RS07B THRU RS07M 100V-1000v SURFACE MOUNT RECTIFIER 0.7A FEATURES SOD-123FL • • • • • For surface mounted applications Low profile package Ideal for automated placement Glass passivated High temperature soldering: 260 °C/ 10 s at terminals • Wave and reflow solderable • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC Mechanical Data Case: DO-219AB (SMF) Polarity: band denotes cathode end Weight: approx. 15 mg MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single hase,half wave,60Hz,resistive or inductive load.For capactive load,derate current by 20%. RS07B RS07D RS07G RS07J RS07K RS07M Device marking code RB RD RG RJ RK RM UNITS Maximum recurrent peak reverse voltage VRRM 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 100 200 400 600 800 1000 V Maximum average forword rectified current T A=65℃ (NOTE 1) I(AV) 0.7 A IFSM 20 A RjθA 180 K/W Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load T L=25℃ Typical thermal resistance (NOTE 2) Maximum reverse recovery time (NOTE 3) trr Operating temperature range Tj - 55 --- + 150 ℃ TSTG - 55 --- + 150 ℃ Storage temperature range 150 250 500 ns NOTES:1.Averaged over any 20 ms period. 2. Thermal resistance junction to ambient, 6.0 mm 2 coppeer pads to each terminal. 3.Measured with I F=0.5A, IR=1A, Irr=0.25A. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com RS07B THRU RS07M 100V-1000v SURFACE MOUNT RECTIFIER RATINGS AND CHARACTERISTIC CURVES RS07B THRU RS07M 35 10 Typ. at 25 °C RS07D Typ. at 150 °C 1 RS07D RS07D 30 25 Typ. at 25 °C RS07G Typ. at 150 °C RS07G Typ. at 25 °C RS07J Typ. at 150 °C RS07J 0.1 0.01 CD (pF) IF (A) 0.7A RS07G 20 15 10 RS07J 5 0.001 0 0 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF (V) 18246 1 18248 Figure 1. Typical Forward Characteristics 10 100 VR (V) Figure 4. Typ. Diode Capacitance vs. Reverse Voltage 12 10 Typical at 150 °C 10 Max. at at 150 150 °C °C max. 1 f = 1 MHz 8 0.1 CD (pF) IF (A) Typical at 25 °C Max. at 25 °C RS07K 6 4 0.01 RS07K-M 2 0.001 0 0 0.4 0.8 1.2 1.6 2 2.4 VF (V) 21403 0.1 Figure 2. Typical Forward Characteristics 10 100 VR (V) Figure 5. Typ. Diode Capacitance vs. Reverse Voltage 1.6 1000 RS07B, RS07D, RS07G, RS07J Tie point temperature 1.4 100 TJ = 150 °C 1.2 TJ = 125 °C 10 1.0 IR (µA) IFAV (A) 1 21405 0.8 TJ = 100 °C 1 TJ = 75 °C Ambient temperature 0.6 0.1 TJ = 50 °C TJ = 0 °C TJ = 25 °C 0.4 0 TJ = - 50 °C 0.01 0.2 0 25 50 18247 75 100 125 0.001 150 Tamb (°C) 18249 Figure 3. Forward Current Derating Curve E-mail: [email protected] 0 100 200 300 400 500 600 VR (V) Figure 6. Typical Reverse Characteristics 2 of 2 Web Site: www.taychipst.com