SS20PU80

SS20PU80
Product profile
High Current Density Surface Mount Ultra Low VF
Schottky Rectifier
General description
Rectifiers 20 Amp 80V
Features
Very low profile - typical height of 1.1 mm
Ideal for automated placement
Low forward voltage drop, low power losses
High efficiency
Low thermal resistance
Meets MSL level 1, per J-STD-020
Solder dip 260 °C max. 10 s, per JESD 22-A111
22
Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
Mechanical data
Case: Conform to JEDEC TO-277A;
277A; Suffix /A
Industry TO-277B;
277B; Suffix /B
Molding compound meets UL 94 V-0
0 flammability
Maximum Ratings (Tc=25°C unless otherwise noted)
Parameter
Symbol
SS
SS20PU80
Unit
Maximum repetitive peak reverse voltage
VRRM
80
V
RMS Voltage (Max.)
VRMS
56
V
Working peak reverse voltage
VRWM
80
V
Total Device
IF(AV)
20
A
8.3ms single half sine-wave
sine
superimposed
IFSM
216
A
TJ
-55
55 to +150
+1
°C
TSTG
-55
55 to +150
+1
°C
Maximum average forward rectified current
Peak forward surge current
on rated load (JEDEC Method)
Operating junction temperature range
Storage temperature range
Publication Order Number: SS20PU80
©Bruckewell Technology Corporation Rev. A -2014
SS20PU80
THERMAL CHARACTERISTICS
Parameter
Symbol
Value
Unit
Typical thermal resistance
RθJC
3
°C/W
Notes:
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40
Electrical characteristics (Tc=25°C unless otherwise noted)
OFF CHARACTERISTICS
Parameter
Symbol
Value
Unit
Typical
Max
0.46
0.50
0.67
0.73
at IF=5A, Tj=125°C
0.39
0.42
at IF=20A, Tj=125°C
0.63
0.67
Instantaneous forward voltage
at IF=5A, Tj=25°C
at IF=20A, Tj=25°C
VF
Maximum reverse current Tj=25°C
V
60
u'A
50
m'A
IR
at working peak reverse voltage Tj=125°C
DEVICE MARK
SS20PU80
Publication Order Number: SS20PU80
©Bruckewell Technology Corporation Rev. A -2014
SS20PU80
Characteristic Curves
Publication Order Number: SS20PU80
©Bruckewell Technology Corporation Rev. A -2014
SS20PU80
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: SS20PU80
©Bruckewell Technology Corporation Rev. A -2014