&DϯϮϬͲD,d THRU &DϯϭϬϬͲD,d ϯ͘Ϭ^ƵƌĨĂĐĞDŽƵŶƚ^ĐŚŽƚƚŬLJĂƌƌŝĞƌ ZĞĐƚŝĨŝĞƌƐͲϮϬsͲϭϬϬs PRIMARY CHARACTERISTICS VRRM SOD-123HT 20V,30V,40V,50V 60V,80V,100V IO 3A VF 0.55V,0.70V,0.85V TJ,Max 150℃ PACKAGE Marking Code : Please See Table 1 2 Ex : FM320-MHT Pin1 Pin2 32 cathode anode 1 FEATURES 2 MECHANICAL DATA Batch process design, excellent power Case：Molded plastic,SOD-123HT dissipation offersbetter reverse Polarity：Shown above leakage current and thermal Terminals :Plated terminals, resistance solderable per MIL-STD-750,Method Low profile surface mounted 2026 application in order tooptimize board space Epoxy : UL94-V0 rated flame retardant Tiny plastic SMD package Low power loss, high efficiency High current capability, low forward voltage drop High surge capability Guardring for overvoltage protection Ultra high-speed switching Moisture Sensitivity Level 1 MAXIMUM RATINGS (At TA = 25℃ unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage SYMBOL VRRM FM320-MHT FM330-MHT FM340-MHT FM350-MHT FM360-MHT FM380-MHT FM3100-MHT UNITS 20 30 40 50 60 80 100 Volts Maximum RMS Volts VRMS 14 21 28 35 42 56 70 Volts Maximum DC Blocking Voltage VDC 20 30 40 60 80 100 Volts Maximum Average Forward Current Peak Forward Surge Current IFM (surge):8.3 ms single half IO 50 3.0 IFSM 50 CJ 160 pF Thermal resistance junction to ambient RθJA 70 ℃/W Thermal resistance junction to case RθJC Typical Junction Capacitance f=1MHz and applied 4V DC reverse voltag ℃/W -55 ~ +150 -55 ~ +150 TSTG Storage Temperature Range Amps 35 -55 ~ +125 TJ Operating Storage Temperature Range Amps ℃ ℃ ELECTRICAL CHARACTERISTICS (At TA = 25℃ unless otherwise noted) CHARACTERISTICS Marking Code Maximum Forward Voltage at 3.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage 2015.ϭϮ SYMBOL VF @Tj = 25℃ @Tj =150℃ IR FM320-MHT FM330-MHT FM340-MHT FM350-MHT FM360-MHT FM380-MHT FM3100-MHT UNITS 32 33 34 35 36 38 310 0.55 0.70 0.85 Volts 0.2 mAmps 10 www.willas.com.tw Rev.&0Ϯ &DϯϮϬͲD,d THRU &DϯϭϬϬͲD,d ϯ͘Ϭ^ƵƌĨĂĐĞDŽƵŶƚ^ĐŚŽƚƚŬLJĂƌƌŝĞƌ ZĞĐƚŝĨŝĞƌƐͲϮϬsͲϭϬϬs Rating and characteristic curves (FM320-MHT THRU FM3100-MHT) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FIG.2-TYPICAL FORWARD AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 3.0 50 2.5 FM HT ~F M3 10 4 M3 0-M HT HT 0-M 1.0 0.5 0 0 20 40 60 80 100 120 140 160 180 200 LEAD TEMPERATURE,(°C) FIG.3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT INSTANTANEOUS FORWARD CURRENT,(A) 0-M 1.5 35 ~F HT 0-M 32 FM 2.0 20V ~ 40V 10 50V ~ 60V 80V ~ 