S3L4/S3L4R

S3L4/S3L4R PIN Diode Switch
Single Pole, Three Throw
Absorptive/Reflective
Data Sheet Revision Date: 12/03/2015
The most important thing we build is trust
DESCRIPTION:
The S3 series of single pole, three throw PIN diode switches span the frequency
range of 10MHz to 18GHz and are available with absorptive or reflective inputs. The
switches are available in a wide variety of standard frequency ranges from costeffective narrowband to high-performance broadband.
Each switch incorporates a TTL-compatible driver for convenient system integration
and operates from +5V and -12V to -18V DC power supplies. All switches incorporate
DC blocks at the RF ports. Standard screened switches incorporate epoxy sealed lids
and undergo a stringent yet cost effective screening cycle.
The switches are also available with hermetic seal and high-rel screening for military
and aerospace applications.
SPECIFICATIONS:
Parameter
Absorptive
Reflective
Unit of Measure
1 – 10
1 – 10
GHz
Insertion Loss (max)
2.2
2.1
dB
VSWR (max) (50 ohms)
2.0
2.0
ratio
Isolation (min)
75
70
dB
Switching Speed (max)
100
100
nsec
CW RF Power, Survival
30
30
dBm
P1dB*
27
27
dBm
Frequency Range
*Standard bias configuration
OUTLINE DRAWING:
FEATURES:
0.40
0.20
0.40
0.15
TYP.
0.15
TYP.
1.20
1.000
0.10
0.10
+V
J1 -V
0.60
(2) PLCS.
G
E3
1.20 1.000
J4
J2
E1 SN:
0000
0.40
0.50
Ø0.020 X 0.15 LG
SOLDER PIN
(6) PLCS.
MODEL NUMBER
DC:
WWYY
J3
E2
SMA FEMALE
(4) PLCS.
Ø0.100 THRU
MOUNTING HOLE
(4) PLCS.
0.60
(2) PLCS.
0.38
REF
0.40
•
TTL-compatible drivers for convenient system
integration
•
Operates on +5V or +15V and -5V or -15V DC power
supplies (see ordering information)
•
DC blocks at all RF ports
•
Ruggedized construction
•
Hermetic versions available
•
All parts receive internal visual (per MIL-STD-883) and
temp cycle (-65 °C to +100 °C, 10 cycles)
•
Hi-Rel screening available upon request
•
30-day lead time on some configurations (contact
factory for details)
0.40
OUTLINE CASE STYLE S3
Revised Date: 12/03/2015
(732) 460-0212
www.cobham.com/CSCS
1
S3L4/S3L4R PIN Diode Switch
Single Pole, Three Throw, Absorptive/Reflective
NOTES:
ENVIRONMENTAL SPECIFICATIONS*:
DC Bias: (Standard) +5 V +/-0.5 V @ 120 mA max
-15 V +/-3 V @ 50 mA max
MIL-E-5400, MIL-STD-202, MIL-E-16400
DC Bias: (-5 option) +5 V +/-0.5 V @ 150 mA max
-5 V +/-0.5 V @ 60 mA max
Operating Temp:
-55 °C to +85 °C
Storage Temp:
-65 °C to +125 °C
DC Bias: (-12 option) +15 V +/-3 V @ 120 mA max
-15 V +/-3 V @ 50 mA max
Humidity: Shock: MIL-STD-202F, M103, Cond B
MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
Vibration: MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Control: TTL 0 = Low Loss E1 controls J2 – J1
TTL 1 = Isolation E2 controls J3 – J1
E3 controls J4 – J1
Absorptive Switch: 50 ohm termination present at J2, J3
and J4 (in isolation mode).
* Compliant by design, verification optional
Switching speed is defined as 50% TTL to 90% RF (t-on)
and 50% TTL to 10% RF (t-off).
Finish: Gold Plate per MIL-G-45204
Chem film per MIL-C-5541
Weight: 35g (max)
PART NUMBER ORDERING INFORMATION:
Add
Add
Add
Add
Add
Add
Add
Add
“-RC” suffix: RoHS-compliant
“-H” suffix: Hermetic seal
“-5” suffix: +/-5 V DC supplies
“-5-RC” suffix: +/-5 V DC supplies, RoHS-compliant
“-5-H” suffix: +/-5 V DC supplies, Hermetic seal
“-12” suffix: +/-15 V DC supplies
“-12-RC” suffix: +/-15 V DC supplies, RoHS-compliant
“-12-H” suffix: +/-15 V DC supplies, Hermetic seal
ISO 9001:2008 and AS9100 certified
For further information please contact:
Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make
changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales
representative to verify that the information in this data sheet is current before using this product. CSCS
does not assume any responsibility or liability arising out of the application or use of any product or service
described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a
product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any
other of the intellectual rights of CSCS or of third parties.
Cobham Signal & Control Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212
Fax: (732) 460-0214
[email protected]
Copyright 2015, Cobham Signal & Control Solutions. All rights reserved.
Revised Date: 12/03/2015
(732) 460-0212
www.cobham.com/CSCS
2