IRF IRF7329PBF

PD - 95042
IRF7329PbF
HEXFET® Power MOSFET
l
l
l
l
l
l
Trench Technology
Ultra Low On-Resistance
Dual P-Channel MOSFET
Low Profile (<1.8mm)
Available in Tape & Reel
Lead-Free
VDSS
RDS(on) max (mW)
ID
17@VGS = -4.5V
21@VGS = -2.5V
±9.2A
-12V
30@VGS = -1.8V
±4.6A
±7.4A
Description
New P-Channel HEXFET ® power MOSFETs from
International Rectifier utilize advanced processing
techniques to achieve extremely low on-resistance per
silicon area. This benefit, combined with the ruggedized
device design that HEXFET Power MOSFETs are well
known for, provides the designer with an extremely efficient
and reliable device for use in a wide variety of applications.
The SO-8 has been modified through a customized
leadframe for enhanced thermal characteristics and
multiple-die capability making it ideal in a variety of
power applications. With these improvements, multiple
devices can be used in an application with dramatically
reduced board space. The package is designed for
vapor phase, infrared, or wave soldering techniques.
S1
1
8
D1
G1
2
7
D1
S2
3
6
D2
G2
4
5
D2
SO-8
Top View
Absolute Maximum Ratings
Parameter
VDS
ID @ TA = 25°C
ID @ TA= 70°C
IDM
PD @TA = 25°C
PD @TA = 70°C
VGS
TJ, TSTG
Drain- Source Voltage
Continuous Drain Current, VGS @ -4.5V
Continuous Drain Current, VGS @ -4.5V
Pulsed Drain Current 
Power Dissipation ƒ
Power Dissipation ƒ
Linear Derating Factor
Gate-to-Source Voltage
Junction and Storage Temperature Range
Max.
Units
-12
-9.2
-7.4
-37
2.0
1.3
16
± 8.0
-55 to + 150
V
A
W
mW/°C
V
°C
Thermal Resistance
Symbol
RθJL
RθJA
www.irf.com
Parameter
Junction-to-Drain Lead
Junction-to-Ambient ƒ
Typ.
Max.
Units
–––
–––
20
62.5
°C/W
1
10/7/04
IRF7329PbF
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
∆V(BR)DSS/∆TJ
Parameter
Drain-to-Source Breakdown Voltage
Breakdown Voltage Temp. Coefficient
RDS(on)
Static Drain-to-Source On-Resistance
VGS(th)
gfs
Gate Threshold Voltage
Forward Transconductance
IDSS
Drain-to-Source Leakage Current
V(BR)DSS
IGSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Ciss
Coss
Crss
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Min.
-12
–––
–––
–––
–––
-0.40
25
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
Typ.
–––
0.007
–––
–––
–––
–––
–––
–––
–––
–––
–––
38
6.8
8.1
10
8.6
340
260
3450
1000
640
Max. Units
Conditions
–––
V
VGS = 0V, ID = -250µA
––– V/°C Reference to 25°C, I D = -1mA
17
VGS = -4.5V, ID = -9.2A ‚
mΩ VGS = -2.5V, ID = -7.4A ‚
21
30
VGS = -1.8V, ID = -4.6A ‚
-0.90
V
VDS = VGS, ID = -250µA
–––
S
VDS = -10V, ID = -9.2A
-1.0
VDS = -9.6V, VGS = 0V
µA
-25
VDS = -9.6V, VGS = 0V, TJ = 70°C
-100
nA VGS = -8.0V
100
VGS = 8.0V
57
ID = -9.2A
10
nC
VDS = -6.0V
12
VGS = -4.5V
–––
V
DD = -6.0V
ns
–––
ID = -1.0A
–––
RD = 6.0Ω
–––
VGS = -4.5V ‚
–––
VGS = 0V
–––
pF
VDS = -10V
–––
ƒ = 1.0MHz
Source-Drain Ratings and Characteristics
IS
ISM
VSD
trr
Qrr
Parameter
Continuous Source Current
(Body Diode)
Pulsed Source Current
(Body Diode) 
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Min. Typ. Max. Units
–––
–––
-2.0
–––
–––
-37
–––
–––
–––
–––
50
48
-1.2
75
72
A
V
ns
nC
Conditions
MOSFET symbol
showing the
G
integral reverse
p-n junction diode.