100V 3.0 1.0 0.1 TJ=25 C Pulse Width 300us 1% Duty Cycle PEAK FORWARD SURGE CURRENT,(A) 50 .01 40 .1 .3 .5 .7 .9 1.1 1.3 1.5 FORWARD VOLTAGE,(V) 30 8.3ms Single Half TJ=25 C Sine Wave 20 JEDEC method 10 FIG.5 - TYPICAL REVERSE 0 1 5 50 10 CHARACTERISTICS 100 100 20V~40V 50V~100V NUMBER OF CYCLES AT 60Hz 10 REVERSE LEAKAGE CURRENT, (mA) FIG.4-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,(pF) 700 600 500 400 300 200 TJ=100°C 1.0 0.1 TJ=25°C 0.01 100 0 .01 .05 .1 .5 1 5 10 50 100 0.001 REVERSE VOLTAGE,(V) 2015.ϭϮ 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) www.willas.com.tw Rev.&0Ϯ &DϯϮϬͲD,d THRU &DϯϭϬϬͲD,d ϯ͘Ϭ^ƵƌĨĂĐĞDŽƵŶƚ^ĐŚŽƚƚŬLJĂƌƌŝĞƌ ZĞĐƚŝĨŝĞƌƐͲϮϬsͲϭϬϬs Outline Drawing SOD-123HT 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 0.071(1.8) 0.055(1.4) 0.039(1.0) 0.024(0.6) 0.004(0.10)Typ. 0.031(0.8) Typ. 0.083(2.1) 0.075(1.9) 0.024(0.6)Typ. 0.051(1.3) 0.043(1.1) 0.032(0.8) 0.028(0.6) 0.0335(0.85) 0.0296(0.75) 0.047(1.2) 0.039(1.0) 0.047(1.2) 0.039(1.0) Dimensions in inches and (millimeters) Rev.A 2015.ϭϮ www.willas.com.tw Rev.&0Ϯ &DϯϮϬͲD,d THRU &DϯϭϬϬͲD,d ϯ͘Ϭ^ƵƌĨĂĐĞDŽƵŶƚ^ĐŚŽƚƚŬLJĂƌƌŝĞƌ ZĞĐƚŝĨŝĞƌƐͲϮϬsͲϭϬϬs Suggested Soldering Pad Layout SOD-123HT .036 (0.90) .044 (1.10) .075 (1.90) .048 (1.20) .036 (0.90) .028 (0.70) Dimensions in inches and (millimeters) 2015.ϭϮ www.willas.com.tw RevA Rev.&0Ϯ &DϯϮϬͲD,d THRU &DϯϭϬϬͲD,d ϯ͘Ϭ^ƵƌĨĂĐĞDŽƵŶƚ^ĐŚŽƚƚŬLJĂƌƌŝĞƌ ZĞĐƚŝĨŝĞƌƐͲϮϬsͲϭϬϬs Reel packing PACKAGE SOD-123HT REEL SIZE 7" COMPONENT SPACING REEL (pcs) BOX (pcs) (m/m) 4.0 3,000 30,000 INNER BOX REEL DIA, CARTON SIZE CARTON (m/m) (m/m) (m/m) (pcs) 183*183*123 178 382*262*387 240,000 P0 P1 d E F B A W P D2 D1 T C W1 D unit:mm Item Symbol Tolerance SOD-123HT Carrier width Carrier length Carrier depth Sprocket hole 13" Reel outside diameter 13" Reel inner diameter 7" Reel outside diameter 7" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width Reel width A B C d D D1 D D1 D2 E F P P0 P1 T W W1 0.1 0.1 0.1 0.1 2.0 min 2.0 min 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.3 1.0 2.00 3.85 1.10 1.50 178.00 62.00 13.00 1.75 3.50 4.00 4.00 2.00 0.23 8.00 11.40 Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. 2015.ϭϮ www.willas.com.tw Rev.&0Ϯ ϯ͘Ϭ^ƵƌĨĂĐĞDŽƵŶƚ^ĐŚŽƚƚŬLJĂƌƌŝĞƌ ZĞĐƚŝĨŝĞƌƐͲϮϬsͲϭϬϬs &DϯϮϬͲD,d THRU &DϯϭϬϬͲD,d Ordering Information: Device PN Part Number ‐T(1)G(2)‐WS Note: (1) Packing code, Tape & Reel Packing Packing Tape&Reel: 3 Kpcs/Reel (2) Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.ϭϮ www.willas.com.tw Rev.&0Ϯ