EL05 Series Transient Voltage Suppressors for ESD Protection Description The EL05 Series is a transient voltage suppressor designed to protect components which are connected to data and transmission lines against ESD. It clamps the voltage just above the logic level supply for positive transients and to a diode drop below ground for negative transients. Features • ESD protection>40 kilovolts • Low clamping voltage • 500W peak pulse power(8/20μs) • Ultralow capacitance: 5pF • RoHS compliant package Complies with the following standards IEC61000-4-2 Level 4 15 kV (air discharge); 8 kV(contact discharge) MIL STD 883E - Method 3015-7 Class 3 25 kV HBM (Human Body Model) Mechanical Data • Molded JEDEC SOT-23 Package • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C Applications: • Ethernet – 10/100 base T • Cellular Phones • FireWire • Audio/Video inputs • Portable Electronics Packing & Order Information 3,000/Reel Graphic symbol Publication Order Number: [EL05] © Bruckewell Technology Corporation Rev. A -2014 EL05 Series Transient Voltage Suppressors for ESD Protection MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Absolute ratings (limiting value) Symbol Parameter Value Unit 300 W Ppk Peak Pulse Power (tp = 8/20μs) TJ Operating Temperature -55 to +125 °C TSTG Storage Temperature -55 to +150 °C TL Lead Solder Temperature – Maximum (10 Second Duration) 260 °C Electrical Characteristics Part Numbers EL05 ■Typical Min. V VBR Typ. V 6.0 7.0 Max. V IT VRWM IR mA V uA Cj TYP PF 8.0 1 5 20 5 Device Characteristics FIG.1-NON-REPETITIVE PEAK PULSE POWER VS. TIME Publication Order Number: [EL05] FIG.2-POWER DERATING CURVE © Bruckewell Technology Corporation Rev. A -2014 EL05 Series Transient Voltage Suppressors for ESD Protection Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [EL05] © Bruckewell Technology Corporation Rev. A -2014