RS07B, RS07D, RS07G, RS07J, RS07K www.vishay.com Vishay Semiconductors Fast Rectifier Surface Mount FEATURES • For surface mounted applications • Low profile package • Ideal for automated placement • Glass passivated • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Meets JESD 201 class 2 whisker test 17249 • Wave and reflow solderable MECHANICAL DATA • AEC-Q101 qualified Case: DO-219AB (SMF) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Polarity: band denotes cathode end Weight: approx. 15 mg Packaging codes / options: GS18/10K per 13" reel (8 mm tape) GS08/3K per 7" reel (8 mm tape) Int. construction: single PARTS TABLE PART ORDERING CODE MARKING REMARKS RS07B RS07B-GS18 or RS07B-GS08 RB Tape and reel Tape and reel RS07D RS07D-GS18 or RS07D-GS08 RD RS07G RS07G-GS18 or RS07G-GS08 RG Tape and reel RS07J RS07J-GS18 or RS07J-GS08 RJ Tape and reel RS07K RS07K-GS18 or RS07K-GS08 RK Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION VALUE UNIT RS07B VRRM 100 V VRRM 200 V RS07G VRRM 400 V RS07J VRRM 600 V RS07K VRRM 800 V RS07B VRMS 70 V RS07D VRMS 140 V RS07G VRMS 280 V RS07J VRMS 420 V RS07K VRMS 560 V RS07B VDC 100 V RS07D VDC 200 V RS07G VDC 400 V RS07J VDC 600 V RS07K VDC 800 V Ttp = 65 °C IF(AV) 1.4 A TA = 45 °C IF(AV) 0.5 A TL = 25 °C IFSM 30 A Maximum RMS voltage Maximum DC blocking voltage Peak forward surge current 8.3 ms half sine-wave SYMBOL RS07D Maximum repetitive peak reverse voltage Maximum average forward rectified current PART Rev. 2.1, 05-Sep-14 Document Number: 85742 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RS07B, RS07D, RS07G, RS07J, RS07K www.vishay.com Vishay Semiconductors THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Thermal resistance junction to tie point Thermal resistance junction to ambient air (1) Operating junction and storage temperature range SYMBOL VALUE UNIT RthJP 30 K/W RthJA 180 K/W Tj, Tstg -55 to 150 °C Note (1) Mounted on epoxy glass PCB with 3 mm x 3 mm Cu pads (≥ 40 μm thick) ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION IF = 0.7 A (1) Instaneous forward voltage IF = 1 A (1) TA = 25 °C Maximum DC reverse current at rated DC blocking voltage TA = 125 °C IF = 0.5 A, IR = 1 A, Irr = 0.25 A Reverse recovery time Typical capacitance 4 V, 1 MHz PART RS07B RS07D RS07G RS07J RS07K RS07B RS07D RS07G RS07J RS07K RS07B RS07D RS07G RS07J RS07K RS07B RS07D RS07G RS07J RS07K RS07B RS07D RS07G RS07J RS07K SYMBOL VF VF VF VF VF IR IR IR IR IR IR IR IR IR IR trr trr trr trr trr Cj Cj Cj Cj Cj MIN. TYP. MAX. 1.15 1.15 1.15 1.15 1.3 10 10 10 10 2 50 50 50 50 150 150 150 150 250 300 UNIT V V V V V μA μA μA μA μA μA μA μA μA μA ns ns ns ns ns pF pF pF pF pF 9 9 9 9 4 Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10 10 Typical at 150 °C Max. at at 150 150 °C °C max. Typ. at 25 °C RS07G Typ. at 150 °C RS07G Typ. at 25 °C RS07J Typ. at 150 °C RS07J 0.1 0.01 0.001 18246 1 Typical at 25 °C IF (A) IF (A) Typ. at 25 °C RS07D Typ. at 150 °C 1 RS07D 0.1 Max. at 25 °C 0.01 RS07K-M 0.001 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF (V) Fig. 1 - Typical Forward Characteristics 0 21403 0.4 0.8 1.2 1.6 2 2.4 VF (V) Fig. 2 - Typical Forward Characteristics Rev. 2.1, 05-Sep-14 Document Number: 85742 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RS07B, RS07D, RS07G, RS07J, RS07K www.vishay.com Vishay Semiconductors 1.6 1000 RS07B, RS07D, RS07G, RS07J Tie point temperature 1.4 100 TJ = 150 °C TJ = 125 °C 10 1.0 TJ = 100 °C IR (µA) IFAV (A) 1.2 0.8 1 TJ = 75 °C 0.1 TJ = 25 °C Ambient temperature 0.6 TJ = 50 °C TJ = 0 °C 0.4 TJ = - 50 °C 0.01 0.2 0 0 25 50 18247 75 100 125 0.001 150 Tamb (°C) 0 100 200 300 400 500 600 VR (V) 18249 Fig. 6 - Typical Reverse Characteristics Fig. 3 - Forward Current Derating Curve 35 1000 TJ at 150 °C RS07K RS07D 30 TJ at 125 °C 100 RS07G 20 15 TJ at 100 °C 10 IR (µA) CD (pF) 25 TJ at 75 °C 1 10 RS07J TJ at 25 °C 0.1 5 0 0.1 1 18248 10 100 VR (V) 0.01 100 21406 Fig. 4 - Typical Diode Capacitance vs. Reverse Voltage 300 500 700 900 VR (V) Fig. 7 - Typical Reverse Characteristics 12 10 f = 1 MHz CD (pF) 8 RS07K 6 4 2 0 21405 0.1 1 10 100 VR (V) Fig. 5 - Typical Diode Capacitance vs. Reverse Voltage Rev. 2.1, 05-Sep-14 Document Number: 85742 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RS07B, RS07D, RS07G, RS07J, RS07K www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): DO-219AB (SMF) 0.85 (0.033) 0 (0.000) 0.1 (0.004) 5 5 0.05 (0.002) 1.7 (0.067) Detail Z enlarged 1.2 (0.047) 0.8 (0.031) 0.25 (0.010) 1.9 (0.075) 0.35 (0.014) 1.08 (0.043) 2.9 (0.114) 0.88 (0.035) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) Foot print recommendation: Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 1.3 (0.051) 1.4 (0.055) 1.3 (0.051) 2.9 (0.114) 17247 Rev. 2.1, 05-Sep-14 Document Number: 85742 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RS07B, RS07D, RS07G, RS07J, RS07K www.vishay.com Vishay Semiconductors BLISTERTAPE DIMENSIONS in millimeters: DO-219 AB (SMF) PS Document-No.: S8-V-3717.02-001 (3) 18513 Rev. 2.1, 05-Sep-14 Document Number: 85742 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000