FS1000 Series Fast Switching Synthesizer Supports hundreds of fast switching, high spectral purity applications. Description: Features: The Aeroflex FastSource 1000 RF source represents a milestone in Synthesizer development and reflects years of design experience in Fast Switching Synthesis. • <100 Microsecond switching Designed specifically to meet the needs of todays Telecommunications industry, this high speed source offers a cost effective solution without sacrificing performance. The source covers a frequency range of 4.5 MHz to 6.0 GHz with a switching speed of 100 Microseconds. Spurious levels are greater than -65 dBc and Phase noise at 1.0 GHz is greater than -130 dBc/Hz at 10 KHz offset. • Low phase noise -130 dBc/Hz • 2 Hz resolution • Low spurious • Dual configuration available Specifications: Phase Noise of External Reference: Frequency Range: 4.5 MHz to 6010 MHz Step Size: 2 Hz - 2000 MHz 2 Hz - 2000 to 4000 MHz 4 Hz - 4000 to 6010 MHz Power Output: +7 dBm Flatness: ±1.5 dB -130 -140 -143 -145 Offset 100 Hz 1 KHz 10 KHz 50 KHz Switching Time: <100 µ seconds to within 1.0 radian of final phase Output Isolation: 25 dB minimum between ports <5 microseconds switching time between ports VSWR: dBc/Hz 1.8:1 External Reference: 10 MHz, 3 dBm ±4 dB, 50 W Frequency Stability: Same as Reference Oscillator Noise Floor: 10 MHz OFFSET -140 dBc/Hz -145 dBz/Hz -147 dBc/Hz -138 dBc/Hz -134 dBc/Hz Frequency Range 4.5 to 180 MHz 180 to 1000 MHz 1000 to 2000 MHz 2000 to 4000 MHz 4000 to 6010 Reference Output: 10 MHz, +3 dBm ±2 dB, 50 W SIGNAL & CONTROL SOLUTIONS Revision Date: 8/21/2013 Phone: (732) 460-0212, Fax: (732) 460-0214 www.aeroflex.com/ascs, email: [email protected] FS1000 Series Fast Switching Synthesizer SIGNAL & CONTROL SOLUTIONS Specifications (con’t): Residual FM: Output Phase Noise: OFFSET <250 MHz .25 to <.5 GHz 0.5 to <1.0 GHz 1.0 to <2.0 GHz 2.0 to <4.0 GHz Residual FM 4.0 to <6.0 GHz Typ. Guar. Typ. Guar. Typ. Guar. Typ. Guar. Typ. Guar. Typ. Guar. 10 kHz -125 -122 -135 -132 -131 -127 -125 -122 -119 -116 -113 -110 20 kHz -127 -124 -137 -133 -133 -129 -127 -124 -121 -118 -115 -112 100 kHz -128 -125 -138 -134 -134 -130 -128 -123 -122 -118 -116 -113 <7 <16 < 32 Frequency Range 4 to 2000 MHz 2000 to 4000 MHz 4000 to 6010MHz Frequency Control: Parallel BCD positive or negative true with strobe. Strobe normally low, trigger on trailing edge Output Fault: Remote On/Off (RF): O MHz = Off On/Off Ratio <25 dBc Harmonics -25 dBc max. TTL level logic, “1” normal operation 4.5 to 6010 MHz Sub Harmonics: Logic Connector: 50 Pin receptacle, AMP 554216-3 -60 dBc, Typical -50 dBc Max except for components at FC noted below Initialization: Unit will initialize with RF Off @ FC=4.0 to 4.25, 5F/2 may be -45 dBc @ Offsets ≤±2.8 MHz from the carrier, spurs will be as follows: Random Vibration: 10 Hz to 300 Hz @ 1.2 G RMS Power: 105 to 125 VAC, 50-60 Hz FC <180 MHz: 180 MHz<FC<1.0 GHz 1.0 GHz<FC<2.0 GHz 2.0 GHz<FC<4.0 GHz 4.0 GHz<FC<6.01 GHz -60 -66 -60 -54 -48 Temperature Range: +10o to +45 oC dBc dBc dBc dBc dBc CONFIGURATION S = Single Synthesizer D = Dual, Two independent synthesizers in a common chassis For 1.0 GHz<FC <2 GHz, fixed spurs at the following frequencies may be -60 dBc: 1175, 1225, 1275, 1325, 1375, 1425, 1475, 1525, 1575 and 1625 MHz Spurious: dBc (maximum) -65 -60 -55 Frequency Range 4 to 2000 MHz 2000 to 4000 MHz 4000 to 6010MHz For FC less than 180 MHz a spur may exist between 1609 Mz and 1960 MHz at -35 dBc: A fixed 800 MHz spur may exist at -60 dBc all carrier frequencies Physical Dimensions: Dimensions: 16.75” W X 5.22” H X 23.86” D 2 Aeroflex Signal & Control Solutions www.aeroflex.com/ASCS • [email protected] Revision Date: 8/21/2013 FS1000 Series Fast Switching Synthesizer SIGNAL & CONTROL SOLUTIONS Programming Input (BCD Connector) SIGNAL PIN SIGNAL PIN Logic Ground 50 NC 25 400 MHz 49 Strobe 24 NC 48 NC 23 NC 47 NC 22 NC 46 Chassis Ground 21 Fault 45 8 MHz 20 200 MHz 44 4 MHz 19 100 MHz 43 2 MHz 18 NC 42 1 MHz 17 80 MHz 41 20 MHz 16 40 MHz 40 10 MHz 15 MUX 39 2 GHz 14 800 MHz 38 1 GHz 13 8 Hz 37 2 Hz 12 4 Hz 36 4 GHz 11 80 Hz 35 20 Hz 10 40 Hz 34 10 Hz 9 800 Hz 33 200 Hz 8 400 Hz 32 100 Hz 7 8 kHz 31 2 kHz 6 4 kHz 30 1 kHz 5 80 kHz 29 20 kHz 4 40 kHz 28 10 kHz 3 800 kHz 27 200 kHz 2 400 kHz 26 100 kHz 1 Note: Mating Connector is 3M P/N 3564-1001 (50 Pin Ribbon. Bail mount, Plug) 3 Aeroflex Signal & Control Solutions www.aeroflex.com/ASCS • [email protected] Revision Date: 8/21/2013 FS1000 Series Fast Switching Synthesizer SIGNAL & CONTROL SOLUTIONS Aeroflex Signal & Control Solutions Aeroflex Microelectronic Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Fax: (732) 460-0214 ISO 9001:2008 certified 35 South Service Rd Plainview, NY 11803 [USA} Fax: (516) 694-4823 Sales Phone: (732) 460-0212 [email protected] www.aeroflex.com/Microwave www.aeroflex.com/ASCS Aeroflex Control Componen. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2013 Aeroflex Signal & Control Solutions. All rights reserved. Revision Date: 8/21/2012 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.