IRF IRF7424PBF

PD- 95343
IRF7424PbF
HEXFET® Power MOSFET
l
l
l
l
l
Ultra Low On-Resistance
P-Channel MOSFET
Surface Mount
Available in Tape & Reel
Lead-Free
Description
RDS(on) max (mW)
ID
-30V
13.5@VGS = -10V
22@VGS = -4.5V
-11A
-8.8A
A
D
1
8
2
7
D
S
3
6
D
G
4
5
D
S
These P-Channel MOSFETs from International
Rectifier utilize advanced processing techniques to
achieve the extremely low on-resistance per silicon
area. This benefit provides the designer with an
extremely efficient device for use in battery and load
management applications..
VDSS
S
The SO-8 has been modified through a customized
leadframe for enhanced thermal characteristics and
multiple-die capability making it ideal in a variety of
power applications. With these improvements, multiple
devices can be used in an application with dramatically
reduced board space. The package is designed for
vapor phase, infrared, or wave soldering techniques.
SO-8
Top View
Absolute Maximum Ratings
Parameter
VDS
ID @ TA = 25°C
ID @ TA= 70°C
IDM
PD @TA = 25°C
PD @TA = 70°C
VGS
TJ, TSTG
Drain- Source Voltage
Continuous Drain Current, VGS @ -10V
Continuous Drain Current, VGS @ -10V
Pulsed Drain Current 
Power Dissipation ƒ
Power Dissipation ƒ
Linear Derating Factor
Gate-to-Source Voltage
Junction and Storage Temperature Range
Max.
Units
-30
-11
-9.3
-47
2.5
1.6
20
± 20
-55 to + 150
V
mW/°C
V
°C
Max.
Units
50
°C/W
A
W
Thermal Resistance
Parameter
RθJA
www.irf.com
Maximum Junction-to-Ambientƒ
1
10/04/04
IRF7424PbF
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
∆V(BR)DSS/∆TJ
Parameter
Drain-to-Source Breakdown Voltage
Breakdown Voltage Temp. Coefficient
RDS(on)
Static Drain-to-Source On-Resistance
VGS(th)
gfs
Gate Threshold Voltage
Forward Transconductance
IDSS
Drain-to-Source Leakage Current
IGSS
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
V(BR)DSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Ciss
Coss
Crss
Min.
-30
–––
–––
–––
-1.0
17
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
Typ.
–––
0.019
–––
–––
–––
–––
–––
–––
–––
–––
75
14
12
15
23
150
76
4030
580
410
Max. Units
Conditions
–––
V
VGS = 0V, ID = -250µA
––– V/°C Reference to 25°C, ID = -1mA
13.5
VGS = -10V, ID = -11A ‚
mΩ
22
VGS = -4.5V, ID = -8.8A ‚
-2.5
V
VDS = VGS, ID = -250µA
–––
S
VDS = -10V, ID = -11A
-15
VDS = -24V, VGS = 0V
µA
-25
VDS = -24V, VGS = 0V, TJ = 70°C
-100
VGS = -20V
nA
100
VGS = 20V
110
ID = -11A
21
nC
VDS = -15V
18
VGS = -10V
–––
VDD = -15V ‚
–––
ID = -1.0A
ns
–––
RG = 6.0Ω
–––
VGS = -10V
–––
VGS = 0V
–––
pF
VDS = -25V
–––
ƒ = 1.0kHz
Source-Drain Ratings and Characteristics
IS
ISM
VSD
trr
Qrr
Parameter
Continuous Source Current
(Body Diode)
Pulsed Source Current
(Body Diode) 
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Min. Typ. Max. Units
–––
–––
-2.5
–––
–––
-47
–––
–––
–––
–––
40
47
-1.2
60
71
A
V
ns
nC
Conditions
MOSFET symbol
showing the
G
integral reverse
p-n junction diode.
