SBL3040PT

Preliminary_SBL3040PT
30A SCHOTTKY BARRIER RECTIFIER
Features
• Metal of silicon rectifier, majority carrier conduction
• Guard ring for transient protection
• Low power loss, high efficiency
• High current capability, low VF
• High surge capacity
• For use in low voltage, high frequency inverters, free
• Wheeling, and polarity protection applications
• RoHS compliant package
Application
‧ DC/DC Converters
‧ AC/DC Adaptors
Mechanical Data
Graphic symbol
• Case: TO-247AD molded plastic
• Polarity: As marked on the body
• Weight: 0.2 ounces, 5.6 grams
• Mounting position: Any
Packing & Order Information
50/Tube ; 1,000/Box
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Maximum Ratings (Tc=25°C unless otherwise noted)
Parameter
Symbol
SBL3040PT
Unit
Maximum repetitive peak reverse voltage
VRRM
40
V
Working peak reverse voltage
VRWM
28
V
Maximum DC blocking voltage
VDC
40
V
IF(AV)
30
A
IFSM
275
A
TJ
-55 to +150
°C
TSTG
-55 to +150
°C
Maximum average forward rectified current
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Operating junction temperature range
Storage temperature range
Publication Order Number: [SBL3040PT]
© Bruckewell Technology Corporation Rev. A -2014
Preliminary_SBL3040PT
30A SCHOTTKY BARRIER RECTIFIER
Electrical characteristics (Tc=25°C unless otherwise noted)
Parameter
Symbol
Instantaneous forward voltage at IF=15A, Tj=25°C
Maximum reverse current per leg
VF
Value
Typical
Max
--
Tj=25°C
0.55
Unit
V
1
u’A
7
m’A
IR
at working peak reverse voltage
Tj=100
Thermal characteristics (Tc=25°C unless otherwise noted)
Parameter
Typical thermal resistance
Symbol
Value
Unit
Rthja
2
°C/W
Notes:
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
(3) Cj Measured at 1.0MHz and reverse voltage of 4.0V DC.
Publication Order Number: [SBL3040PT]
© Bruckewell Technology Corporation Rev. A -2014
Preliminary_SBL3040PT
30A SCHOTTKY BARRIER RECTIFIER
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: [SBL3040PT]
© Bruckewell Technology Corporation Rev. A -2014