Each item is measured at Vcc=5V. (PC400) *2 Please refer to Specification Sheets for model numbers approved by safety standards. *3 Optionally available. <Compact, SMT type> (1-2) Model No. PC457L0NIP0F Internal connection diagram ○: Approved Approved by safety standards*1 Features High speed (1 Mb/s), high CMR (15 kV/µs), for flow soldering UL VDE*2 ○ ○ (Ta = 25°C) Absolute maximum Electro-optical characteristics ratings Isolation Current transfer ratio Propagation delay time Package Forward voltage current CTR tPHL tPLH (AC) VO VCC IF IF RL IF Viso (rms) (%) (mA) (V) (V) (µs) (µs) (Ω) (mA) (mA) MIN. TYP. TYP. (kV) Mini-flat 5-pin 25 3.75 19 16 0.4 4.5 0.2 0.4 1 900 16 *1 Please refer to Specification Sheets for model numbers approved by safety standards. *2 Optionally available. PC400J00000F (Mini-flat 5-pin) 38 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. OPTO PHOTOCOUPLERS “OPIC” (Optical IC) is a trademark of SHARP Corporation. An OPIC consists of a Output ( light-detecting element and signal-processing circuit integrated onto a single chip. ) ○: Approved <DIP type, digital output> ♦OPIC Model No. Internal connection diagram Features PC900V0NSZXF*2, *3 Digital output, normal-off operation A Absolute maximum ratings Approved by safety standards*5 UL ○ (Ta = 25°C) Electro-optical characteristics*1 Threshold input Isolation Low level output voltage Package Forward voltage current current (AC) VOL IFHL IFLH F I IF RL Ta IOL VDE Viso (rms) (V) (mA) (mA) *4 (mA) (mA) (mA) (Ω) (°C) (kV) MAX. MAX. MAX. ○ 6-pin DIP 50 5.0 0.4 0 to +70 16 4 2.0 – 280 A: Rated voltage circuit *1 Each item is measured at Vcc=5V. *2 Lead forming type is also available for surface mounting. *3 Taped package of lead forming type for surface mounting is also available. *4 Optionally available. *5 Please refer to Specification Sheets for model numbers approved by safety standards. PC900V0NSZXF (6-pin DIP) “OPIC” (Optical IC) is a trademark of SHARP Corporation. An OPIC consists of a Output ( light-detecting element and signal-processing circuit integrated onto a single chip. ) ○: Approved <DIP type, Gate drive type> Model No. Internal connection diagram PD Interface OPIC PC925LENSZ0F*1 Tr1 Tr2 Features • Built-in drive circuit directly connectable to MOS-FET and IGBT • Peak output current: 2.5 A • Low dissipation current (Icc = TYP. 2.5 mA) • High resistance to noise (CMR: MIN. 15 kV/µs) Approved by safety standards*3 UL VDE ○ ○ Package *2 8-pin DIP (Ta = 25°C) Absolute Electro-optical characteristics maximum ratings Isolation Propagation delay time Forward voltage current tPHL tPLH (AC) IF RL1 RL2 VCC IF Viso (rms) (µs) (µs) (V) (mA) (Ω) (Ω) (mA) TYP. TYP. (kV) 25 5.0 MAX. MAX. 15 to 0.5 0.5 30 7 to 16 RG = 10 Optoelectronics ♦OPIC – *1 Lead forming type is also available for surface mounting. Taped package of lead forming type for surface mounting is also available. *2 A VDE approved type is optionally available. *3 Please refer to Specification Sheets for model numbers approved by safety standards. PC925LENSZ0F (8-pin DIP) Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 39