TJ = 25°C, IS = -2.5A, VGS = 0V
TJ = 25°C, IF = -2.5A
di/dt = -100A/µs ‚
D
S
‚
Notes:
 Repetitive rating; pulse width limited by
ƒ Surface mounted on 1 in square Cu board
max. junction temperature.
‚ Pulse width ≤ 400µs; duty cycle ≤ 2%.
2
www.irf.com
IRF7424PbF
1000
1000
VGS
-10V
-4.5V
-3.7V
-3.5V
-3.3V
-3.0V
-2.7V
BOTTOM -2.5V
-I D , Drain-to-Source Current (A)
-I D , Drain-to-Source Current (A)
100
10
1
-2.5V
20µs PULSE WIDTH
TJ = 25 °C
0.1
0.1
1
10
100
10
-2.5V
2.0
RDS(on) , Drain-to-Source On Resistance
(Normalized)
-I D , Drain-to-Source Current (A)
TJ = 150 ° C
10
TJ = 25 ° C
1
V DS = -15V
20µs PULSE WIDTH
3.5
4.0
4.5
Fig 3. Typical Transfer Characteristics
www.irf.com
10
100
Fig 2. Typical Output Characteristics
100
3.0
1
-VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
-VGS , Gate-to-Source Voltage (V)
20µs PULSE WIDTH
TJ = 150 °C
1
0.1
100
-VDS , Drain-to-Source Voltage (V)
0.1
2.5
VGS
-10V
-4.5V
-3.7V
-3.5V
-3.3V
-3.0V
-2.7V
BOTTOM -2.5V
TOP
TOP
5.0
ID = -11A
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = -10V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature ( °C)
Fig 4. Normalized On-Resistance
Vs. Temperature
3
IRF7424PbF
VGS = 0V,
f = 1MHz
Ciss = Cgs + Cgd , Cds SHORTED
Crss = Cgd
Coss = Cds + Cgd
C, Capacitance (pF)
5000
Ciss
4000
3000
2000
Coss
1000
Crss
12
-VGS , Gate-to-Source Voltage (V)
6000
0
1
10
ID = -11A
10
8
6
4
2
0
100
0
20
-VDS , Drain-to-Source Voltage (V)
60
80
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
100
100
OPERATION IN THIS AREA LIMITED
BY RDS(on)
TJ = 150 ° C
-IID , Drain Current (A)
-ISD , Reverse Drain Current (A)
40
QG , Total Gate Charge (nC)
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
10
1
100us
10
1ms
TJ = 25 ° C
0.1
0.4
V GS = 0 V
0.6
0.8
1.0
-VSD ,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
4
VDS =-24V
VDS =-15V
1.2
TA = 25 ° C
TJ = 150 ° C
Single Pulse
1
0.1
10ms
1
10
100
-VDS , Drain-to-Source Voltage (V)
Fig 8. Maximum Safe Operating Area
www.irf.com
IRF7424PbF
12
VDS
VGS
10
D.U.T.
RG
-ID , Drain Current (A)
RD
+
8
VDD
VGS
6
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
4
Fig 10a. Switching Time Test Circuit
2
td(on)
tr
t d(off)
tf
VGS
10%
0
25
50
75
100
125
150
TC , Case Temperature ( °C)
90%
Fig 9. Maximum Drain Current Vs.
Case Temperature
VDS
Fig 10b. Switching Time Waveforms
Thermal Response (Z thJA )
100
D = 0.50
0.20
10
0.10
0.05
0.02
1
0.01
PDM
t1
SINGLE PULSE
(THERMAL RESPONSE)
0.1
0.01
0.00001
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak T J = P DM x Z thJA + TA
0.0001
0.001
0.01
0.1
1
10
100
t1, Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient
www.irf.com
5
0.035
RDS (on) , Drain-to-Source On Resistance (Ω)
RDS(on) , Drain-to -Source On Resistance (Ω)
IRF7424PbF
0.030
0.025
0.020
ID = -11A
0.015
0.010
2.0
4.0
6.0
8.0
10.0
0.030
0.025
VGS = -4.5V
0.020
0.015
VGS = -10V
0.010
0
10
-V GS, Gate -to -Source Voltage (V)
Fig 12. Typical On-Resistance Vs.