TJ = 25°C, IS = -2.0A, VGS = 0V ‚
TJ = 25°C, IF = -2.0A
di/dt = -100A/µs ‚
D
S
Notes:
 Repetitive rating; pulse width limited by
max. junction temperature.
ƒ When mounted on 1 inch square copper board.
‚ Pulse width ≤ 400µs; duty cycle ≤ 2%.
2
www.irf.com
IRF7329PbF
100
100
VGS
-10V
-7.0V
-4.5V
-3.0V
-2.5V
-1.8V
-1.5V
BOTTOM -1.2V
10
1
-1.2V
20µs PULSE WIDTH
TJ = 25 °C
0.1
0.1
1
10
-1.2V
10
2.0
RDS(on) , Drain-to-Source On Resistance
(Normalized)
-I D, Drain-to-Source Current (Α)
T J = 150°C
10
T J = 25°C
VDS = -10V
20µs PULSE WIDTH
1.8
-VGS, Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
www.irf.com
10
Fig 2. Typical Output Characteristics
100
1.4
1
-VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
1
20µs PULSE WIDTH
TJ = 150 °C
1
0.1
-VDS , Drain-to-Source Voltage (V)
1.0
VGS
-10V
-7.0V
-4.5V
-3.0V
-2.5V
-1.8V
-1.5V
BOTTOM -1.2V
TOP
-I D , Drain-to-Source Current (A)
-I D , Drain-to-Source Current (A)
TOP
2.2
ID = -9.2A
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = -4.5V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature ( °C)
Fig 4. Normalized On-Resistance
Vs. Temperature
3
IRF7329PbF
VGS = 0V,
f = 1 MHZ
Ciss = Cgs + Cgd, Cds SHORTED
Crss = Cgd
C, Capacitance(pF)
4000
Ciss
Coss = Cds + Cgd
3000
2000
Coss
1000
Crss
-VGS , Gate-to-Source Voltage (V)
10
5000
10
VDS =-9.6V
VDS =-6V
8
6
4
2
0
1
ID = -9.2A
0
100
0
10
-V DS, Drain-to-Source Voltage (V)
40
50
60
70
100
100
OPERATION IN THIS AREA LIMITED
BY RDS(on)
-II D , Drain Current (A)
-ISD , Reverse Drain Current (A)
30
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
10
TJ = 150 ° C
1
TJ = 25 ° C
0.1
0.2
0.4
0.6
0.8
Fig 7. Typical Source-Drain Diode
Forward Voltage
100us
10
1ms
10ms
TA = 25 ° C
TJ = 150 ° C
Single Pulse
V GS = 0 V
-VSD ,Source-to-Drain Voltage (V)
4
20
QG , Total Gate Charge (nC)
1.0
1
0.1
1
10
100
-VDS , Drain-to-Source Voltage (V)
Fig 8. Maximum Safe Operating Area
www.irf.com
IRF7329PbF
10.0
VDS
VGS
-ID , Drain Current (A)
8.0
RD
D.U.T.
RG
-
+
6.0
VDD
VGS
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
4.0
Fig 10a. Switching Time Test Circuit
2.0
td(on)
tr
t d(off)
tf
VGS
0.0
25
50
75
100
125
10%
150
TC , Case Temperature ( °C)
90%
Fig 9. Maximum Drain Current Vs.
Case Temperature
VDS
Fig 10b. Switching Time Waveforms
Thermal Response (Z thJA )
100
D = 0.50
0.20
10
0.10
0.05
PDM
0.02
1
0.01
t1
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak T J = P DM x Z thJA + TA
SINGLE PULSE
(THERMAL RESPONSE)
0.1
0.00001
0.0001
0.001
0.01
0.1
1
10
100
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient
www.irf.com
5
0.030
0.025
0.020
ID = -9.2A
0.015
0.010
0.0
2.0
4.0
6.0
-V GS, Gate -to -Source Voltage (V)
8.0
RDS (on) , Drain-to-Source On Resistance (Ω)
RDS(on) , Drain-to -Source On Resistance (Ω)
IRF7329PbF
0.030
VGS = -1.8V
0.025
0.020
VGS = -2.5V
0.015
VGS = -4.5V
0.010
4
6
8
10
12
14
-I D , Drain Current (A)
Fig 12. Typical On-Resistance Vs.
