NetXtend™ Flex Power & Battery Enclosure Key Features NetSure™ 502 DC Power System neSure™ rectifiers provide high energy efficiency nRemotely view and control system via Ethernet nAdvanced remote monitoring with ACU+ controller NetXtend™ Flex Enclosure nSeparate temperaturecontrolled zones for power and batteries nDoor-mounted cooling system & rear cable-entry compartment nPull out battery drawers accept VRLA batteries nTelcordia GR-487 certified, Seismic Zone-4 rated and UL Listed Delivering industry-leading NetSure™ DC power reliability and multi-string high capacity battery backup, the NetXtend™ Flex Power & Battery Enclosure fully supports networking equipment at wireless cell sites. Description The NetXtend™ Flex Power & Battery Enclosure is designed to house DC power equipment, electronics and VRLA batteries in a single cabinet. Two temperature controlled compartments are monitored with an Environmental Control Unit (ECU) that adjusts thermal settings to maintain ideal conditions within each chamber, while simultaneously decreasing system power consumption and noise. All DC power-feed cables to customer equipment are surge protected at the distribution bus. Cabinets are available in both 60" and 72" heights. Application The NetXtend™ Flex Power & Battery Enclosure is a full featured outdoor equipment cabinet designed for use at wireless cell sites. The enclosure can be configured with several different NetSure™ DC power systems, depending on your power needs, and includes a separate compartment for large-capacity VRLA batteries. Technical Specifications DC Power System Features Nominal System Voltage -48 VDC Control Microprocessor (ACU+) Rated Output Capacity – Maximum Configuration NetSure™ 502 System ZZ041: 150 A (N+1) (582136800) ZZ054: 350 A (N+1) Rectifier 41.7 A (2000 W) output Distribution Panel (20) load positions available, for ZZ041 (4) GMT fuse positions available for ZZ054 Top: (24) load positions available; Bottom: (3) battery disconnect positions available, (11) load positions available, (4) GMT fuse positions available Environmental Operating Temperature Humidity -40 °F to 115 °F (-40 °C to 46 °C) continuous 0% to 95% relative humidity, non-condensing Thermal Solutions Power Chamber Battery Chamber 2500 watt door-mounted heat exchanger Thermoelectric Cooling/Heating (VRLA Batteries) Equipment Rack Space Ground Bar Terminal Block Safety DC power system Enclosure 160300D-NXFlexPwrBat / 0614 See ordering information 10 positions 12-position Phoenix alarm block, 32-position Phoenix alarm bunching block UL 1801 Listed (US & Canada), NEBS Level 3 GR-487, UL 60950, and Seismic Zone 4 compliant 1 NetXtend™ Flex Power & Battery Enclosure Ordering Information Part Number F2013066 equipped with: F2013084 equipped with: Description Outdoor DC Power System, 752 lbs. F1010697 NetXtend™ Flex Enclosure H x W x D: 183 cm x 81 cm x 99 cm (72" x 32" x 39") 15 RU total equipment space; 3 RU available (1) 582136800ZZ054 NetSure™ 502 DC power system (1) 58213680013 two power shelves, 58 cm (23") w/dist. (1) 1M820BNAZZ006 ACU+ controller (1) 582136800MC NetSure™ 502 (2) row distribution cab. (2) 58213680090 temperature probes, 3 m (9.8 ') (6) 540946 4.2 m (14') Molex AC input cord (1) 541308 relay output cable, 24 position, shelf (1) 541309 relay output assembly cable, 24 position, cust (1) 423349400 ESD ground assembly (1) AC junction box* 549017 GMT fuse option board, (4) positions available (3) pull-out battery trays; thermoelectric cooling (VRLA batteries) 2500 watt door-mounted heat exchanger 12-pair Phoenix alarm block 32-pair Phoenix alarm bunching block Strikesorb DC surge protection (3) 100 amp DC battery disconnects Duplex AC convenience outlet 10-position