Gate Voltage
20
30
40
50
60
-I D , Drain Current (A)
Fig 13. Typical On-Resistance Vs.
Drain Current
Current Regulator
Same Type as D.U.T.
50KΩ
QG
QGS
.2µF
.3µF
QGD
D.U.T.
+VDS
VGS
VG
-3mA
Charge
Fig 14a. Basic Gate Charge Waveform
6
12V
IG
ID
Current Sampling Resistors
Fig 14b. Gate Charge Test Circuit
www.irf.com
2.2
120
2.0
100
ID = -250µA
1.8
80
Power (W)
-V GS(th) Gate Threshold Voltage(V)
IRF7424PbF
1.6
60
1.4
40
1.2
20
1.0
0
-75
-50
-25
0
25
50
75
100
T J , Temperature ( °C )
Fig 15. Typical Vgs(th) Vs.
Junction Temperature
www.irf.com
125
150
0.001
0.010
0.100
1.000
10.000
100.000
Time (sec)
Fig 16. Typical Power Vs. Time
7
IRF7424PbF
SO-8 Package Outline
Dimensions are shown in millimeters (inches)
D
5
A
8
7
6
5
6
H
0.25 [.010]
1
2
3
A
4
MAX
MIN
.0532
.0688
1.35
1.75
A1 .0040
e
e1
0.25
.0098
0.10
.013
.020
0.33
0.51
c
.0075
.0098
0.19
0.25
D
.189
.1968
4.80
5.00
E
.1497
.1574
3.80
4.00
e
.050 BASIC
1.27 BASIC
.025 BASIC
0.635 BASIC
H
.2284
.2440
5.80
6.20
K
.0099
.0196
0.25
0.50
L
.016
.050
0.40
1.27
y
0°
8°
0°
8°
K x 45°
A
C
y
0.10 [.004]
8X b
0.25 [.010]
MAX
b
e1
6X
MILLIMETERS
MIN
A
E
INCHES
DIM
B
A1
8X L
8X c
7
C A B
F OOTPRINT
NOT ES :
1. DIMENS IONING & TOLERANCING PER ASME Y14.5M-1994.
8X 0.72 [.028]
2. CONT ROLLING DIMENS ION: MILLIMET ER
3. DIMENS IONS ARE SHOWN IN MILLIMETERS [INCHES].
4. OUTLINE CONFORMS TO JEDEC OUTLINE MS -012AA.
5 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS .
MOLD PROTRUS IONS NOT TO EXCEED 0.15 [.006].
6 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS .
MOLD PROTRUS IONS NOT TO EXCEED 0.25 [.010].
6.46 [.255]
7 DIMENS ION IS T HE LENGT H OF LEAD FOR SOLDERING TO
A S UBST RAT E.
3X 1.27 [.050]
8X 1.78 [.070]
SO-8 Part Marking
EXAMPLE: T HIS IS AN IRF7101 (MOSFET )
INT ERNAT IONAL
RECT IFIER
LOGO
XXXX
F7101
DAT E CODE (YWW)
P = DES IGNAT ES LEAD-FREE
PRODUCT (OPT IONAL)
Y = LAS T DIGIT OF T HE YEAR
WW = WEEK
A = AS S EMBLY S IT E CODE
LOT CODE
PART NUMBER
8
www.irf.com
IRF7424PbF
SO-8 Tape and Reel
Dimensions are shown in millimeters (inches)
TERMINAL NUMBER 1
12.3 ( .484 )
11.7 ( .461 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
NOTES:
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
330.00
(12.992)
MAX.
14.40 ( .566 )
12.40 ( .488 )
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. OUTLINE CONFORMS TO EIA-481 & EIA-541.
Data and specifications subject to change without notice.
This product has been designed and qualified for the Consumer market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.10/04
www.irf.com
9