Gate Voltage
Fig 13. Typical On-Resistance Vs.
Drain Current
Current Regulator
Same Type as D.U.T.
50KΩ
QG
QGS
.2µF
.3µF
QGD
D.U.T.
+VDS
VGS
VG
-3mA
Charge
Fig 14a. Basic Gate Charge Waveform
6
12V
IG
ID
Current Sampling Resistors
Fig 14b. Gate Charge Test Circuit
www.irf.com
IRF7329PbF
100
0.8
80
ID = -250µA
Power (W)
-VGS(th) Gate threshold Voltage (V)
1.0
0.6
60
40
0.4
20
0.2
-75
-50
-25
0
25
50
75
100
T J , Temperature ( °C )
125
150
0
0.001
0.010
0.100
1.000
10.000
100.000
Time (sec)
Fig 15. Typical Vgs(th) Vs.
Junction Temperature
www.irf.com
Fig 16. Typical Power Vs. Time
7
IRF7329PbF
SO-8 Package Outline
Dimensions are shown in milimeters (inches)
D
DIM
B
5
A
8
6
7
6
H
E
1
2
3
0.25 [.010]
4
A
MIN
.0532
.0688
1.35
1.75
A1 .0040
.0098
0.10
0.25
b
.013
.020
0.33
0.51
c
.0075
.0098
0.19
0.25
D
.189
.1968
4.80
5.00
E
.1497
.1574
3.80
4.00
e
.050 BASIC
1.27 BASIC
e1
6X
e
e1
8X b
0.25 [.010]
A
MILLIMET ERS
MAX
A
5
INCHES
MIN
MAX
.025 BASIC
0.635 BAS IC
H
.2284
.2440
5.80
6.20
K
.0099
.0196
0.25
0.50
L
.016
.050
0.40
1.27
y
0°
8°
0°
8°
K x 45°
C
y
0.10 [.004]
A1
8X L
8X c
7
C A B
FOOT PRINT
NOT ES :
1. DIMENS IONING & T OLERANCING PER AS ME Y14.5M-1994.
8X 0.72 [.028]
2. CONT ROLLING DIMENS ION: MILLIMETER
3. DIMENS IONS ARE SHOWN IN MILLIMET ERS [INCHES ].
4. OUT LINE CONFORMS T O JEDEC OUT LINE MS-012AA.
5 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS .
MOLD PROT RUSIONS NOT T O EXCEED 0.15 [.006].
6 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS .
MOLD PROT RUSIONS NOT T O EXCEED 0.25 [.010].
6.46 [.255]
7 DIMENS ION IS T HE LENGT H OF LEAD FOR SOLDERING T O
A S UBS T RAT E.
3X 1.27 [.050]
8X 1.78 [.070]
SO-8 Part Marking Information (Lead-Free)
EXAMPLE: T HIS IS AN IRF7101 (MOSFET )
INT ERNAT IONAL
RECT IFIER
LOGO
XXXX
F 7101
DAT E CODE (YWW)
P = DES IGNAT ES LEAD-FREE
PRODUCT (OPTIONAL)
Y = LAST DIGIT OF T HE YEAR
WW = WEEK
A = AS SEMBLY S IT E CODE
LOT CODE
PART NUMBER
8
www.irf.com
IRF7329PbF
SO-8 Tape and Reel
Dimensions are shown in milimeters (inches)
TERMINAL NUMBER 1
12.3 ( .484 )
11.7 ( .461 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
NOTES:
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
330.00
(12.992)
MAX.
14.40 ( .566 )
12.40 ( .488 )
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. OUTLINE CONFORMS TO EIA-481 & EIA-541.
Data and specifications subject to change without notice.
This product has been designed and qualified for the Consumer market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.10/04
www.irf.com
9