ground bar Outdoor DC Power System, 737 lbs. F1010698 NetXtend™ Flex Enclosure H x W x D: 183 cm x 81 cm x 99 cm (72" x 32" x 39") 15 RU total equipment space; 9 RU available (1) 582136800ZZ041 NetSure™ 502 DC power system (1) 58213680013 two power shelves, 58 cm (23") w/dist. (1) 1M820BNAZZ006 ACU+ controller (1) 582136800MC NetSure™ 502 (2) row distribution cab. (2) 58213680090 temperature probes, 3 m (9.8 ') (6) 540946 4.2 m (14') Molex AC input cord (1) 541308 relay output cable, 24 position, shelf (1) 541309 relay output assembly cable, 24 position, cust (1) 423349400 ESD ground assembly (1) AC junction box* 549017 GMT fuse option board, (4) positions available (3) pull-out battery trays; thermoelectric cooling (VRLA batteries) 2500 watt door-mounted heat exchanger 12-pair Phoenix alarm block 32-pair Phoenix alarm bunching block Strikesorb DC surge protection (3) 100 amp DC battery disconnects Duplex AC convenience outlet 10-position ground bar * Phoenix pass-through terminal blocks accept individual customer fuse-protected AC feeds for cabinet circuits. Part Number F2013088 equipped with: Description Outdoor DC Power System F1010699 NetXtend™ Flex Enclosure H x W x D: 152 cm x 81 cm x 99 cm (60" x 32" x 39") 15 RU total equipment space; 9 RU available (1) 582136800ZZ041 NetSure™ 502 DC power system (1) 58213680012 power shelf, 58 cm (23") w/distribution (1) 1 M820BNAZZ005 ACU+ controller w/ 552363 Verizon software (1) 582136800AC 58 cm (23") 24 position dist. panel (2) 58213680090 temperature probes, 3 m (9.8 ') (1) 423349400 ESD ground assembly (1) AC junction box* 545333 GMT fuse option board, (4) positions available (2) pull-out battery trays; thermoelectric cooling (VRLA batteries) 2500 watt door-mounted heat exchanger 12-pair Phoenix alarm block 32-pair Phoenix alarm bunching block Strikesorb DC surge protection (2) 100 amp DC battery disconnects Duplex AC convenience outlet 10-position ground bar * Phoenix pass-through terminal blocks accept individual customer fuse-protected AC feeds for cabinet circuits. Accessories Part Number Description Enclosure Accessories F1010599 10 cm (4") mounting plinth DC Power Accessories & Spare Parts 1R482000E Rectifier, NetSure™ 502, -48 VDC, 40 A/2000 W 547490 SM-TEMP, 8-input temperature module 552992 Temperature probe, 10.3 m (33.7') 556155 Temperature probe, 3.3 meters (10.8') 04119122 Temperature probe extension, 10 m (32.8') 552822 Temperature probe sensor, 0.3 m (.98') 1M820BNAZZ005 ACU+ controller for 582136800ZZ041 1M820BNAZZ006 ACU+ controller for 582136800ZZ054 545412 Hardware kit, single position 545405 90 degree adapter, single pole MA4C5U31 IB2, customer interface board Bullet nose type circuit breakers (1 A to 250 A) Supported Batteries Valve-Regulated Lead-Acid (VRLA) batteries in 170 Ahr – 190 Ahr N/A capacities (consult Emerson Engineering for specific models) Note: Batteries are not supplied by Emerson. EmersonNetworkPower.com/EnergySystems (North America) EmersonNetworkPower.eu/EnergySystems (EMEA) © Emerson Network Power, Energy Systems, North America, Inc. 2014. Business-Critical Continuity™, Emerson Network Power™, the Emerson Network Power logo, Emerson™ and Consider it Solved are service marks and trademarks of Emerson Electric Co. EnergyMaster ™, eSure™, NetPerform™, NetReach™, NetSpan™, NetSure™ and NetXtend™ are trademarks of Emerson Network Power, Energy Systems, North America, Inc. Any other product, brand, or company names or logos are the property of the respective owner. 2 While every precaution has been taken to ensure accuracy and completeness herein, Emerson Electric Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications subject to change without notice. 160300D-NXFlexPwrBat / 0614