'hϰ:> THRU 'hϰD> ϰ'>^^W^^/sdZ/'Zd/&/ZͲϲϬϬsΕϭϬϬϬs PRIMARY CHARACTERISTICS GBU(L) ● Body Marking :GBU4JL~GBU4ML PD 6W VRRM 600V,800V,1000V I(AV) 3.0A VF 1.1V 2 PACKAGE EX : GBU4JL UL Mark Logo Marking Code Date Code VYM GBU 4JL Positive Electrodes 2 It 93.3 & 70.1 A sec TJ,Max 150℃ V:Product Line Code Y:Last digital of year, Ex : 4-2014,5-2015… M:Month Code, Ex : 1-1,2-2,---10-O,11-N,12-D FEATURES MECHANICAL DATA Ideal for printed circuit board Case：Molded plastic,GBU(L) Surge overload rating: 150\130 Amperes Polarity：As Above Marked peak Terminals :Plated terminals, solderable per MIL-STD-750,Method Moisture Sensitivity Level 1 2026 Epoxy : UL94-V0 rated flame retardant MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL GBU4JL GBU4KL GBU4ML UNIT Mark Code SYMBOL GBU4JL GBU4KL GBU4ML UNIT Maximum Recurrent Peak Reverse Voltage VRRM 600 800 1000 Volts Maximum RMS Voltage VRMS 420 560 700 Volts VDC 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward TC=9 0℃ Rectified Output Current at TA=25℃ (see Fig.1) Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Rating for fusing (t<8.3ms) Typical Thermal Resistance (Note 2) (Note 3) 4.0 I(AV) Amps 3.0 IFSM 150 130 Amps I2t 93.3 70.1 A2sec RΘJA 8.6 RΘJC 3.1 ℃/W Typical Junction Capacitance (Note 1) CJ 94 PF Operating Temperature Range TJ -55 to +150 ℃ TSTG -55 to +150 ℃ VF 1.1 Volts Storage Temperature Range Forward Voltage Range at 6.0A DC Maximum Average Reverse Current at @TA=25℃ Rated DC Blocking Voltage @TA=125℃ IR 5.0 500 μAmps NOTES :1. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 2. Device mounted in free air,no heatsink,P.C.B at 0.375"(9.5MM) lead length with 0.47 x 0.47"(12 x 12MM) copper pads. 3. Device mounted on a 2.6 x 1.4' x 0.06' tjick (6.5 x 3.5 x 0.15 cm) AL plate. 2015.03 www.willas.com.tw Rev.X02 P1 'hϰ:> THRU 'hϰD> ϰ'>^^W^^/sdZ/'Zd/&/ZͲϲϬϬsΕϭϬϬϬs 4.0 175 Heatsink Mounting, TC Peak Forward Surge Current (A) AVERAGE FORWARD OUTPUT CURRENT, (A) RATING AND CHARACTERISTICS CURVES 2.6 x 1.4' x 0.06' tjick (6.5 x 3.5 x 0.15 cm) AL plate. 3.0 2.0 P.C.B. Mounted,TA 0.47x0.47" (12x12mm) Copper Pads 0.375" (9.5mm) Lead Length 60Hz Resistive or Inductive Load 1.0 8.3mS Single Half Sine-Wave JEDEC Method 150 125 100 75 50 1.0 Cycle 0 25 0 50 100 TEMPERATURE, ( Number of Cycles at 60 Hz C) FIG.1 DERATING CURVE OUTPUT RECTIFIED CURRENT Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode 1000 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 1 Tj = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 0.1 Tj = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 600 - 1000 V 0.01 0.4 1.2 1.0 0.8 0.6 1.4 10 0.1 1.6 100 10 1 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 500 100 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (µA) 100 10 1 150 O 100 Tj = 125 °C 10 1 600 - 1000 V 0.1 Tj = 25 °C Figure 4. Typical Reverse Leakage Characteristics Pe 0.01 0 20 40 60 80 10 1 0.1 0.01 100 Figure 4. Typical Reverse Leakage Characteristics Per Diode 2015.03 0.1 1 10 100 t - Heating Time (s) Percent of Rated Peak Reverse Voltage (%) Figure 6. Typical Transient Thermal Impedance www.willas.com.tw Rev.X02 P2 'hϰ:> THRU 'hϰD> ϰ'>^^W^^/sdZ/'Zd/&/ZͲϲϬϬsΕϭϬϬϬs Outline Drawing GBU(L) .143(3.65) .130(3.30) .880(22.3) .850(21.6) .160(4.10) .140(3.50) .075 .740(18.8) (1.90)R .720(18.3) .310(7.90) .290(7.40) .085(2.16) .065(1.65) .108(2.75) .057(1.46) .101(2.56) .075(1.90) .093(2.35) .065(1.65) .716(18.2) .685(17.4) .025(0.64) .050(1.28) .031(0.80) .190(4.83) .210(5.33) Dimensions in inches and (millimeters) 2015.03 www.willas.com.tw .018(0.46) Rev.G Rev.X02 P3 ϰ'>^^W^^/sdZ/'Zd/&/ZͲϲϬϬsΕϭϬϬϬs 'hϰ:> THRU 'hϰD> Ordering Information: Device PN Part Number - (1)G(2)-WS Packing Tube Packing:20pcs/Tube; 1000pcs/Box Note: 1. Packing code: Empty is Tube Packing 2. RoHS product for packing code suffix ”G”, Halogen free product for packing code suffix "H" . ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.03 www.willas.com.tw Rev.X02 P4