RS07B M

RS07B-M
Surface Mount Fast Rectifiers
Features
• Glass passivated device
• Ideal for surface mouted applications
• Low leakage current
• Metallurgically bonded construction
• High temperature soldering:
• 250°C/10 seconds at terminals
• RoHS compliant package
Mechanical Data
• Case: SOD-123 Molded plastic
• Epoxy: UL94V-O rate flame retardant
• Lead: Lead Formed for Surface Mount
• Polarity: Color band denotes cathode end
• Mounting position: Any
Packing & Order Information
3,000/Reel
Graphic symbol
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specifie.
Single phase, half wave, 60 Hz, resistive or inductive load
For capacitive load, derate current by 20%
Device marking code
RS
07B
RB
RS
07D
RD
RS
07G
RG
RS
07J
RJ
RS
07K
RK
RS
07M
RM
Unit
Maximum Recurrent Peak Reverse Voltage
VRRM
100
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
70
140
280
420
560
700
V
Maximum DC Blocking Voltage
VDC
100
200
400
600
800
1000
V
Maximum average forward rectified current
TA=65 °C (Note1)
Publication Order Number: [RS07B-M]
IF(AV)
0.7
© Bruckewell Technology Corporation Rev. A -2014
A
RS07B-M
Surface Mount Fast Rectifiers
Rating at 25 °C ambient temperature unless otherwise specifie.
Single phase, half wave, 60 Hz, resistive or inductive load
For capacitive load, derate current by 20%
RS
07B
RB
Device marking code
RS
07D
RD
RS
07G
RG
RS
07J
RJ
RS
07K
RK
RS
07M
RM
Unit
Peak forw ard surge current 8.3ms single
half-sine-w ave superimposed on rated load
IFSM
20
A
Typical thermal resistance (Note2)
RθJA
180
K/W
Maximum reverse recovery time (Note3)
Trr
Operating Temperature Range
TJ
-55 to +150
°C
TJ,TSTG
-55 to +150
°C
TL=25 °C
Storage Temperature Range
150
250
ns
500
NOTES
1.Averaged over any 20 ms period.
2.Thermal resistance junction to ambient, 6.0 mm 2 coppeer pads to each terminal.
3.Measured with IF=0.5A, IR=1A, Irr=0.25A
ELECTRICAL CHARACTERISTICS
Symbol
Parameter
VF
IR
Cj
Min
Typ
Max
Unit
--
--
1.15
V
--
--
--
4
Maximum instantaneous (NOTE4)
Forward voltage at 0.7A
Maximum DC reverse current @TA=25°C
At rated DC blocking voltage @TA=125°C
Typical junction capacitance (NOTE5)
10
50
--
V
A
NOTES
4.Pulse test:300μs pulse width,1% duty cycle.
5.Measured at 1.0MHz and applied average voltage of 4.0V DC.
Publication Order Number: [RS07B-M]
© Bruckewell Technology Corporation Rev. A -2014
RS07B-M
Surface Mount Fast Rectifiers
■RATING AND CHARACTERISTIC CURVES
FIG. 1 FORWARD DERATING CURVE
FIG. 2 PEAK JUNCTION CAPACITANCE
FIG. 3 TYPICAL FORWARD CHARACTERISTICS
FIG. 4 TYPICAL REVERSE CHARACTERISTICS
Publication Order Number: [RS07B-M]
© Bruckewell Technology Corporation Rev. A -2014
RS07B-M
Surface Mount Fast Rectifiers
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: [RS07B-M]
© Bruckewell Technology Corporation Rev. A -2014