DB151S thru DB157S REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 1.5 Amperes Features • Rating to 1000V PRV • Ideal for printed circuit board • Low forward voltage drop,high current capability • Reliable low cost construction utilizing molded plastic technique results in inexpensive product • The plastic material has UL flammability classification 94V-0 • RoHS compliant package Mechanical Data • Polarit:As marked on body • Weight:0.02 ounces,0.38 grams • Mounting position:Any Packing & Order Information 5,000/Reel Graphic symbol MAXIMUM RATINGS AND THERMAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified, Single phase, half wave, 60Hz, Resistive or Inductive load, For Capacitive load, derate current by 20%. DB151S DB152S DB153S DB154S DB155S DB156S DB157S CHARACTERISTICS Maximum repetitive peak UNITS VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRWS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 100 V reverse voltage Maximum average forward rectified current at TA=40°C IF(AV) 1.5 A IFSM 50 A Peak forward surge current 8.3ms single half-sine-wave Super Imposed on Rated Load (JEDEC Method) Publication Order Number: [DB151S thru DB157S] © Bruckewell Technology Corporation Rev. A -2014 DB151S thru DB157S REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 1.5 Amperes MAXIMUM RATINGS AND THERMAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified, Single phase, half wave, 60Hz, Resistive or Inductive load, For Capacitive load, derate current by 20%. DB151S DB152S DB153S DB154S DB155S DB156S DB157S CHARACTERISTICS Maximum Forward Voltage at 1.5A DC VF 1.1 UNITS V Maximum DC Reverse Current @TJ=25°C at Rated DC Bolcking IR 10 500 V Voltage @TJ=125°C 2 I t Rating for Fusing (t<8.3ms) Typical Junctio Capacitance Per Element (Note1) Typical Thermal Resistance (Note2) Operating Temperature Range Storage Temperature Range It 2 10.4 μA Cj 25 pF RθJA 40 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C Note: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC 2.Thermal resistance from junction to ambient mounted on P.C.B with 0.5*0.5"(13*13mm) copper pads. 3.The typical data above is for reference only Publication Order Number: [DB151S thru DB157S] © Bruckewell Technology Corporation Rev. A -2014 DB151S thru DB157S REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 1.5 Amperes ■RATING AND CHARACTERISTIC CURVES DB151S thru DB157S FIG. 1 FORWARD URRENT DERATING CURVE FIG. 2 MAXIMUM NON-REPETITIVE SURGE CURRENT FIG. 3 TYPICAL JUNCTION CAPACITANCE FIG. 4 TYPICAL FORWARD CHARACTERISTICS FIG. 5 PERCENT OF RATED PEAK REVERSE Publication Order Number: [DB151S thru DB157S] © Bruckewell Technology Corporation Rev. A -2014 DB151S thru DB157S REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 1.5 Amperes Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [DB151S thru DB157S] © Bruckewell Technology Corporation Rev. A -2014